浙江理工大學計算機網絡課程設計

1、計算機網絡課程設計 (2013/2014第二學期-第18周)指導教師：張芳 舒挺班級：姓名：學號：一、目的和要求本課程設計的主要目的是通過實際操作和實驗以及編程等，加深對課堂所學知識的理解，提高對網絡系統的感性認識，培養動手技能和自學能力。本課程設計通過完成彼此具有獨立性又相互聯系的幾個小實驗，能夠?qū)W(wǎng)絡相關設備和服務器進行安裝和配置，對網絡設計的概念有個比較完整的認識。二、實驗環境本實驗主要應用軟件來仿真實際的路由網絡，選用的軟件有選用的軟件包括RouterSim CCNA 2、Boson Netsim和RouterSim。三、具體內容1.熟悉實驗環境通過參考軟件中自帶的幫助、參考資料和教師

2、的講解等，熟悉模擬器操作的常用命令。對配置模式、配置參數的查看、保存、清除等進行了解。2.網絡拓?fù)鋱D的設計熟悉不同網絡設備以及相關的接口，如：路由器、交換機、主機，學習利用不同網絡設備搭建網絡系統。3.網絡路由器不同端口的配置學習如何對網絡路由器的以太網接口、快速以太網接口、串行接口以及相關參數的配置，以及環回接口、令牌環接口的配置。并且能夠?qū)ε渲媒Y(jié)構進行驗證。配置路由器的各種網絡接口配置Ethernet接口配置路由器A與路由器2621的Ethernet接口，并通過ping來測試！4.靜態路由的配置復習路由的概念，學習靜態路由的設置，默認路由的設置，以及已有路由的刪除。5動態路由的配置復習動態

3、路由協議，深入掌握RIP協議的原理，能夠進行動態RIP路由設置，并對設置的結果進行驗證，查看。實驗1 使用RouterSim CCNA配置路由器的各種網絡接口（同時也使用了靜態路由配置，使兩端主機ping通）1.Switch1900Router Con0 is now availablePress RETURN to get started.PCA Number: 73-3122-04PCA Serial Number: FAB0337240KModel Number: WS-C1912-ASystem Serial Number: FAB0339U01UPower Supply S/N: P

4、HI031803JKPCB Serial Number: FAB0337240K,73-3122-04-1 user(s) now active on Management Console. User Interface Menu M Menus K Command Line I IP ConfigurationEnter Selection: PCA Number: 73-3122-04PCA Serial Number: FAB0337240KModel Number: WS-C1912-ASystem Serial Number: FAB0339U01UPower Supply S/N:

5、 PHI031803JKPCB Serial Number: FAB0337240K,73-3122-04-1 user(s) now active on Management Console. User Interface Menu M Menus K Command Line I IP ConfigurationEnter Selection: PCA Number: 73-3122-04PCA Serial Number: FAB0337240KModel Number: WS-C1912-ASystem Serial Number: FAB0339U01UPower Supply S/

6、N: PHI031803JKPCB Serial Number: FAB0337240K,73-3122-04-1 user(s) now active on Management Console. User Interface Menu M Menus K Command Line I IP ConfigurationEnter Selection: CLI session with the switch is open. To end the CLI session, enter Exit.Router>enRouter#config tEnter configuration com

7、mands, one per line. End with CNTL/Z.Router(config)#hostname switch 1900A1900A(config)#hostname switch1900Aswitch1900A(config)#ip address 172.16.10.3 255.255.255.0switch1900A(config)#ip defalut-gateway 172.16.10.1% Invalid input detected at '' marker.switch1900A(config)#ip default-gateway 17

8、2.16.10.1switch1900A(config)#endswitch1900A#1.Router2621（由于第一次做的時候前面命名忘記了，在后面補的命名）Router Con0 is now availablePress RETURN to get started.Router>enRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#interface f0/1Router(config-if)#ip address 172.16.10.4 255.2

9、55.255.0Router(config-if)#no shut%LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to upRouter(config-if)#exitRouter(config)#interface f0/0Router(config-if)#ip address 172.16.11.4 255.255.255.0Router(config-if

10、)#no shut%LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to upRouter(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleRouter#config tEnter configuration commands, one per line. End with CNTL/

11、Z.Router(config)#ip route 172.16.50.0 255.255.255.0 172.16.11.5（靜態）Router(config)#ip route 172.16.40.0 255.255.255.0 172.16.11.5Router(config)#ip route 172.16.20.0 255.255.255.0 172.16.11.5Router(config)#endRouter#copy run startBuilding configuration.OKRouter#show ip routeCodes: C - connected, S - s

12、tatic, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate d

13、efault U - per-user static route, o - ODRGateway of last resort is not set 172.16.0.0/24 is subnetted, 5 subnetsS 172.16.50.0 1/0 via 172.16.11.5S 172.16.40.0 1/0 via 172.16.11.5S 172.16.20.0 1/0 via 172.16.11.5C 172.16.10.0 is directly connected, FastEthernet0/1C 172.16.11.0 is directly connected,

14、FastEthernet0/0Router#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname route2621route2621(config)#endroute2621#1.RouterA（同樣補了命名）Router Con0 is now availablePress RETURN to get started.Router>enRouter#config tEnter configuration commands, one per line. En

15、d with CNTL/Z.Router(config)#interface e0Router(config-if)#ip address 172.16.11.5 255.255.255.0Router(config-if)#no shut%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up%LINK-3-UPDOWN: Interface Ethernet0, changed state to upRouter(config-if)#exitRouter(config)#interface

16、 s0Router(config-if)#ip address 172.16.20.5 255.255.255.0Router(config-if)#no shut%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up%LINK-3-UPDOWN: Interface Serial0, changed state to upRouter(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleRouter#config tE

17、nter configuration commands, one per line. End with CNTL/Z.Router(config)#interface s0Router(config-if)#encap pppRouter(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleRouter#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP

18、external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODRGateway of last resort is n

19、ot set 172.16.0.0/24 is subnetted, 2 subnetsC 172.16.20.0 is directly connected, Serial0C 172.16.11.0 is directly connected, Ethernet0Router#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#ip route 172.16.10.0 255.255.255.0 172.16.11.4（靜態）Router(config)#ip route 17

20、2.16.50.0 255.255.255.0 172.16.20.6Router(config)#ip route 172.16.40.0 255.255.255.0 172.16.20.6Router(config)#end%SYS-5-CONFIG_I: Configured from console by consoleRouter#copy run startBuilding configuration.OKRouter#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B -

21、BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODRG

22、ateway of last resort is not set 172.16.0.0/24 is subnetted, 4 subnetsS 172.16.50.0 1/0 via 172.16.20.6S 172.16.10.0 1/0 via 172.16.11.4C 172.16.20.0 is directly connected, Serial0C 172.16.11.0 is directly connected, Ethernet0Router#config tEnter configuration commands, one per line. End with CNTL/Z

23、.Router(config)#hostname routeArouteA(config)#end%SYS-5-CONFIG_I: Configured from console by consolerouteA#1.RouterBRouter Con0 is now availablePress RETURN to get started.Router>enRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#interface s0Router(config-

24、if)#ip address 172.16.20.6 255.255.255.0Router(config-if)#no shut%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up%LINK-3-UPDOWN: Interface Serial0, changed state to upRouter(config-if)#encap pppRouter(config-if)#clock rate 64000Router(config-if)#end%SYS-5-CONFIG_I: Config

25、ured from console by consoleRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#interface s1Router(config-if)#ip address 172.16.40.6 255.255.255.0Router(config-if)#no shut%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to up%LINK-3-UPDOWN:

26、 Interface Serial1, changed state to upRouter(config-if)#encap pppRouter(config-if)#clock rate 64000Router(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#ip route 172.16.10.0 255.255.255.0 172

27、.16.20.5（靜態）Router(config)#ip route 172.16.11.0 255.255.255.0 172.16.20.5Router(config)#ip route 172.16.50.0 255.255.255.0 172.16.40.7Router(config)#end%SYS-5-CONFIG_I: Configured from console by consoleRouter#copy running-config startup-configBuilding configuration.OKRouter#config tEnter configurat

28、ion commands, one per line. End with CNTL/Z.Router(config)#hostname routeBrouteB(config)#end%SYS-5-CONFIG_I: Configured from console by consolerouteB#1.RouterCRouter Con0 is now availablePress RETURN to get started.Router>enRouter#config tEnter configuration commands, one per line. End with CNTL/

29、Z.Router(config)#interface s0Router(config-if)#ip address 172.16.40.7 255.255.255.0Router(config-if)#no shut%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to up%LINK-3-UPDOWN: Interface Serial0, changed state to upRouter(config-if)#encap pppRouter(config-if)#exitRouter(config

30、)#interface e0Router(config-if)#ip address 172.16.50.7 255.255.255.0Router(config-if)#no shut%LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to up%LINK-3-UPDOWN: Interface Ethernet0, changed state to upRouter(config-if)#end%SYS-5-CONFIG_I: Configured from console by consoleR

31、outer#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#ip route 172.16.10.0 255.255.255.0 172.16.40.6（靜態）Router(config)#ip route 172.16.11.0 255.255.255.0 172.16.40.6Router(config)#ip route 172.16.20.0 255.255.255.0 172.16.40.6Router(config)#end%SYS-5-CONFIG_I: Conf

32、igured from console by consoleRouter#copy running-config startup-configBuilding configuration.OKRouter#show ip routeCodes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA e

33、xternal type 2 E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default U - per-user static route, o - ODRGateway of last resort is not set 172.16.0.0/24 is subnetted, 4 subnetsS 172.16.20.0 1/0 via 172.16.40.6S 172.16.11.

34、0 1/0 via 172.16.40.6C 172.16.40.0 is directly connected, Serial0C 172.16.50.0 is directly connected, Ethernet0Router#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname routeCrouteC(config)#end%SYS-5-CONFIG_I: Configured from console by consolerouteC#配置好的線路：結

35、果：實驗2 使用Boson Netsim和RouterSim模擬了實驗一，同時使用動態配置完成，由于基本和上一實驗過程相同，所以只留下了動態的過程。2.Router2621router2621(config)#router riprouter2621(config-router)#network 172.16.10.0（動態）router2621(config-router)#network 172.16.11.0router2621(config-router)#endrouter2621#copy run startDestination filename startup-config?B

36、uilding configuration.OK2.RouterArouterA(config)#router riprouterA(config-router)#network 172.16.11.0（動態）routerA(config-router)#network 172.16.20.0routerA(config-router)#endrouterA#copy run startDestination filename startup-config?Building configuration.OK2.RouterBrouterB(config)#router riprouterB(c

37、onfig-router)#network 172.16.20.0（動態）routerB(config-router)#network 172.16.40.0routerB(config-router)#endrouterB#copy run startDestination filename startup-config?Building configuration.OK2.RouterCrouterC(config)#router riprouterC(config-router)#network 172.16.40.0（動態）routerC(config-router)#network

38、172.16.50.0routerC(config-router)#endrouterC#copy run startDestination filename startup-config?Building configuration.OK2.Switch1900 CLI session with the switch is open. To end the CLI session, enter Exit.>en#config tEnter configuration commands, one per line. End with CNTL/Z.(config)#hostname sw

39、itch1900switch1900(config)#ip address 172.16.10.3 255.255.255.0switch1900(config)#ip default-gateway 172.16.10.1switch1900(config)#end2.Host1：Boson BOSS 5.0Copyright 1998-2003 Boson Software, Inc.Use the command help to get startedPress Enter to beginC:>winipcfgC:>ping 172.16.50.2Pinging 172.1

40、6.50.2 with 32 bytes of data:Reply from 172.16.50.2: bytes=32 time=60ms TTL=241Reply from 172.16.50.2: bytes=32 time=60ms TTL=241Reply from 172.16.50.2: bytes=32 time=60ms TTL=241Reply from 172.16.50.2: bytes=32 time=60ms TTL=241Reply from 172.16.50.2: bytes=32 time=60ms TTL=241Ping statistics for 1

41、72.16.50.2: Packets: Sent = 5, Received = 5, Lost = 0 (0% loss),Approximate round trip times in milli-seconds: Minimum = 50ms, Maximum = 60ms, Average = 55ms主機配置2.Host2Boson BOSS 5.0Copyright 1998-2003 Boson Software, Inc.Use the command help to get startedPress Enter to beginC:>winipcfgC:>pin

42、g 172.16.10.2Pinging 172.16.10.2 with 32 bytes of data:Reply from 172.16.10.2: bytes=32 time=60ms TTL=241Reply from 172.16.10.2: bytes=32 time=60ms TTL=241Reply from 172.16.10.2: bytes=32 time=60ms TTL=241Reply from 172.16.10.2: bytes=32 time=60ms TTL=241Reply from 172.16.10.2: bytes=32 time=60ms TT

43、L=241Ping statistics for 172.16.10.2: Packets: Sent = 5, Received = 5, Lost = 0 (0% loss),Approximate round trip times in milli-seconds: Minimum = 50ms, Maximum = 60ms, Average = 55ms主機配置：實驗3 模擬考試題，對給出的一個網絡分子網.使用172.16.10.0的網絡分成6個子網，我使用了1111四位來分，16，32，48，64，80，96Router2621Press Enter to StartRouter&

44、gt;Router>enRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname router2621router2621(config)#interface f0/1router2621(config-if)#ip address 172.16.10.20 255.255.255.240router2621(config-if)#no shut%LINK-3-UPDOWN: Interface FastEthernet0/1, changed st

45、ate to uprouter2621(config-if)#exitrouter2621(config)#interface f0/0router2621(config-if)#ip address 172.16.10.36 255.255.255.240router2621(config-if)#no shut%LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to uprouter2621(config-if)#endrouter2621#config tEnter configuration commands, one pe

46、r line. End with CNTL/Z.router2621(config)#router riprouter2621(config-router)#network 172.16.10.16router2621(config-router)#network 172.16.10.32router2621(config-router)#endrouter2621#copy run startDestination filename startup-config?Building configuration.OKRouterAPress Enter to StartRouter>enR

47、outer#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#hostname routerArouterA(config)#interface e0routerA(config-if)#ip address 172.16.10.37 255.255.255.240routerA(config-if)#no shut%LINK-3-UPDOWN: Interface Ethernet0, changed state to uprouterA(config-if)#exitrout

48、erA(config)#interface s0routerA(config-if)#ip address 172.16.10.53 255.255.255.240routerA(config-if)#no shut%LINK-3-UPDOWN: Interface Serial0, changed state to up%LINK-3-UPDOWN: Interface Serial0, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to downrout

49、erA(config-if)#encap ppprouterA(config-if)#end%LINK-3-UPDOWN: Interface Serial0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to uprouterA#config tEnter configuration commands, one per line. End with CNTL/Z.routerA(config)#router riprouterA(config-router)

50、#network 172.16.10.32routerA(config-router)#network 172.16.10.48routerA(config-router)#endrouterA#copy run startDestination filename startup-config?Building configuration.OKRouterBPress Enter to StartRouter>enRouter#config tEnter configuration commands, one per line. End with CNTL/Z.Router(config

51、)#hostname routerBrouterB(config)#interface s0routerB(config-if)#ip address 172.16.10.54 255.255.255.240routerB(config-if)#no shut%LINK-3-UPDOWN: Interface Serial0, changed state to uprouterB(config-if)#encap ppp%LINK-3-UPDOWN: Interface Serial0, changed state to down%LINEPROTO-5-UPDOWN: Line protoc

52、ol on Interface Serial0, changed state to downrouterB(config-if)#clock rate 64000routerB(config-if)#exit%LINK-3-UPDOWN: Interface Serial0, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to uprouterB(config)#interface s1routerB(config-if)#ip address 172.16.1

53、0.70 255.255.255.240routerB(config-if)#no shut%LINK-3-UPDOWN: Interface Serial1, changed state to uprouterB(config-if)#encap ppp%LINK-3-UPDOWN: Interface Serial1, changed state to down%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to downrouterB(config-if)#clock rate 64000rou

54、terB(config-if)#end%LINK-3-UPDOWN: Interface Serial1, changed state to up%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to uprouterB#config tEnter configuration commands, one per line. End with CNTL/Z.routerB(config)#router riprouterB(config-router)#network 172.16.10.48routerB(config-router)#network 172.16.10.64routerB(config-router)#endrouter