傳感器進廠檢驗規(guī)程

1、Drafted by: Zhang Lihui Date: DATE yyyy-MM-dd 2012-08-31 The inspection for weighing sensor of Liebherr Concrete Machinery (Xuzhou) Co., Ltd. Author: Contact: HYPERLINK mailto:lihui.zhang lihui.zhangMr. Lihui Zhang Version 1.00 Last Modified: Implementation: Approved by: Mr. Li Zixiang Validity: CLX

2、/XLC Source: Operation Planning Dept.Total Pages: The inspection for weighing sensor purpose:This procedure prescribe the inspection for appearance, logos, packaging and storage of weighing sensor. Appearance inspection The appearance of the sensor by visual inspection, the sensor bearing surface ma

3、y not have scratches and rust spots, shell and parts surface coating and nameplate are intact, no apparent injuries, the text of all signs and symbols should be clear and securely. logo, packaging and storagelogo Sensor should be nameplate, must be marked on the nameplate:a. name of manufacturer or

4、factory mark;b. the product name and model;c. measurement range;d. accuracy levels;e. Product ID;f. the date of manufacture.3.2 packaging The sensor packaging should be consistent with ZBY 003 (instrumentation packaging and transportation technical conditions).storage The sensor should be stored at

5、a temperature of -25 to +60 C and relative humidity less than 90% of the ventilation room, indoor air shall not contain corrosive gas.稱重傳感器進廠檢驗規(guī)程Document No.： 目的本規(guī)程規(guī)定了工程機械攪拌設備所用稱重傳感器的外觀、標志、包裝和貯存的檢驗。 外觀檢驗傳感器的外觀用目檢法進行，傳感器的受力面不得有劃痕和銹點，外殼和零部件表面的涂覆層和銘牌均完好，無明顯傷痕，所有標志的文字和符號應清晰、完整并牢固。3. 標志、包裝和貯存3.1 標志 傳感器應有銘牌，銘牌上標明：制造廠或廠標；產品名稱和型號；測量范圍；精確度等級；產品編號；制造年月。3.2 包裝 傳感器的包裝應符合