【優(yōu)秀畢設】減速機殼加工工藝及夾具設計

1、內容摘要：在生產過程中，使生產對象(原材料，毛坯，零件或總成等)的質和量的狀態(tài)發(fā)生直接變化 的過程叫工藝過程，如毛坯制造，機械加工，熱處理，裝配等都稱之為工藝過程。在制定工 藝過程中，要確定各工序的安裝工位和該工序需要的工步，加工該工序的機車及機床的進給 量，切削深度，主軸轉速和切削速度，該工序的夾具，刀具及量具，還有走刀次數和走刀長 度，最后計算該工序的基本時間，輔助時間和工作地服務時間。關鍵詞：工序，工位，工步，加工余量，定位方案，夾緊力Abstract :Enable producing the target in process of production (raw materials

2、, the blank , state of quality and quantity on part become always ) take place direct course of change ask craft course, if the blank is made, machining, heat treatment , assemble etc.and call it the craft course. In the course of making the craft , is it confirm every erector location and worker st

3、ep that process need this of process to want, the locomotive of processing , this process , and the entering the giving amount of the lathe, cut depth , the rotational speed of the main shaft and speed of cutting, the jig of this process, the cutter and measuring tool, a one hundred sheets of number

4、 of times still leaves and a one hundred sheets of length leaves, calculate basic time of this process , auxiliary time and service time of place of working finally.Keyword:The process, worker one, worker's step , the surplus of processing, orient the scheme , clamp strength目錄摘要Abstract3第一章緒論 ,&

5、quot;Lj jjjjjjjjjjjjjjjjjjjjjjjjjjj第二章零件的工藝分析 ,32.1零件的工藝分析 ,32.2確定毛坯的制造形式 ,32.3箱體零件的工藝性 ,3第三章擬定箱體加工的工藝路線 ,33.1定位基準的選擇 ,33.2加工路線的擬定 ,4第四章加工余量，工序尺寸及毛坯尺寸的確定 ,64.1機蓋 ,64.2機座,1/ '*/1- JJJJJJJJJJJJJJJJJJJJJJJJJJJ74.3機體,1/ U Y JJJJJJJJJJJJJJJJJJJJJJJJJJJ8第五章確定切削用量及基本工時 ,95.1機蓋 ,95.2 機座 ,145.3 機體 ,23夾具設計 ,346.1粗銑下平面夾具 ,346.2粗銑前后端面夾具 ,36參考文獻 ,40結論J J J J J J J J J J J J J J