酷派readmeFlashOne工具與其適配的QFIL適用于系統無法啟動

1、FlashOne tool and related QFIL packages are used only for flashing a complete phhichcant boot up, board level and phone with changed components flashing operationis strictly prohibited, or it may cause unpredictable conditions.安裝說明將壓縮包解壓到不含中文，不含空格，不含特殊字符的目錄，雙擊 main.exe 運行刷機工具1.2 adb, fastboot 命令已經預置

2、，不需要安裝，但需要安裝 360助手等以保證可以自動安裝驅動如果用到 qfil 刷機，請先安裝 qfil 驅動，驅動放在 driver 目錄下，安裝時請先斷開網絡，安裝完畢后請重啟電腦刷機過程中不要斷開連接線多次刷機的時候會提示“解壓縮文件夾已經存在，是否需要重新解壓縮？”， 選否不用再次解壓縮，直接升級刷 userdata 選項，用戶選“是”會丟數據，選“否”不丟數據，但是可能升級不徹底，建議刷機前備份數據升級包會解壓到刷機工具包中，因為刷機包比較大，請保證磁盤空間足夠1.8 請將的/硬件兼容性表格放到刷機工具所在文件夾下主要功能介紹系統更新當電腦連網情況下，刷機工具啟動時會檢測服務器上是否

3、有彈出更新提示框版本，如果有新版本會兼容性表格2.2在菜單中有GetHSCT 菜單項，點擊此菜單，會直接的兼容性表格，同時會將本地的 hsct 表格備份到 HSCTBackup 文件夾下，備份文件的后綴為當時的時間點。如果因為網絡問題或者其他原因文件拷貝回來。失敗，會彈出失敗的提示框，同時會把原來的如果的文件格式不正確，也會彈出提示框，同時把原來可用的文件拷貝回來。2.3 fastboot 刷機刷機方式默認為 fastboot，同時按住電源鍵和音量減使進入 fastboot 模式，然后連上數據線，等驅動安裝完畢后，點擊刷新設備，將顯示設備序列號和設備類型，如果設備沒有刷過 deviceInfo

4、 分區，將不顯示設備類型，此時想要正常刷機可以選擇強制刷機按鈕，這樣工具將不會校驗硬件和版本是否匹配，需要自己判斷選擇對應的刷機包（zip 包），zip 包不要放在中文路徑下選擇是否刷 userdata點擊開始刷機，如果本地有該刷機包的解壓包，將提示是否需要重新解壓，如果選擇是，將重新解壓文件，等文件解壓完畢后將自動刷機，進度條將顯示刷機進度，同時會顯示刷機的 logFlashOne 工具與其適配的 QFIL適用于系統無法啟動的整機狀態下的救回，嚴禁用于器件更換階段的板級刷機操作，后者可能會出現無法預知的異常！刷機完成或者出現錯誤時都會有提示框彈出如果刷機失敗并提示“unlock fastbo

5、ot 刷機，方法：設置-關于”2.4 qfil 刷機operation is not allowed”，請先手動OEM 再進行-連續點擊“版本號”打開“開發者選項”-選擇“OEM刷機方式選擇 qfil 后，同時按電源鍵，音量增減鍵使進入 qfil 模式，然后連上數據線，等驅動安裝完畢，點擊刷新設備將顯示所有的 qfil 可用串，選擇相應的串，注意不要連接其他高通設備，否則會影響刷機選擇對應的刷機包（zip 包），zip 包不要放在中文路徑下(請自己確認刷機包，qfile 模式下工具無法判斷刷機包與是否匹配)點擊開始刷機，如果本地有該刷機包的解壓包，將提示是否需要重新解壓，如果選擇是，將重新解壓

6、文件，等文件解壓完畢后將自動刷機，進度條將顯示刷機進度，同時會顯示刷機的 log刷機完成或者出現錯誤時都會有提示框彈出2.5 mtk 刷機刷機方式選擇 mtk 后，選擇對應的刷機包（zip 包），zip 包不要放在中文路徑下(請自己確認刷機包，mtk 模式下無法判斷刷機包與是否匹配)點擊開始刷機，如果本地有該刷機包的解壓包，將提示是否需要重新解壓，如果選擇是，將重新解壓文件，等文件解壓完畢后將自動開始刷機，此時會彈出“請在一分鐘內插入設備”的提示框，此時需要在一分鐘內按音量加同時插 USB 線，然后將自動開始刷機，同時進度條顯示刷機進度，log 也將顯示在界面上。刷機完成或者刷機出現錯誤時都會

7、彈出提示框2.6 獲取信息處于正常待機狀態，確保USB debugging 開啟并且 adb devi能獲得設備。點擊 Device Info 欄“ 刷新” 按鈕將獲取的 IMEI/M/Manufacturroduct/Platform Ver信息顯示（獲取不到的信息 UI 會顯示空Name/Marketing Name/SW Ver白）。點擊“清除”按鈕將清空各項信息。點擊“導出”按鈕將導出各項信息到文件，并彈出提示框提示文件保存位置。2.7 顯示刷機包信息Fastboot/Qfil/MTK 刷機過程中，在Software Info 欄顯示刷機包的Software Variant/Produ

8、ct/Software Ver信息MInstallUnzip the zip file to the directory not include Chi space, and double click main.exe to run flash tool.or spel character and bl1.2. adb, fastbootds are preset, dont need to install, but need install phoneassistant, so make sure phone driver can be installed automatically.1.3

9、. When flash with qfil type, you need to install qfil driver, the driver is under driverfolder, please disconnect network when install the driver, and restart the pc after installcompleted.1.4. Please dont disconnect the USB cable during flashing.1.5. When flash with same flash file, tips presfolder

10、 already existed,press or not?, select no, will notpress and flash directly.1.6. If choose flash userdata, all user data will be lost, else not, but flash maybeso suggest to backup data before flashing.pley,1.7. Flash zip file willenough space.pressedo flash tool folder, so please make sure there is

11、1.8Please put the latest HW/SW compatibility fileo the folder of flash tool.Main FunctionSystem UpdateIf the network is connected, when flash tool start, it will check if there is new verserver, if yes, pop up update dialog.on2.2 Download HSCT FileThere is GetHSCTonbar, press this, will download HSC

12、T file directly, andbackup the local hsct file to HSCTBackup folder, the suffix of the backup file is the time when youback up the file.If the file download failed with network or other ie, there will be a download faileddialog pop up, and copy the fiack from HSCTBackup folder.If the format of the d

13、ownloaded file is not correct, there will be also a dialog pop up, andcopy the fiack from HSCTBackup folder also.2.3 Fastboot FlashThe default flash type is fastboot, when select fastboot flash type, presser key andvolume down key at the same time, then phill entero fastboot mode. Connect with USBca

14、ble, wait for install driver automatically, then press Refresh button, serial No. and device typewill show on UI, maybe some phones cant display device type,ts because these phones. But before upgrade, youdidnt flash devinfo part, these phones need to upgrade tvercan select Force Flash to flash the

15、phone,hardware is matching yourself.his situation, you should check if the software andSelect corresponding flash zip file, the path of zip file should not contain Chicharacter.Select Flash Userdata or notand spelPress Flash button, then start to unzip flash zip file to current folder, but if there

16、is already acorresponding unzip file existing, dialog will pop up, if select yes, willpresfolder already existed,press or not?press, else not. After unzip finished, start to flashthe phone automatically, and the progress bar display flashing progress, and at the same time,the flashing log will also

17、be shown on UI.After flash complete or error happened, a notification dialog will pop up.If fastboot flash failed and notify “unlock operation is not allowed”, please unlock OEM manually and then restart fastboot flash. Unlock steps: Settings-About phone-tap “Build” continuously then open “Developer

18、 options”-enable “OEM unlocking”.2.4 qfil FlashWhen select qfil flash type, presser key, volume up and volume down key at the sametime, then the phone entero qfil mode, connect USB cable with PC, wait for PC install driverautomatically, then press Refresh button on the tool, serial port will display

19、 on UI, select theport you want to flash, and make sure there is no other qcom device connected.Select corresponding flash zip file, the path of zip file should not contain Chiand spelcharacter. (Under qfil mode, the tool cant get hardware information, you should check if thesoftware and hardware is

20、 matching yourself.)Press Flash button, then start to unzip flash zip file to current folder, but if there is already acorresponding unzip file existing, will pop up, if select yes, willpresfolder is exist,press or not? dialogpress, else not. After unzip finished, start to flash thephone automatical

21、ly, and the progress bar display flashing progress, and at the same time, theflashing log will also be shown on UI.After flash complete or error happened, a notification dialog will pop up.2.5 mtk FlashWhen select mtk flash type, select corresponding flash zip file, the path of zip file should notco

22、ntain Chiand spel character. (Under mtk mode, the tool cant gerdware information,you should check if the software and hardware is matching yourself.)Press Flash button, then start to unzip flash zip file to current folder, but if there is already acorresponding unzip file existing, will pop up, if s

23、elect yes, will phone automatically.presfolder is exist,press or not? dialogpress, else not. After unzip finished, start to flash theWhen pop up Please connect with device in one minute! dialog, press volume up key and atthe same time connect with USB cable, then start to flash the phone automatically, and the progress bar display flashing progress