fs11c14物聯網開發平臺配套v6.0源碼測試ucos實驗

【實驗?zāi)康膗C/OS操作系統在FS_11C14開發板上的移植。學習uC/OS【實驗環境 3、RealViewMDK（Keil【實驗步驟23、通過FS_Colink編譯好的工程到FS_11C14開發板4、按Reset【實驗現象說明將程序到FS_11C14開發板之后，OLED屏沒有顯示數碼管進行計數任務，兩個LED燈在系統時鐘中斷的控制下進行閃爍；【實驗程序說明1voidvoidTask_Key(void{{if((KEY_Read()==KEY_SEL)||{}}OSTimeDlyHMSM(0,0,0,}}導致信號量Key_Sem的改變，系統資源釋放。voidvoidTask_BeepFan(void{{OSSemPend(Key_Sem,0,on_off=if(on_off=={GPIOSetValue(PORT0,2,//GPIOSetValue(PORT1,1,//}{GPIOSetValue(PORT0,2,//GPIOSetValue(PORT1,1,//}}}}1s計數值加一，從而也實現了7段數碼管的周期性的顯示。voidvoidTask_Led(void{uint32_t{GPIOSetValue(PORT3,0,//開GPIOSetValue(PORT3,1,//開//廣播方式發送計數值指針cntOSTimeDlyHMSM(0,0,0,GPIOSetValue(PORT3,0,//關GPIOSetValue(PORT3,1,//關OSTimeDlyHMSM(0,0,0,}}務接收資源并完成7段數碼管的周期顯示。具體實現：voidvoidTask_Seg7Led(void{uint32_t{t=(uint32_t*)OSMboxPend(Led_Mbox,0,}} 該任務周期的進行各個任務對CPU的占用情況以及堆棧的使用情況。我們可以通過串voidvoidTask_Monitor(void{{lu0=OSTimeGet()/OSCPUUsage, %4u-%4u/4, %4u-%4u=%4u", /4, %4u-%4u=%4u",/4,printf("\r\nSeg7Led:%4u-%4u/4, %4u-%4u=%4u",/4,printf("\r\nBeepFan:%4u-%4u/4,printf("