【AS澳大利亞標(biāo)準(zhǔn)】AS 4688-4-2000 Furniture—Fixed height chairs Part 4 Determination of stability— Chairs with tilting or reclining mechanisms when fully recli

accessed by university of south australia on 25 mar 2007as/nzs 4688.4:2000iso 7174-2:1992australian/new zealand standardfurniturefixed height chairspart 4: determination of stability chairs with tilting or reclining mechanisms when fully reclined, and rocking chairsiso title: furniture chairs determination of stability, part 2: chairs with tilting or reclining mechanisms when fully reclined, and rocking chairsaccessed by university of south australia on 25 mar 2007the standard is downloaded from standard sharingas/nzs 4688.4:2000this joint australian/new zealand standard was prepared by joint technical committee cs/88, commercial furniture. it was approved on behalf of the council of standards australia on 14 december 1999 and on behalf of the council of standards new zealand on 15 december 1999. it was published on 15 february 2000.the following interests are represented on committee cs/88:australia postaustralian chamber of commerce and industryaustralian industry groupcommercial furniture industry association of australiaergonomics society of australiafurntech, australianational furnishing industry association of australianew zealand furniture manufacturers federationn.s.w. department of public works and servicesplastics and chemicals industries association, australiatelstra corporationkeeping standards up-to-datestandards are living documents which reflect progress in science, technology and systems. to maintain their currency, all standards are periodically reviewed, and new editions are published. between editions, amendments may be issued. standards may also be withdrawn. it is important that readers assure themselves they are using a current standard, which should include any amendments which may have been published since the standard was purchased.detailed information about joint australian/new zealand standards can be found by visiting the standards australia web site at .au or standards new zealand web site at www.standard.co.nz and looking up the relevant standard in the on-line catalogue.alternatively, both organizations publish an annual printed catalogue with full details of all current standards. for more frequent listings or notification of revisions, amendments and withdrawals, standards australia and standards new zealand offer a number of update options. for information about these services, users should contact their respective national standards organization.we also welcome suggestions for improvement in our standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. please address your comments to the chief executive of either standards australia international or standards new zealand at the address shown on the back cover.this standard was issued in draft form for comment as dr 98422.accessed by university of south australia on 25 mar 2007as/nzs 4688.4:2000australian/new zealand standardfurniturefixed height chairspart 4: determination of stability chairs with tilting or reclining mechanisms when fully reclined, and rocking chairsfirst published as as/nzs 4688.4:2000.copyright standards australia/standards new zealandall rights are reserved. no part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher.jointly published by standards australia international ltd, po box 1055, strathfield, nsw2135 and standards new zealand, private bag 2439, wellington 6020isbn 0 7337 3191 0iiprefacethis standard was prepared by the standards australia/standards new zealand committee cs/88, commercial furniture. the standard is identical with and has been reproduced from, iso 7174-2:1992, furniture chairs determination of stability, part 2: chairs with tilting or reclining mechanisms when fully reclined, and rocking chairs.the objective of this standard is to provide specifiers and manufacturers with a standard for the determination of stability of rocking chairs and chairs with tilting or reclining mechanisms when fully reclined and enables purchasing authorities, retailers and users to use these criteria to assist in selection and evaluation.as this standard is reproduced from an international standard, the following applies:(a)its number appears on the cover and title page while the international standard number appears only on the cover.(b)in the source text, this international standard should read this australian/new zealandstandard.(c)a full point substitutes for a comma when referring to a decimal marker.references to international standards should be replaced by equivalent australian/new zealandstandards, as follows:reference to international standardaustralian/new zealand standardisoas/nzs7174furniture chairs determination of stability7174-1upright chairs and stools4688furniture chairs determination of stability4688.3part 3: upright chairsaccessed by university of south australia on 25 mar 2007the standard is downloaded from standard sharingthis standard is part 4 of a series for testing fixed height chairs. other parts in this series are as follows:part 1:ergonomic and general requirementspart 2:determination of strength and durabilitypart 3:determination of stability upright chairsfor chair types and chairs with pedestal bases not covered by this standard refer to as/nzs 4438,height adjustable swivel chairs and as/nzs 3813, plastic monobloc chairs.iiiaccessed by university of south australia on 25 mar 2007contentspage1scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12normative reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14representation of test person . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15test equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16conditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27general test requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28test procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29test report . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6annex abibliography . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7accessed by university of south australia on 25 mar 2007the standard is downloaded from stan