下載本文檔
版權說明:本文檔由用戶提供并上傳,收益歸屬內容提供方,若內容存在侵權,請進行舉報或認領
文檔簡介
1、電氣安裝施工合同Electrical in stallati on con structi on con tract甲方:Party A:乙方:Party B:雙方同意按下列條款簽訂合同:Party A and Party B agreed to sig n a con tract accordi ng to the follow ing terms and con diti ons1. 工程概況:噴漆處理線配套供電設備Project profile: Spray paint process ing line matchi ngpower supply unit 工程名稱:Project na
2、me: project工程地點:Project locati on:工程開工日期:Project Comme nceme nt Date:工程竣工日期:Project Ccompleti on Date:2. 合同內容:該項目安裝設備包括:3臺高壓柜,1臺1600kVA變壓器,8臺低壓開關 柜,計量用互感器和計量裝置。乙方負責該項目所有設備、電纜、橋架和計量裝置 等的電力部分的安裝施工和檢驗工作。施工完成后,乙方負責本項目所有電力公司 的相關報驗、通電申請、安裝驗收、試驗和最后通電工作。本項目為全套的交鑰匙 工程。本合同價格含以上全部費用(除電力部門指定由業主自己交費項目外)The conte
3、nt of con tract:The project equipme nt in stallati on in cludi ng 3 set of high-voltage switch cabinet,one 1600 kva transformer, 8 sets of low-voltage switch cabinet,mutual in ductor used meteri ng and meteri ng device . Party b is resp on sible for in stallatio n and inspection of power part of all
4、 equipment, electric cable, bridge and metering device etc.about this project. Party B is responsible for all inspection electricity application、installation accepta nee test and the fin ally electricity work related to electric power compa ny about this project.this project is full set of tur nkey
5、project. This con tract price and above all charges.(In addition to the electric power department designated by the owner their own to pay.)3. 合同款:美元Project Funds: USD ( Sayonly)4. 承包方式:合同簽訂后,預付款收到后 50天完成全部安裝工作,55天時辦理完項目 驗收工作。預付款收到后60-65天時保證正常通電。Contracting type: After the contract signed, after the
6、 advance payment is received Party B will finish all the installed work in 50 days and have acceptance work of project transacted in 55 days. Party B make sure that all the equipment will be normally electrified in 60-65 days when the advance payment is received.5. 付款條件 ( Conditions of Payment ) :1.
7、 合同簽訂后,預付 50%即元人民幣 。After the con tract sig ned, prepay 50% of Project Funds which is ¥( RMB).2. 項目通電驗收后預付 40%即元人民幣 。After electrified acceptance work of project finished prepay 40% of Project Funds which is ¥( RMB ) .3. 通電驗收后 6個月時付清剩余 10%即元人民幣 。Pay off the surplus 10% ofProject Funds when
8、 electrified acceptance have finished 6 months which is ¥( RMB ).6. 甲方責任( Responsibility of TheBuyer ):1. 甲方全面負責安裝施工現場的管理工作。Party A is broadly responsible for the management of the installed construction site.2. 開工前 3天,甲方應為乙方入場施工創造條件,騰空?qǐng)龅亍⒔油ㄊ┕に?;水電免費 提供給乙方。In the three days before Project Comme
9、ncement Da、teParty A should Creat the conditions for Party B to entrance for construction、empty space、get water and electricity through which are Party A free offer.3. 開工前 10天,甲方應為乙方提供已確定的設計方案圖及安裝施工清單,審查乙方的分 項工程施工方案,確定工程范圍。In the ten days before Project Commencement Da,te Party A should provide the
10、identified design diagram and installed construction listing.4. 甲方中途終止工程,應向乙方償付合同款的50%的違約金。Party A shall pay 50% of Project Total Value for Party B If Party A terminate the project midway.5. 按合同規定支付乙方工程款項。Party A pay project funds for Party B in accordance with the provisions of this contract.7. 乙方責
11、任 :Responsibility of Party B1. 所供產品安裝工程完全符合國家和天津電力公司相關規定,所有工作都以符合相關標 準為原則,不符合項,主管部門提出后乙方得免費改造,直至驗收合格為止。The installed project of production,which is Party B provide,entirely conform to the provisions of the relative stipulation of the country and tianjin electric power company.2. 乙方保證進場相關施工人員的安全,并負責提
12、供必要安全教育和安全保護措施,并對 危險工作和作業人員提供必要的保險措施和有償補償保障。所有乙方人員如果有安全事 故或人員傷害甚至傷亡事故,由乙方負全責,與甲方無關。Party B guarantees safety of entry relative construction worker,s and is responsible for providing necessary safety education and safety protection measures. And provide necessary security measures and paid compe nsat
13、i ng in sura nc eParty B will take en tirely resp on sibility If any security accidents or personal injuries even injuries and deaths happen to Party'sB workers ,and has nothing to do with Party A.3. 乙方保證所有使用材料、電纜、橋架、型材等都是滿足國家標準規定的合格達標產品, 不合格的,甲方有權要求乙方無條件更換。Party B make sure that all used materi
14、als are qualified products which meet the national standard stipulation .if production not qualified, Party A shall be entitled to request Party B offer unconditional replacement.4. 乙方保證做到文明施工,所有進場人員需經過安全施工教育,服從甲方和乙方相關領 導管理,不做違規違紀事情。Party B make sure that working must civilized and all entry workers
15、 need to be safety construction educated ,workers must obey Party A and Party B's relative management.8. 工期延誤 (project delay) : 對以下的原因造成竣工日期的延誤,經甲方代表確認,工期相應順延。Completion date corresponding prolong for the following reasons makes completion date delayed,confirmed by Tarty A.1. 增加工作內容Add project c
16、ontent2. 不可抗力Force Majeure3. 甲方未按合同約定時間提供符合要求的圖紙,或修改范圍不能及時提供。Party A do not provide satisfactory drawing according to the contract time.4. 合同中約定或甲方代表同意給予順延的其他情況。Promise in contract or other conditions which Party A agree to prolong completion date.9. 不可抗力( Force Majeure ): 由于發生人力不可抗拒的原因,致使本合約不能履行,甲方
17、概不負責。不可抗力是指本 協議的不可抗力系指不可干預、不能避免且不能克服的客觀情況。Party B shall be exempted from any liability for failure of executing this Agreement or a portion of the goods under this Agreement in consequence of any Force Majeure incidents which might occur. Force Majeure as referred to in this Agreement means unforese
18、eable, unavoidable and insurmountable objective conditions.10. 仲裁 (Arbitration ): 凡因本合同引起的或與本合同有關的任何爭議,均應提交中國國際經濟貿易仲裁委員會 天津分會,按照申請仲裁時該會現行有效的仲裁規則進行仲裁。仲裁裁決是終局的,對 雙方均有約束力。仲裁不成功時, 可向甲方所在地的人民法院提出訴訟, 進行司法解決。Any dispute arising from or in connection with this Agreement shall be submitted to Tianjin Branch
19、of China International Economic and Trade Arbitration Commission for arbitration , and shall be conducted in accordance with the Commission's arbitration rules in effect at ttime of applying for arbitration. The arbitral awards is final and binding upon both parties. Arbitration is not successfu
20、l,can file a suit with the location of Party A people's court, judicial soluti on.11. 通知(Notification ):所有通知用中英文寫成,并按照合同中地址用傳真或快件或電子郵件方式送達給對方。如果地址有變更,一方應在變更后2日內書面通知另一方。All notification and other information in China and English Ianguages, shall be sent by fax or express mail or e-mail to each other in accorda nee with the address specified in this con tract. If any cha nges of the addresses occupied, a party shall, with in 2 days, in formed other party.12. 適用法律(Governing Law):本合同的所有方面將受中華人民共和國法律和蒙古國法律的約束,并按其進行解釋。All
溫馨提示
- 1. 本站所有資源如無特殊說明,都需要本地電腦安裝OFFICE2007和PDF閱讀器。圖紙軟件為CAD,CAXA,PROE,UG,SolidWorks等.壓縮文件請下載最新的WinRAR軟件解壓。
- 2. 本站的文檔不包含任何第三方提供的附件圖紙等,如果需要附件,請聯系上傳者。文件的所有權益歸上傳用戶所有。
- 3. 本站RAR壓縮包中若帶圖紙,網頁內容里面會有圖紙預覽,若沒有圖紙預覽就沒有圖紙。
- 4. 未經權益所有人同意不得將文件中的內容挪作商業或盈利用途。
- 5. 人人文庫網僅提供信息存儲空間,僅對用戶上傳內容的表現方式做保護處理,對用戶上傳分享的文檔內容本身不做任何修改或編輯,并不能對任何下載內容負責。
- 6. 下載文件中如有侵權或不適當內容,請與我們聯系,我們立即糾正。
- 7. 本站不保證下載資源的準確性、安全性和完整性, 同時也不承擔用戶因使用這些下載資源對自己和他人造成任何形式的傷害或損失。
最新文檔
- 2022年大學輕工紡織食品專業大學物理下冊開學考試試題C卷-附解析
- 石河子大學《云計算概論》2023-2024學年期末試卷
- 大學生舉辦母親節策劃書集合10篇
- 學校配套設施施工組織設計
- 石河子大學《體操》2021-2022學年第一學期期末試卷
- 石河子大學《農村社會學》2022-2023學年第一學期期末試卷
- 石河子大學《畜產品加工工藝學》2022-2023學年第一學期期末試卷
- 沈陽理工大學《模擬電子技術基礎》2021-2022學年期末試卷
- 沈陽理工大學《機械制造基礎》2023-2024學年第一學期期末試卷
- 收費站收費班安全培訓
- GB/T 30680-2014氟橡膠板通用技術條件
- GB/T 16830-2008商品條碼儲運包裝商品編碼與條碼表示
- GB 5226.1-2008機械電氣安全機械電氣設備第1部分:通用技術條件
- GA/T 850-2021城市道路路內停車位設置規范
- 雙代號網絡計劃圖習題
- 第2課 新航路開辟后的食物物種交流 課件-高中歷史統編版(2019)選擇性必修二經濟與社會生活
- 鈑金沖壓件質量要求
- 背景調查管理規定(9篇)
- 船舶電氣設備及系統船舶照明系統管理-課件
- 高效管理溝通新課件
- 2022年中國鐵路武漢局集團有限公司校園招聘筆試試題及答案解析
評論
0/150
提交評論