精益生產手冊世界500強培訓精益生產系列中英文版教案資料

1、精益生產手冊世界500強培訓精益生產系列中英文版Standard Work & Standard Combination Sheet標準化作業標準化作業 & 標準作業合并表標準作業合并表1) Standard work defined 標準作業定義 a) Takt time defined 節拍時間的定義節拍時間的定義 b) Work sequence defined 工序的定義工序的定義 c) Standard WIP defined 標準在線庫存定義標準在線庫存定義d) Cycle time defined 周期時間定義 e) No of operators defined

2、 操作員數量的定義 f) Safety 安全性 g) Multi skill多技能 2) Standard work combination sheet defined 標準作業合并表定義a) Manual time手動時間b) Auto time機器(自動)時間c) Walking time走動時間d) Waiting time等待時間3) Is the Quality check legend defined on each process on std work sheet?標準作業合并表上，有定義每個流程中的品質管控的關鍵點嗎？3 Key Elements3項項關關鍵鍵要素要素3 Ty

3、pes of Standard Works3種標準作業種標準作業3 Types of Standard Works3種標準作業種標準作業Type 1 : Standard Work to support machine (90%) & man (10%) combination task.類型1：標準作業適用于90%的機器作業和10%的手動作業的組合作業方式。Type 2 : Standard Work to support man (90%) & machine (10%) combination task. 類型2：標準作業適用于90%手動作業和10%機器作業的組合作業方式

4、。Type 3 : Standard Work (also called as Work Standard) to support task carried out once signal is triggered.類型3：標準作業（也叫做作業標準）適用于當信號產生時才去執行相應任務的作業方式。No Std Work means no Kaizen Std Work is the Mother of all Kaizen沒有標準作業就沒有改善標準作業是改善之母How to start the Takt Time CalculationBased On Customer Demand 怎樣根據客

5、戶需求計算節拍時間 Step 1: Calculate Takt time Based on Customer Demand 第一步：根據客戶需求計算節拍時間 Example 例如:Customer Demand per Month 792K. Working hour per day is 22 hours, 20 days a month. 客戶每月需求量是792K。每天工作小時是22小時，一個月20天。Takt Time calculation shall display all the variable and units to make clarity to all. 計算節拍時間時

6、要顯示所有變量及單位，便于大家理解。計算節拍時間時要顯示所有變量及單位，便于大家理解。sec 2792,0001,584,000pcs 792,000s 3600 x days 20 x Hours 22 Demand Customer Time AvailableTime Takt客戶需求有效時間How to start the Takt Time CalculationBased On Product and Process Design怎樣根據產品和制程設計計算節拍時間Step 2: Calculate Process Takt time Based on Product and Pro

7、cess Design 第二步：根據產品和制程設計計算節拍時間Based on Step 1, Takt Time is 2 second to produce 1 pcs.根據步驟1，節拍時間是每 2 秒生產 1 件產品。How to start the Takt Time CalculationBased On Product and Process Design怎樣根據產品和制程設計計算節拍時間Scenario 1: Product design is 6 pcs per one PCB panel. The Process Takt Time will be every 12 seco

8、nd a panel. Besides, your process design is using a pallet to place 4 panels, then your Process Takt Time is 48 second a pallet. If 2 line running, process Takt time will be 96 sec.情節1：產品設計為每塊PCB板由 6 塊小板組成，節拍時間是每塊PCB板 12 秒; 制程設計治具同時放置 4 塊PCB板，則制程的節拍時間是 48 秒/治具。如果同時有 2 條生產線生產，制程的節拍時間則為 96 秒。Scenario

9、2: If Top and Bottom product running on same line at the same time, Takt time shall be half = 48sec情節情節2 2：如果正反面產品同時在一條生產線生產，節拍時間則為一半，：如果正反面產品同時在一條生產線生產，節拍時間則為一半，4848秒。秒。As such the Process Takt Time Calculation as following: 制程節拍時間計算如下：= Takt Time X Product Up x Process Up X Number of Line = 2 sec

10、X 6 products per panel X 4 Panel per pallet X 2 Lines= 96 sec What is Standard WIP什么是標準WIPVarious types of WIP in our manufacturing process 生產過程中存在各種類型的WIPStandard WIP 標準WIPProcess WIP制程WIPProcess To Process WIP制程與制程間WIP1.Station To Station WIP工位與工位間WIPWhat is Standard WIP什么是標準WIP WIP means INVENTOR

11、Y. INVENTORY is Basically bad. WIP就是庫存。庫存從根本上說是就是庫存。庫存從根本上說是“不好不好”的。的。 Standard WIP is the Ideal or Should be conditions for WIP標準WIP是理想WIP或者是WIP的應有狀態。 However, before you fully achieved Standard WIP Quantity, you might need to go through various stages to understand your process Muda and bottle nec

12、k然而，在完全達到標準WIP數量前，你需要經過不同的階段了解制程中的浪費和瓶頸。Key Note from Sensei: 老師的重要提示：老師的重要提示： To understand the above WIP definitions, go to The Genba and perform your own work towards Establishing the right WIP quantities. This is the Only way you can understand the definition. 要理解要理解WIP定義，你需要去到現場在工作中實踐正確的定義，你需要去

13、到現場在工作中實踐正確的WIP數量。數量。這是讓你理解這個定義的唯一方法。這是讓你理解這個定義的唯一方法。What is Standard WIP什么是標準WIPThe purpose of Standard WIP is:標準WIP的目的：Separation between machine job and man job 區分機器作業和手動作業Ensures quality requirements確保質量要求Ensures smooth flow based on Takt time確保基于節拍時間的連續流Example 1: 例子1WIP in the reflow oven for

14、curing with process time 6 min and Takt time 30 sec.在回流焊爐中固化的WIP，制程時間 6 min，節拍時間 30 sec.Standard WIP in the curing oven = Process Time / Takt Time 回流焊爐的標準WIP = 6 min / 30 sec = 12 PcsWhat is Standard WIP什么是標準WIPExample 2: 例子2WIP in the tester at backend assembly with process time 60 sec and Takt Tim

15、e 30 sec.后段組裝線測試機的WIP，制程時間 60 sec，節拍時間 30 sec.Standard WIP in the Test station = 60 sec/ 30 sec測試工位的標準WIP = 2 pcsIn other words, Standard WIP in order to fulfill the above 1), 2), 3) functions, It is the compulsory WIP in the machine / process before establish standard work for the process. 換句話說，標準W

16、IP能夠確保上述1),2),3)達成，在建立標準作業前，標準WIP是機器和制程強制的WIP。What is Standard WIP什么是標準WIPProcess WIP 制程WIPWIP within same process with low variation of cycle time同一個制程中的WIP，周期時間CT變化很小It is all that WIP in the same process, not categorized as Standard WIP or PTP WIP. 所有在同一個制程中的WIP，不是標準WIP或制程間WIP.Example:- 例如例如Befor

17、e Kaizen, Manual Insert (MI) Line Process WIP =9 pcs. After Kaizen MI Process WIP is 3. Standard WIP for each station is 1pc. 改善前，插件拉的制程WIP=9 pcs。改善后插件拉制程WIP=3pcs。每個工位的標準WIP為1pcs.T.T60 sec51455843PersonTimeABCDT.T60 sec60606012PersonTimeABCDvarianceAfterBeforeProcess WIP = 3, Standard WIP = 1 Proces

18、s WIP = 9, No standard WIP What is Standard WIP什么是標準WIPProcess To Process WIP (PTP WIP) 制程間WIPWIP between 2 different processes with big gap cycle time兩個周期時間相差很大的不同制程間的WIP.PTP WIP Is needed due to changeover in upstream line. 上游制程需要轉拉，則需設定制程間WIP. Not All line need PTP WIP.不是所有產線都需要制程間WIP.If Cycle ti

19、me of Upstream Process is Less then Down stream process 如果上游制程的周期時間小于下游制程的周期時間Example 1:- SMT Cycle time (30 sec) Less then Manual Insertion (60 sec)例1：SMT周期時間(30 sec)小于MI插件周期時間 (60 sec)CT (Upstream process) Need PTP WIP 需要制程間WIP If Cycle time Upstream process is Equal or greater then Down stream pr

20、ocess, No PTP WIP required. 如果上游制程的周期時間大于或等于下游制程的周期時間，不需要制程間WIP.節拍時間前工序機器轉拉時間制程間Time Takt Machine Previous of Changeover WIP WIPProcess to ProcessWhat is Standard WIP什么是標準WIPProcess To Process WIP制程間WIP節拍時間前工序機器轉拉時間程間制Time Takt Machine Previous of Changeover WIP WIPProcess to ProcessExample 2:- Proc

21、ess A cycle time 15 sec. It is faster then Process B cycle time 25sec. Process A is running 2 product models as capacity requirement. In order to Keep Process line running, process to process WIP is required between Process A and B. The calculation as below:-例2：制程A周期時間是15sec，比制程周期時間25sec快。制程A根據生產能力需

22、求，需要生產2種產品。為了保證產線正常運作，需要在制程A和制程B之間設定制程間WIP。計算如下：Takt Time = 30secChangeover Time = 5 min30secProcess AProcess Bpcs 10sec 3060sec x 5min WIPPTPTakt Time 節拍時間節拍時間Cycle time Takt time ( 1 Station Process )C/T than takt for single process (2 same stations needed)C/TTakt (需要2個相同工位)TAKT Time = 20s10203040

23、Machine/Process A : St. #1Machine/Process A : St. #2Note注: CT TT : Additional Machine/Man needed 需要額外的機器/人員It can be used to calculate 節節拍拍時間時間可以可以計計算算 Total Operators needed員工需求數量 Total machines needed機器需求數量 Standard WIP needed & Etc標準WIP需求數量，等Is the Takt time visible (with counter and triggeri

24、ng point)? 節拍時間可以直觀地看出來嗎？有沒有借助工具(計數器和觸發機制) 。2) Is the Takt board defined (on the board)? 節拍時間確定了嗎？(把節拍時間寫在白板上) 3) Are the Standard WIP defined? 標準WIP有定義嗎? 4) Do you know how to separate manual (persons) from auto (the machines) work? 你知道如何區分手動作業和自動作業嗎? 5) Is the Work load leveling defined for man，ma

25、chine and C/O? 人工,機器以及換線使用工作負荷均衡表分析了嗎？ 6) Is the H/C calculated based on Takt time? 人力的多少是根據節拍時間計算出來的嗎? 7) Is the Std work (front page) SWCS (back page) posted in front of each operator? 每個工站前都有標準作業(前頁)和標準作業合并表SWCS(背頁)嗎? Operations操作操作 Operations ( continue )操作操作(續頁續頁)8) Is the std work being follow

26、ed by the operator? 操作員有沒有按照標準作業流程作業? 9) Is the std work defined for water strider? 有沒有定義物料員的標準作業? 10) Is the operator idle at the station? 在作業過程中,操作員是否有等待? 11) Does the operator search for components or tools? - Locate all tools and parts within easy access or reach (Doctor & Nurse). 在作業中,操作員有沒

27、有尋找物料或工具的動作? 工具或物料應該放置在易于獲取的位置,定點定位.(遵循醫生和護士概念：Doctor醫生,指直接作業的人員,nurse護士,指輔助作業人員,如物料員) 12) Do you have std work for inspection station? 檢查工站有沒有標準作業書? 13) Do you have shortest cycle time for inspection? 對于檢查工站,有沒有定義最短周期時間? Operations ( continue )操作操作(續頁續頁)14) At the hand load station, do you apply do

28、ctor and nurse concept? 在手工作業工站,有沒有運用醫生和護士理念? 15) Do you meet the target of 3 sec per component during insertion at hand load? 在手插工站,有沒有達到每3 秒一顆零件的插件速度? 16) SIC less at hand load station (with template). 手插工站不需要SIC(用模板來顯示需要插件的位置)? Hand load manual CT Takt time nurse not required. Are there system in

29、 place to stop work when abnormal conditions arise? 當手動作業的周期時間小于節拍時間時，不需要”護士”(護士nurse:輔助作業人員) 當異常情況出現時，有沒有系統來控制停止作業? 18 ) Does the supervisor respond in a quick/crude manner? 當異常發生時，管理人員的反映是快速還是遲鈍? 19) Do you have 6S implemented on your line? 線上有實行6S嗎 ?(6S=5S+Safety) Operations ( continue )操作操作(續頁續頁

30、)20) Is the production qty for the day defined? 日產量有沒有定義? 21) Is the Multi skill charts visible and available? 有沒有顯示和使用多技能培訓表？22) Do you allow banana peeling on the line? 允許在線拆卸物料包裝嗎? 23) Are you able to detect bottleneck station at a glance? 瓶頸工站能一眼看出來嗎? 24) The operator must not re-orient the part

31、 操作員不允許重新調整零件方向,防止零件極性弄錯.(這里操作員指輔助作業人員,即nurse) 25) Change over : 快速換型a) Internal time 內部時間d) Adjustment time調整校準時間b) External time 外部時間e) Clean清潔c) Trial run試運行Operations ( continue )操作操作(續頁續頁)26) ETE Operation criteria: 端到端運行標準The line should run based on Takt time 生產線必須按照客戶需求節拍合理安排生產The H/C should

32、 be loaded based on Takt time 生產線應按客戶需求節拍時間合理安排人員Material should be loaded based on Takt time 按客戶需求節拍時間備置原材料The line should be configured to zero defects 配置生產線時需滿足零缺陷Supermarket should meet all the 15 criteria 超市必須符合15個設置準則27) ETE consists of : 端到端包括: a) Productivity improvement (MLT,H/C, WIP, Space

33、) 提高生產效率(生產前置期,科學的人員配置,適當?shù)脑诰€庫存,有效的空間利用)b) Material replenishment (Water strider, Min- Max, Supermarket) 靈活精益的原材料供給方式(水蜘蛛補貨原則，設置最低最高庫存，超市)c) Quality improvement (Zero defects) 提高質量(零缺陷)d) C/O (if the time more than 10 minutes) 換型時間(如果時間超過10分鐘)Operations ( continue ) 操作操作(續頁續頁)28) 4 functions of Conve

34、yor, Say NO to Conveyor if below criterias not meet“傳送帶”的4個功能， 如果不符合以下條件則不能使用“傳送帶”Function as a Pace Setter ( Takt Manufacturing ) 節拍調節器（節拍生產）Function as a Value adding work station ( Value being added as it moves)增值工位（傳送帶移動時產品可以增值，如在傳送帶上作業） Function as a Jidoka ( Stop every abnormal ) 自働化（異常時停止作業）F

35、unction as a transportation mode ( 5% of the function ) 傳送作用（只占（只占5%的功能）的功能）Layout 布局布局1) Insure the short walking distance. 確保產線行走距離短. 2) Do you have 3 TEI implemented on your line? 產線有沒有對物品實施三定原則? a) Fix place 定點b) Fix things 定位/定物 c) Fix qty 定量3) Is the safety aisle easily accessed by the operato

36、r? 安全通道是否易于員工通過? 4) Are there trash bins inside the cell? 單元生產線內有沒有垃圾箱? 5) Do you have cell concept implemented on your line? 有沒有在生產線上應用單元生產的概念.Layout ( continue ) 布局布局(續頁續頁)6) The operator movement in a cell : is it counter clock wise(1) or clockwise(0). Counter clock wise is recommended 操作員在單元內的移動

37、是逆時針還是順時針(逆時針為佳) 7) The gap in a cell : is it wider(0) or narrower(1) (narrower recommended). 單元內工站間的間距合適的嗎?寬(0) 還是窄(1) (推薦用窄).8) Is the station made of crefoam material and is it on the wheel for flexible movement? 工作臺是由復合管做成的嗎 ?是否有滑輪易于移動呢? 9) The flow of a layout must be like a single stroke, no z

38、igzag. 產線布局的流向必須是單行程的，而不是彎曲交錯的。10) Do you use 7 ways when designing tools, jigs, fixtures, layout or process? 在設計工具,夾具,治具,工廠布局和流程時有沒有采用7種方法(7 ways)? 11) Do you use Pugh matrix to evaluate 7ways? 有沒有使用Pugh matrix來評估7種方法? .Layout ( continue ) 布局布局(續頁續頁)12) Hand load station should meet the below requi

39、rements :手動作業工站應該滿足以下要求: a) Part presentation 物料擺放方式 b) Zero defect 物料品質零缺陷 c) Layout /Ergonomic, 插件的順序/根據人機工程學來安排d) Both hands of operator have to be used during insertion 插件時要雙手作業 13) Are the cables, wires and network using the overhead drop point for flexibility?電線,網線,信號線是否架設在線體上端并連接到產線，易于靈活使用? 1

40、4) Do you use the Spaghetti Chart to do the layout, process, movement? 在設計layout，流程,行走路線時有沒有使用到Spaghetti Chart(意大利面條圖)工具,清晰的畫出人流、物流及產品流路線? 15) Is the line visibility clear for the supervisor? (boarder post defined for clear visibility) 對于管理者來說，產線可視化嗎?(定義看板使其清晰可視化) 16) Do you use mock-up layout? 有沒有模

41、擬layout實施后的情況嗎? 17) Tree and Branch connecting sub assembly & main assembly 主干和枝條 主裝配線和輔助裝配線的合理銜接Layout ( continue ) 布局布局(續頁續頁)18) Short Takt time 1minute, multiply takt time by (x) factor and duplicate the backend cell accordingly客戶節拍時間太短小于 1 分鐘時，增大節拍時間 X 倍并建立相應數量的相同的單元產線。19) Do your work stati

42、ons are in same height ?工作臺都是同一個高度嗎？20) Do you carry out “rope test” to validate the continuous value flow ?有實施“繩子測試”驗證連續價值流嗎？Zero Defect 零缺陷零缺陷Can normal and abnormal be visually differentiated? 正常和異常現象易于區分嗎 ? 2) Are the escalation paths well defined if abnormality occurs? 針對異常的發生,有沒有制定出逐級上報的流程? 3)

43、 Are the defects allowed to escape to down stream? 有沒有不良流入下一工站? a) Do not pass defect ( Downstream Internal or To End Customer ) 不流出不良品不流出不良品 (內部下游客戶或終端客戶) b) Do not make defect( In Own Process ) 不制造不良品不制造不良品（自己的工位）c) Do not accept defect ( From Upstream) 不接收不良品不接收不良品（從上游工序） d) Do not rework ( Not B

44、uild Product Via Rework ) 不允許返工不允許返工（不通過返工生產產品）4) Do you have a common area to view the defect (fish market)? 有沒有特定的地點來檢討不良?(fish market 魚市場) Zero Defect ( continue ) 零缺陷零缺陷(續頁續頁)5) Do you apply 3 Gens? 有沒有做到三 現? a) Genba - Actual place 現場 b) Genbutsu - Actual product 現物 c) Genjitsu - Actual fact 現實

45、6) Do you use 5 W ( who, what , where, when, why)+1H (how) where rule and regulation applied? 規章制度的制定有沒有運用5W+1H的方法? 7) Do you have hand free inspection station? 視檢工站,有沒有不需要用手的? 8) Do you have template with navigation or pointer to guide inspection operators? 有沒有模板來輔助視檢作業？ Zero Defect ( continue ) 零缺

46、陷零缺陷(續頁續頁)9) Do you apply SDCA,PDCA? and for defects do you apply PDCA? (Problem,Display,Clear & acknowledge) SDCA ( Standardize, Do, Check & Action ) 工作中有沒有運用 SDCA、PDCA方法？針對不良現象，有沒有運用PDCA的方法？ 10) Do you have Kaizen Newspaper displayed? 改善活動的海報有沒有展示出來? 11) Do you have 1hr, 2hr, 4hr, 8hr trac

47、king system on the floor? (lead to zero defect) 產線有沒有跟蹤系統，隨時了解每1小時，每2小時，每4小時，每8小時的狀況？(向零缺陷靠近) 12) Identify POO & POD to solve the problem 當問題發生時,鑒別出問題的起源(POO)和問題的發現點(POD)來解決問題. POO=point of origin (where is the first point are the cause problem) POD=point of detection (where the point the proble

48、m been captured) 13) Learn how to make the defect to understand root cause 研究如何會產生不良, 從而了解根本原因。 Zero Defect ( continue )零缺陷零缺陷(續頁續頁)14) Do you have Auto Jidoka implemented in your line? 產線有沒有運用自働化系統？ 15) Talk to the defect to understand the root cause 深入研究不良或缺陷，找出根本原因 16) Duplicate the defect to und

49、erstand the root cause 多次重復不良現象的發生，找到根本原因。 17) Do you have mean test ? - challenge the current state (Potential Problem Analysis) 有運用均值檢驗嗎? 對現狀進行尋根究底(分析潛在的問題)18) Do you use 5 Why analysis to understand the root cause? 有沒有運用5個為什么來分析根本原因？ 19) Landscape concept View from all angles (the mountain) ,Sear

50、ch for the truth (the forest), Look/Focus (the tree), See and fix it (the branch) 全局概念-全方位-遠看(山)，尋找真相-近觀(森林)，細看(樹)，深究并解決問題(枝干)One Piece Flow 單件流單件流 1) One piece flow 單件流2) Are the line visibility clear for the supervisor? Std.WIP? Takt counter? Line flow? 對于管理者來說，產線狀況可視化嗎？有標準WIP?節拍計數器？產線是流動的嗎？3) One

51、 piece flow which like as the eggs inside the chicken should be one by one flow ,but not in parallel. 單件流就像母雞肚里的雞蛋一樣是一個一個下蛋的，而不是一起下出來的。4) To shorten the information of defect feedback, one piece flow can reduce our lead time. 為縮短不良現象的信息反饋，單件流可以幫助減少前置時間。5) When we set up new layout ,we must consider

52、use the one piece flow. 當建立新的生產線布局時，必須考慮使用單件流。6) The Ideally layout is one piece flow according our Takt time. 理想產線布局是按照節拍時間的單件流。7) The layout of “ Y” is better than the layout “ I I I ” series “Y”型布局比“I I I ”型布局好。8) As the quality feedback is fast and quick action taken. 品質反饋速度快，能夠快速響應采取行動。VSM 價值流圖

53、價值流圖Do you have value stream done on your product?1. 產線有沒有做價值流分析？a) have you visualized improvements to the overall production flow, instead of spot improvements to single processes 有沒有把所有產線流程存在改善空間的地方明顯地標識出來，而不是僅標示某個地方。 b) have you created a complete material and information flow 有沒有規劃出完整的物料流和信息流 c

54、) current state - how the process works today 現狀-產線現在是如何運作的 d) future state - map shows improvements towards a long term ideal state 未來的情況-價值流圖表示出改善之后的理想狀況 e) 3D VSM for better visualization (for office kaizen) 3D價值流圖使流程更加直觀（針對辦公室改善） VSM ( continue )價值流圖價值流圖(續頁續頁)2) 7 types of flow must be clearly d

55、efined : 7大流程必須定義清楚 a) Material Raw物料-原材料 b) Material WIP 物料-在線庫存 c) Material - Finish Goods 物料-成品 d) Information - what info is required to move materials, what is the timing 信息-移動/搬運物料時需要什么信息，什么時間點e) People - std.work, Takt time 人流-標準作業，節拍時間 f) Equipment - carts, conveyor, racks, andons, TPM 設備流-手

56、推車，傳送帶，物料架，andons 異常停線系統，全面生產維護(TPM=Total Productive Maintenance) g) Engineering - quality, tooling, programs 工程-品質，工具，程序 Moonshine Shop 月光工作室月光工作室1) Do you have moonshine capability in your plant? 工廠有沒有月光工作室可以自己動手制作治具或工具以及時滿足產能需求的能力.? Golf Score 動作評估表動作評估表Are the operators having to bent down? 操作員在

57、作業過程中需要彎腰嗎? 2) Are operators having to reach high? 操作員的手需要伸到很高的位置(獲取物料或工具)來完成作業嗎？ 3) Are operators having to twist/turn? 操作員在作業過程中需要轉身嗎? 4) Are operators leaving work area? 操作員在作業過程中離開工作區嗎? 5) Are operators needing 3 arms?(hand being used as fixtures) 操作員必須依靠三只手才能完成作業嗎?（第三只指的是治具） 6) Is the C/T set a

58、t 90% or less of the Takt time? 周期時間是設定在節拍時間的90%還是低于節拍時間？ C/T= cycle time， T/T=Takt time 7) Is there rework being done? 返工有沒有在做？Machine 設備設備Are tools suspended above point-of-use? 工具有沒有懸掛在使用點(觸手可及之處)？ 2) Are proper gauges/fixtures used? 所用到的治具是否合適？ 3) Are distances between stations held at minimum?

59、工站間距離是否是最短的？ 4) Are there 2 or more stations for each operators work? 操作員是否有操作2個或更多工站？ 5) Is there an aisle way and cart for the water strider? 物料員是否有專用通道和專用推車？ 6) Is there information being sent to the water strider in real time? 發送給物料員的信息是否實時？ 7) Is there an andon lamp installed? 有沒有安裝異常警示燈？( Ando

60、n lamp,異常警示燈) Machine ( continue ) 設備設備(續頁續頁)8) Is a production control board in place? 產線有沒有看板，易于及時且清楚地了解產線的狀況? 9) Can you separate internal setup from external setup and externalize internal setup? 你能區分內部信息和外部信息，并使內部信息具體化嗎？ 比如：換線時的內部時間與外部時間 比如：某些機器的參數我們自己可以設定，有些需要求助于供應商 10) Be sure that material flows in one direction. 確保物流同方向，不迂回. 11) Is your mac