2022年FURUNO電子海圖完整題庫(kù)

1、1.What does the alert number 820 indicate?A. AIS lostB. TT lostC. Navtex message receivedD. Cross track alarm2. What does the alert number 450 indicate?A. Route: Illegal To WPTB. RADAR comm. Error C. LAN adapter version error D. Heading sensor not available3. What does the alert number 495 indicate?

2、 A. Anchor watch errorB. Track control stopped C. Steering parameter error D. Filter: Init. 4. What does the alert number 380 indicate? A. Route: File read errorB. User chart: File not foundC. AIS COM errorD. User chart: File read error5. What does the alert number 635 indicate? A. No official data

3、B. Log error C. Dual axis log (WT) errorD. Dual axis log (BT) error6. What does the alert number 640 indicate?A. Datum mismatch B. Chart align: Over 30 min.C. RADAR antenna ID errorD. Gyro error (Trackpilot)7. What does the alert number 031 indicate?A. Sensor adapter 1 COM timeoutB. Sensor adapter 2

4、 COM timeoutC. Sensor adapter 3 COM timeoutD. Sensor adapter 4 COM timeout 8. What does the alert number 257 indicate?A. Heading sensor not availableB. Prg track: Need higher speedC. Prg track: Use radius CtrlD. Gyro 3 COM error9. What does the alert number 470 indicate? A. WGS 84 not usedB. Differe

5、nt geodetic datumC. Sentence syntax errorD. Datum change10. Where do you control the settings and visibility of the chart layers?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Basic Setting 11. Where do you set the Safety Depth?A. In Chart Legend B. In Symbol DisplayC. In Chart Alert

6、D. In Chart Display12. Where do you set the Shallow Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display13.Where do you set the Deep Contour?A. In Chart LegendB. In Symbol DisplayC. In Chart AlertD. In Chart Display14.Where do you set the Safety Contour?A. In Chart Lege

7、ndB. In Symbol DisplayC. In Chart AlertD. In Chart Display15. Where do you set the Shallow Pattern?A. In Chart DisplayB. In Symbol DisplayC. In Basic SettingD. In Chart Catalogue16. Where do you control the AIO?A. In Chart LegendB. In Symbol DisplayC. In Chart DisplayD. In Chart Catalogue17.Where do

8、 you select the color Palette used to display the charts?A. In Chart LegendB. In Chart DisplayC. In Quick Access BarD. In Chart Catalogue18. Where do you switch between Multicolor and Two Color settings for the charts?A. In Chart LegendB. In Symbol DisplayC. In Basic SettingD. In Chart Display19. Wh

9、en an ENC is outlined in Green in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. License is not available or has expired.20. When an ENC is outlined in Orange in the Chart Catalog

10、ue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.21. When an ENC is outlined in Magenta in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is vali

11、d - chart is NOT up-to-dateC. License is available - chart not installedD. License is valid - up-to-date status doubtful.22. When an ENC is outlined in Yellow in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is v

12、alid - up-to-date status doubtful.D. License is not available or has expired.23. When an ENC is outlined in Red in the Chart Catalogue - it means?A. License is valid - chart is NOT up-to-date.B. License is available - chart not installed.C. License is valid - up-to-date status doubtful.D. License is

13、 not available or has expired24. When an ENC is outlined in Blue in the Chart Catalogue - it means?A. License is valid - chart is up-to-date.B. License is valid - chart is NOT up-to-date.C. License is available - chart not installed.D. Cancelled chart.25. Where can you find information concerning th

14、e charts stored on the HDD?A. On the Internet.B. The Chief Officer will know.C. In the chart catalogue.D. In the Chart Display menu.26. How can you tell if your FURUNO ECDIS is displaying an ENC?A. There is an ENC Data available indication in the Own Ship Functions Box.B. There is an RNC data indica

15、tion in the Own Ship Functions Box.C. The FURUNO ECDIS will give an audible alarm if I am not viewing an ENC.D. There is no special indication in the Own Ship Functions Box.27. Where do you find information on Magnetic Variation in the ENCs on the FURUNO ECDIS?A. In Chart DisplayB In Chart Catalogue

16、C In Chart AlertD In Chart Legend28. Which information can you find in the Vector Chart Legend?A Magnetic VariationB Base CD numberC Permit expiration dateD Safety Contour setting29. Which information can you find in the Vector Chart Legend?A T&P NoticesB NameC WarningsD Safety Contour setting30. Wh

17、ich information can you find in the Vector Chart Legend?A Notices To MarinersB Presentation Library edition numberC Chart edition & Update dateD Safety Contour setting31. Which information can you find in the Raster Chart Legend?A Magnetic VariationB Safety Contour settingC Quality of dataD T&P Noti

18、ce32.Which information can you find in the Raster Chart Legend?A Horizontal datumB Safety DepthC User Permit numberD License number33. Which information can you find in the Raster Chart Legend?A Shallow ContourB Chart NameC Chart Viewing dateD Deep Contour34. Which information can you find in the Ra

19、ster Chart Legend?A Edition numberB Last displayed updateC Edition dateD Update issue date35. How do you switch from Vector chart to Raster chart on the FURUNO ECDIS?A I select Raster chart in the Main menu.B I select RNC in the Chart Legend.C I select Raster chart from the drop down list in the Sta

20、tus Bar.D I select RNC in the Chart Catalogue.36. How do you switch from Raster chart to Vector chart on the FURUNO ECDIS?A I select ENC in the Main menu.B I select Vector chart in the Chart Legend.C I select Vector chart from the drop down list in the Status Bar.D I select Vector chart in the Chart

21、 Catalogue.37.How do you get information on an ENC object (Buoy - Beacon - Berth etc.) on the FURUNO ECDIS?A I right click on the User Chart function in the route planning tool.B I click on the Chart Info in the Instant Access Bar.C I center click on the object.D I right click on the object.38 How d

22、o you record Own Ships position on the ECDIS charts when you have a Range/Bearing observation from your RADAR?A I cannot record own ships position manually on the FURUNO ECDIS.B I record LOP in the Record function of the Event Log.C I press the CTRL & ACQ/ACT button on the Control Unit.D I select Re

23、cordEvent Log and User Event from the Instant Access bar and insert the observation in the Record User Event window.b39 Which operation can you perform on the FURUNO ECDIS?A I can record target ships positions in the Voyage log automatically.B I can record a position fix manually by using just one d

24、istance and one bearing.C I can playback my past voyage track on the charts.D I can send my Route Plan and User Chart and Notes to a FURUNO GPS for display on the GPS.40 Which operation can you perform on the FURUNO ECDIS?A I can record my position manually on the ENCs.B I can set the ECDIS to autom

25、atically choosing a Safety Contour based on my setting of Ships maximum draft.C I can set Ships maximum height to enable chart alerts from areas in the charts where there is not sufficient air draft.D I can send a copy of my Route Plan to an AIS target as a Safety Message.41 Which operation can you

26、perform on the FURUNO ECDIS?A I can play back my ships past track on the ECDIS.B I can record my position manually on the RNCs.C I can create Notes from my Voyage Log to document a voyage on the charts.D I can set the ECDIS to include engine log information into the Voyage log automatically.b142 How

27、 do you document your previous voyage on the FURUNO ECDIS?A I use my paper Logbook as documentation.B I use my paper Logbook and my VDR or SVDR as documentation.C I use the tracking function in the symbol display.D I show a playback of my past voyage track on the charts.43 Which operation can you pe

28、rform during a voyage?A I can use the Event function to record special events in the Event Log.B I can create a User Chart from the Alert Log and save it to a USB memory device.C I can create a User Chart from the Chart Usage Log and save it to a USB memory device.D I can create a User Chart from th

29、e Voyage Log and save it to a USB memory device.44 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Event function to record special events in the Details Log.B I can view and print a copy of the Voyage Log.C I can create a backup copy of Own Ships past

30、 track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.D I can reset the Chart Usage Log after creating a backup copy.45 Which operation can you perform during a voyage or after completion of a voyage?A I can use the Record function to record speci

31、al events in the Voyage Log.B I can create and save a screen shot for future reference.C I can view and print a copy of the Details Log.D I can connect the ECDIS to the Internet and upload all documentation to an external storage.46 Which operation can you perform after completion of a voyage?A I ca

32、n add additional records of manual positions to the Voyage Log adding further detail to the past Voyage.B I can create a User Chart from the monitored Route Plan and save it to a USB memory device.C I can create a backup copy of the Voyage log on a USB memory device.D I can view and print a copy of

33、the Chart Usage Log.47 Which recording function is available in the FURUNO ECDIS?A Danger Targets LogB Engine LogC Speed LogD GPS Log48 Which recording function is available in the FURUNO ECDIS?A AIS LogB Engine LogC Voyage LogD RADAR Log49 Which recording function is available in the FURUNO ECDIS?A

34、 Gyro LogB Engine LogC Ships LogD Details Log50 How do you manually record Own Ships current position in the Logs?A By opening the Voyage Log and entering the current position.B By right clicking on own ship icon on the user interface.C By pressing the Record button on the Control Unit.D By using th

35、e record position event function of the Event Log.51 What is a Manual Update?A A Manual update is an update applied using the Manual function in Load & Update Charts.B A Manual update is an update to the charts created by the operator from information received from the Pilot - a Navtex message - a V

36、HF broadcast etc.C A Manual update is an update applied to the charts by an official representative of the chart producer.D A Manual update is a chart created using the digitizer function of the FURUNO ECDIS.52 How do you delete a specific object added using the Manual Update function?A I select Cle

37、ar in the Manual Update window.B I use the Delete function in the File Export tool.C I right click on the object and use the Manual Update window to delete it.D I set the View Until date for the Manual Update two months back in time.53 How do you modify an existing Manual Update object?A I use the E

38、NC tab of the Chart Maintenance function.B I use the Mariner tab of the Symbol Display function.C I cannot modify a Manual Update - only delete it.D I use the List tab of Manual Update tool function.54 How can you see if a chart object is created using Manual Updates?A The Manual Update will be larg

39、er than any other chart objects.B It is always shown in red.C It will have a special orange marker.D There is no way I can see if a chart object is created using Manual Updates.55 Which color scheme is used for a Manual update on the Furuno ECDIS?A Blue ENC symbolsB Standard ENC symbolsC Orange ENC

40、symbolsD Red ENC symbols56 Where can Manual Updates be displayed?A Only on ENCsB Only on RNCsC Only on Vector chartsD On all types of charts in the ECDIS57 Where can you find a list of the Manual Updates that have been applied to the Furuno ECDIS?A In the Chart LegendB In the Manual Update WindowC I

41、n the Chart CatalogueD In the Chart Display menu58 How do you hide (not delete) a Manual Update object?A I select Clear from the Manual Updates menu.B I select Undo Last from the Manual Updates menu.C I deselect that general type of chart object in the Chart Display dialogue.D I deselect the option

42、from the Symbol Display dialogue.59 Which Manual Update objects can be hidden from view by operator selection?A Only the Manual Updates Special Areas (from the Chart Display dialogue)B All manual Updates objects(from the Chart Display dialogue)C Only the Manual Updates Buoys (from the Chart Display

43、dialogue)D Only the Manual Updates Soundings (from the Chart Display dialogue)60 Can you create a Manual Update from an AIS Safety Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or

44、 letting the ECDIS create it automatically.D No61 Can you create a Manual Update from a Navtex Message shown on the ECDIS?A Yes - by manually creating the object.B Yes - by letting the ECDIS create the object automatically.C Yes - either by creating it manually or letting the ECDIS create it automat

45、ically.D No62 Where do you change the visibility of your Monitored route?A In Chart LegendB In Symbol DisplayC In Chart DisplayD In Chart Catalogue63 Where can you update the ENCs?A In the Chart Manager (Individual Update)B In the Update function of the Chart DisplayC In the Update function of the S

46、ystem SettingsD In the Update function of the Chart Legend64 Where can you update the RNCs on the Furuno ECDIS?A In the Update function of the MenuB In the Chart Manager (Individual Update)C In the Update function of the Chart CatalogueD In the Update function of the Chart Legend65 How do you update

47、 your vector charts on the Furuno ECDIS using the ENC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I create a User Chart.D I import the information using the Chart Details function in the Chart Catalogue.66 How are regular T&Ps updated on the EC

48、DIS?A T&Ps must always be created as Manual Updates.B I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.C Most T&Ps are included in the weekly update CD and these are updated automatically together with the other updates on the CD.

49、D I cannot update T&Ps on the FURUNO ECDIS.67 How do you update your raster charts on the Furuno ECDIS using the RNC Update CD?A I use the AutoLoad function.B I create a Manual Update from the information on the CD.C I cannot update the raster charts using an RNC update CD.D I import the information

50、 using the Chart Details function in the Chart Catalogue.68 How are loaded ENCs converted into SENCs when updating?A The FURUNO ECDIS will normally convert the ENCs to SENCs automatically.B I must use the conversion tool from the Menu.C I cannot convert ENCs into SENCs.D I load the new Permit file u

51、sing the file named ENC.PMT and then I use the S52 Presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.69 What is the recommended loading sequence when you receive new charts - updates and permits?A There is no recommended sequence.B #1:Base CDs #2:Update CD #3

52、:PermitC #1:Permit #2:Update CD #3:Base CDsD #1:Permit #2:Base CDs #3:Update CD70 How do you select which User Chart to monitor?A By linking it to the monitored Route Plan in the route planning tool.B By clicking Display - User Chart in the Quick Access Bar.D By left clicking on the chart area.71 Wh

53、ere can you enter informative notes on Pilot data (VHF channels etc.) to be used during monitoring in the FURUNO ECDIS?A In the Voyage LogB In the Pilot DataC In the User Event functionD In the User Chart72 How do you enter informative notes in the User Chart?A I select Note as an option for the Are

54、a Line or Circle where the information should be displayed.B I select Note as an option for the Tidal Label or Clearing Line where the information should be displayed.C I select User Chart from the Main menu and then I select Plan and enter the note to be displayed.D I left click on Route in the Qui

55、ck Access Bar and then I select Monitor.73 How do you change the User Chart being used for monitoring?A I move the monitored route plan to planning mode and edit the Linked User Chart setting.B I select a different user chart from the Menu to monitor.C I select User Chart from the Planning sidebar a

56、nd then I select Monitor for the desired user chart.D I left click on User Chart in the Status Bar and then I select Plan.74 Can you move your User Chart from one FURUNO ECDIS to another?A NoB Yes but only by using the harmonization process.C Yes by using the Export/Import tool in the Settings funct

57、ion of the Status Bar.D Yes but only to an ECDIS with the exact same software version number.75 Which printing option is available for the User Chart?A Tidal ReportB Full reportC System reportD Detailed report76 Which printing option is available for the User Chart?A Full reportB Line ReportC System reportD Detailed re