51單片機流水燈--程序

1、精選優質文檔-傾情為你奉上精選優質文檔-傾情為你奉上專心-專注-專業專心-專注-專業精選優質文檔-傾情為你奉上專心-專注-專業1.第一個發光管以間隔200ms閃爍。2.8個發光管由上至下間隔1s流動，其中每個管亮500ms,滅500ms。3.8個發光管來回流動，第個管亮100ms。4.用8個發光管演示出8位二進制數累加過程。5.8個發光管間隔200ms由上至下，再由下至上，再重復一次，然后全部熄滅再以300ms間隔全部閃爍5次。重復此過程。6.間隔300ms第一次一個管亮流動一次，第二次兩個管亮流動，依次到8個管亮，然后重復整個過程。7.間隔300ms先奇數亮再偶數亮，循環三次；一個燈上下循環

2、三次；兩個分別從兩邊往中間流動三次；再?gòu)闹虚g往兩邊流動三次；8個全部閃爍3次；關閉發光管，程序停止。1#include #define uint unsigned int sbit led1=P10; void delay(); void main() while(1) led1=0; delay(); led1=1;delay(); void delay() uint x,y;for(x=200;x0;x-)for(y=100;y0;y-);2#include#include#define uint unsigned int#define uchar unsigned charsbit p1

3、=P10;uchar a;void delay();void main() a=0 xfe; P1=a; while(1) a=_crol_(a,1); delay(); P1=a; delay(); void delay() uint b; for(b=55000;b0;b-);3#include #include #define uint unsigned int #define uchar unsigned char void delay() uint x,y;for(x=100;x0;x-)for(y=110;y0;y-);void main() uchar a,i;while(1)

4、a=0 xfe; for(i=0;i8;i+) P1=a; delay(100); a=_crol_(a,1); a=0 x7f;for(i=0;i8;i+) P1=a; delay(100); a=_cror_(a,1);4#include #include #define uint unsigned int #define uchar unsigned char void delay(uint a) uint x,y;for(x=a;x0;x-)for(y=110;y0;y-);void main() uchar b;while(1) b+;P1=b;delay(200);5#includ

5、e #include #define uint unsigned int #define uchar unsigned char void main() uchar a,i,j;while(1) for(j=0;j2;j+)a=0 xfe; for(i=0;i8;i+) P1=a; delay(200); a=_crol_(a,1); a=0 x7f;for(i=0;i8;i+) P1=a; delay(200); a=_cror_(a,1); P1=0 xff;for(j=0;j0;x-)for(y=110;y0;y-);6#include #include #define uint uns

6、igned int #define uchar unsigned char void delay() uint x,y;for(x=300;x0;x-)for(y=110;y0;y-);void main() uchar a,i,j;while(1) a=0 xfe; for(j=0;j8;j+)for(i=0;i8-j;i+) P1=a; delay(200); a=_crol_(a,1); a=_crol_(a,j); P1=0 xff; a=a1;7 #include #include #define uint unsigned int #define uchar unsigned ch

7、ar void delay(uint z) uint x,y;for(x=z;x0;x-)for(y=110;y0;y-);void main() uchar a,i,j;for(j=0;j3;j+) P1=0 x55; delay(300); P1=0 xaa;delay(300); for(j=0;j3;j+) a=0 xfe;for(i=0;i8;i+)P1=a; delay(300); a=_crol_(a,1);P1=0 xff;for(j=0;j3;j+) P1=0 x7e; delay(300); P1=0 xbd;delay(300); P1=0 xdb; delay(300); P1=0 xe7;delay(300); P1=0 xff;for(j=0;j3;j+) P1=0 xe7; delay(300); P1=0 xdb;d