st42_RB模擬課件_第1頁
st42_RB模擬課件_第2頁
st42_RB模擬課件_第3頁
st42_RB模擬課件_第4頁
st42_RB模擬課件_第5頁
已閱讀5頁,還剩5頁未讀, 繼續免費閱讀

下載本文檔

版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領

文檔簡介

1、enba able 14Password:RACK5-RSR20-1#conEnter configuration commands, one per line. End with CNTL/Z.RACK5-RSR20-1(config)#hos RARA(config)#RA(config)#RA(config)#in IN neterface serial 2/0 1/0% Unknown command.RA(config)#Ineterface serial 1/0 Ineterface hos RA Ineterface hos RA Ineterface s i show% Inc

2、omplete command.RA(config)#show inet r terface staty us % Invalid input detected at '' marker.RA(config)#show interface status at rts sh ip int bInterface IP-Address(Pri) IP-Address(Sec) Status Protocol Serial 2/0 no address no address up down Serial 4/0 no address no address down down FastE

3、thernet 0/0 no address no address down down FastEthernet 0/1 no address no address up down RA(config)#RA(config)#ine terface sr et rial 2/0RA(config-if-Serial 2/0)#ip address 12.11 .1.1/30 255.255.255.0 252RA(config-if-Serial 2/0)#no shui tdownRA(config-if-Serial 2/0)#exitRA(config)#interface serial

4、 2/0RA(config)#sh ip int b ow interface statusRA(config)#sh ip int b ow interface statusRA(config)#show RA(config)#show interface statusRA(config)#sh ip int b interface serial 2/0 0/1 % Invalid input detected at '' marker.RA(config)#interface serial 0/1 2/1 FastTR R Ethernet 0 1/0 0/1RA(conf

5、ig-if-FastEthernet 0/1)#exitno shutdownip address 12.1.1.1 255.255.255.25222.1.1.1 255.255.255.252 2.1.1.1 255.255.255.252 1.1.1.1 255.255.255.2521.1.1.1 255.255.255.252.11.1.1.1 255.21 255.255.255.252 2 255.255.255.252RA(config-if-FastEthernet 0/1)#no shutdownRA(config-if-FastEthernet 0/1)#exitRA(c

6、onfig)#sh ip int bInterface IP-Address(Pri) IP-Address(Sec) Status Protocol Serial 2/0 12.1.1.1/30 no address up up Serial 4/0 no address no address down down FastEthernet 0/0 no address no address down down FastEthernet 0/1 11.1.1.2/30 no address up up RA(config)#RA(config)#RA(config)#RA(config)#pi

7、 RA(config)#RA(config)#hoRA(config)#hostname RBRB(config)#RB(config)#RB(config)#conf t% Unknown command.RB(config)#RB(config)#int s int s2/0RB(config-if-Serial 2/0)#ipp ip a ip ip add 12.1.1.2 2552.55.2 .255.255.252RB(config-if-Serial 2/0)#RB(config-if-Serial 2/0)#RB(config-if-Serial 2/0)#int f0/1RB

8、(config-if-FastEthernet 0/1)#ip add 99.99 .9.1 255.255.2552 .240RB(config-if-FastEthernet 0/1)#RB(config-if-FastEthernet 0/1)#RB(config-if-FastEthernet 0/1)#exitRB(config)#RB(config)#RB(config)#sh ip int bInterface IP-Address(Pri) IP-Address(Sec) Status Protocol Serial 2/0 12.1.1.2/30 no address up

9、up Serial 4/0 no address no address down down FastEthernet 0/0 no address no address down down FastEthernet 0/1 99.9.9.1/28 no address up up RB(config)#RB(config)#RB(config)#RB(config)#RB(config)#sh ip int bInterface IP-Address(Pri) IP-Address(Sec) Status Protocol Serial 2/0 12.1.1.2/30 no address u

10、p up Serial 4/0 no address no address down down FastEthernet 0/0 no address no address down down FastEthernet 0/1 99.9.9.1/28 no address up up RB(config)#router ripRB(config-router)#ver 2RB(config-router)#no auRB(config-router)#RB(config-router)#RB(config-router)#net 17 2.1.1.0 0.0.0.3RB(config-rout

11、er)#net 99.9.9.0 0.0.0.23RIP: Invalid address/mask combination (discontiguous mask)RB(config-router)#RB(config-router)#RB(config-router)#net 99.9.9.0 0.0.0.23 4RIP: Invalid address/mask combination (discontiguous mask)RB(config-router)#net 99.9.9.0 0.0.0.24 15RB(config-router)#RB(config-router)#RB(c

12、onfig-router)#RB(config-router)#RB(config-router)#sh run Building configuration.Current configuration : 947 bytes!version RGOS 10.3(5b6), Release(132193)(Thu Mar 22 18:30:26 CST 2012 -ngcf67)hostname RB!no service password-encryption! -More- !control-plane!control-plane protocol no acpp!control-plan

13、e manage no port-filter no arp-car no acpp!control-plane data no glean-car no acpp! -More- !interface Serial 2/0 encapsulation HDLC ip address 12.1.1.2 255.255.255.252!interface Serial 4/0 encapsulation HDLC clock rate 64000!interface FastEthernet 0/0 duplex auto speed auto!interface FastEthernet 0/

14、1 ip address 99.9.9.1 255.255.255.240 duplex auto speed auto! -More- !router rip version 2 network 12.1.1.0 0.0.0.3 network 99.9.9.0 0.0.0.15 no auto-summary!ref parameter 50 400line con 0 logging synchronous exec-timeout 0 0line aux 0line vty 0 4 login! -More- !endRB(config-router)#RB(config-router

15、)#RB(config-router)#RB(config-router)#RB(config-router)#RB(config-router)#exot itRB(config)#userRB(config)#username RA passRB(config)#username RA password ruijieRB(config)#RB(config)#int s2/0RB(config-if-Serial 2/0)#RB(config-if-Serial 2/0)#encRB(config-if-Serial 2/0)#encapsulation pppp % Invalid in

16、put detected at '' marker.RB(config-if-Serial 2/0)#encapsulation pppp RB(config-if-Serial 2/0)#ppp auRB(config-if-Serial 2/0)#ppp authentication chRB(config-if-Serial 2/0)#ppp authentication chap RB(config-if-Serial 2/0)#RB(config-if-Serial 2/0)#RB(config-if-Serial 2/0)#RB(config-if-Serial 2

17、/0)#RB#*Jul 5 11:48:24: %SYS-5-CONFIG_I: Configured from console by console *Jul 5 11:48:24: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial 2/0, changed state to down. RB#RB#RB#RB#RB#*Jul 5 11:48:26: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial 2/0, changed state to up. RB#sh ip in

18、t bInterface IP-Address(Pri) IP-Address(Sec) Status Protocol Serial 2/0 12.1.1.2/30 no address up up Serial 4/0 no address no address down down FastEthernet 0/0 no address no address down down FastEthernet 0/1 99.9.9.1/28 no address up up RB#RB#RB#RB#RB#RB#ping 12/0-/- .0.0 .1 1.1.1Sending 5, 100-by

19、te ICMP Echoes to 12.1.1.1, timeout is 2 seconds: < press Ctrl+C to break >!Success rate is 100 percent (5/5), round-trip min/avg/max = 30/32/40 msRB#RB#RB#ip route conf conf tEnter configuration commands, one per line. End with CNTL/Z.RB(config)#RB(config)#RB(config)#RB(config)#RB(config)#ip

20、route 0.0.0.0 0.0.0.0 99.9.9.2 RB(config)#RB(config)#RB(config)#RB(config)#RB(config)#RB(config)#RB(config)#ji ip a sh r access-lRB(config)#access ip access-lRB(config)#ip access-list exRB(config)#ip access-list extended 100RB(config-ext-nacl)#per ip per tcp RB(config-ext-nacl)#RB(config-ext-nacl)#R

21、B(config-ext-nacl)#RB(config-ext-nacl)#exitRB(config)#RB(config)#RB(config)#int router ripRB(config-router)#no netRB(config-router)#no network 9. 90 .9.9.0 0.0.0.15RB(config-router)#RB(config-router)#reRB(config-router)#redistribute sRB(config-router)#redistribute static RB(config-router)#RB(config-

22、router)#RB(config-router)#exitRB(config)#RB(config)#conf t% Unknown command.RB(config)#RB(config)#router ripRB(config-router)#no reRB(config-router)#no redistribute stRB(config-router)#no redistribute static RB(config-router)#RB(config-router)#e% Ambiguous command: "e"RB(config-router)#xit

23、% Unknown command.RB(config-router)#RB(config-router)#RB(config-router)#RB(config-router)#RB(config-router)#exitRB(config)#RB(config)#RB(config)#RB(config)#router ripconf t router ripip access-list extended 100RB(config)#sh access-l ip access-list extended 100RB(config-ext-nacl)#per 17 tcp 172.16.20

24、.0 0.0.0.255 host 99.9.9.2 eq ftRB(config-ext-nacl)#RB(config-ext-nacl)#RB(config-ext-nacl)#deny tcp ip 172.16.20.0 0.0.0.025 255 hoRB(config-ext-nacl)#deny ip 172.16.20.0 0.0.0.255 host 99.9.9.2RB(config-ext-nacl)#RB(config-ext-nacl)#RB(config-ext-nacl)#RB(config-ext-nacl)#deny ip 172.16.30.0 0.0.0

25、.255 hot RB(config-ext-nacl)#deny ip 172.16.30.0 0.0.0.255 host 99.9.9.2RB(config-ext-nacl)#RB(config-ext-nacl)#RB(config-ext-nacl)#RB(config-ext-nacl)#ope per ip 172.16.30.0 0.0.0.02 255 anyRB(config-ext-nacl)#RB(config-ext-nacl)#per ip any anyRB(config-ext-nacl)#RB(config-ext-nacl)#RB(config-ext-n

26、acl)#RB#*Jul 5 11:51:13: %SYS-5-CONFIG_I: Configured from console by console RB#RB#RB#RB#conf tEnter configuration commands, one per line. End with CNTL/Z.RB(config)#int s2/0RB(config-if-Serial 2/0)#RB(config-if-Serial 2/0)#ip acces 100 inRB(config-if-Serial 2/0)#RB(config-if-Serial 2/0)#RB(config-i

27、f-Serial 2/0)#RB(config-if-Serial 2/0)#RB#*Jul 5 11:51:21: %SYS-5-CONFIG_I: Configured from console by console RB#RB#RB#wrBuilding configuration.OKRB#RB#RB#ping 172.16.20.254Sending 5, 100-byte ICMP Echoes to 172.16.20.254, timeout is 2 seconds: < press Ctrl+C to break >!Success rate is 100 pe

28、rcent (5/5), round-trip min/avg/max = 30/32/40 msRB#ping 172.16.20.25410.2540.254 0.254 10.254Sending 5, 100-byte ICMP Echoes to 172.16.10.254, timeout is 2 seconds: < press Ctrl+C to break >!Success rate is 100 percent (5/5), round-trip min/avg/max = 30/32/40 msRB#ping 11.1.1.1Sending 5, 100-byte ICMP Echoes to 11.1.1.1, timeout is 2 seconds: < press Ctrl+C to break >!Success rate is 100 percent (5

溫馨提示

  • 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
  • 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
  • 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
  • 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
  • 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
  • 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
  • 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。

評論

0/150

提交評論