NPI全過程各階段定義,特性,要點

1、NPI (New Project Implement) Project全過程各階段定義,特性,要點: BCA (Business Case Approval) 階段: 項目立項可行性評審階段項目商務事項認可過程,項目可行性評估,確定是否同意進行立項,確認立項后,項目啟動,召開Kick Off Meeting,組建項目小組.重點: 確認項目是否立項 (規劃層經營層)PD (Product Definition) 階段: 產品詳細定義評審階段產品系統框架確立完成并被評審,項目Development Schedule確立.重點: 項目產品定義是否合理,Development Schedul

2、e確立. PS: 一般情況下,滿多公司不會對BCA和PD階段做太明確的階段區分,一般整合到一個階段,即項目立項可行性評審階段. EVT (Engineering Verification Test) 階段: 工程樣品驗證測試評審階段Identify design problems and solving them as early in the design cycle, verify the design meets pre-determined specifications and design goals. Consists of Basic Functional Tests,

3、 Parametric Measurements, Specification Verification.重點: Ensures basic unit performance to design goals and specifications. PS: 此階段一般要完成如下資料/事項:Product /Engineering SpecificationDesign Verification Test Plan (Basic Test, Compatibility Test, EMI)Test Equipment and ToolingTest Process, Test Guide

4、line and Test ProgramSoftwareCircuit SchematicPCB Layout3D & 2D & Exploded DrawingSurface & Artwork & PackagingPre-BoMCost ReviewFailure Analysis and Corrective ActionsEVT評審會議DVT (Design Verification Test) 階段: 設計樣品驗證測試評審階段Design refinement. Revise and improve the design to meet perfo

5、rmance and design requirements and specifications. Deliver objective, comprehensive testing verify all product specifications, interface standards and diagnostic commands. Consists of Functional Testing (including Usability), Performance Testing, Climatic Testing, Reliability Testing, Compliance Tes

6、ting.重點: 確認是否合符產品定義要求,可否批量生產. PS: 此階段一般要完成如下資料/事項:Design Verification Test Complete (Basic Test, Compatibility Test, EMI)Basic Test包括:a: Function Testb: Safety Test (主要包括: Hit-Pot, 絕緣電阻測試, Current Leakage, 接地測試)c: Environment Testd: Mechanical Test (主要包括: Vibration Test, Drop Test)Compatibility

7、 Test包括:a: 硬件與軟件之兼容性b: 硬件與硬件之兼容性EMI Test: 抗靜電,電磁干擾Safety CertificationDesign Change (according to the design change information, modify all related design files/drawing/software/program.)Modify BoM制程文件試用的制作AVL (Approved Vendor List)Failure Analysis and Corrective ActionsDVT評審會議PVT (Production/Proces

8、s/Pilot Run Verification Test) 階段: 小批量過程/生產驗證測試評審階段Verify design has been correctly implemented into production, consists of Compatibility Verification Testing and Reliability Testing.重點: 能否量產 PS: 此階段一般要完成如下資料/事項:Failure Analysis and Corrective Actions各種制程文件修改并正式發行Engineering Change針對變更(小變更)做相應測試Tooling VerificationApproval Sheet / FileCompatibility Verification TestReliability Test制程能力報告PP Approval MeetingGolden Sample產品資料releaseMVT (Mass Production Verification Test) 階段: 量產驗證