歐洲鋼管標準編號

1、我的文章歐洲鋼管標準(EN steel pipe standards)(2010/11/27 14:26)目錄： 公司動態 瀏覽字體：大中小編號中文名稱英文名稱EN 10028-7-2000壓力用途的鋼板制品第7部分：不銹鋼管Flat products made of steels for pressure purposes - Part 7: Stainless steelsEN 10208-1-1997易燃流體管道用鋼管交貨技術條件第1部分：符合A類要求的管材Steel pipes for pipelines for combustible fluids - Technical deliv

2、ery conditions - Part 1: Pipes of requirement class AEN 10208-2-1996+AC-1996易燃流體管道用鋼管交貨技術條件第2部分：符合B類要求的管材Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class BEN 10216-1-2002壓力用途的無縫鋼管交貨技術條件第1部分：有規定室溫特性的非合金鋼管Seamless steel tubes for pre

3、ssure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-1/prA1 (2003-07).EN 10216-2-2002壓力用途的無縫鋼管交貨技術條件第2部分：有規定高溫特性的非合金及合金鋼管Seamless steel tubes for pressure purposes - Technical delivery conditions -

4、 Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (2003-07).EN 10216-3-2002壓力用途的無縫鋼管交貨技術條件第3部分：合金細晶粒鋼管Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Not

5、e: To be amended by EN 10216-3/prA1 (2003-07).EN 10216-4-2002壓力用途的無縫鋼管交貨技術條件第4部分：有規定低溫特性的非合金及合金鋼管Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties / Note: To be amended by EN 10216-4/prA1 (20

6、03-07).EN 10217-1-2002壓力用途的焊接鋼管交貨技術條件第1部分：有規定室溫特性的非合金鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature propertiesEN 10217-2-2002壓力用途的焊接鋼管交貨技術條件第2部分：有規定高溫特性的電焊非合金及合金鋼管Welded steel tubes for pressure purposes - Te

7、chnical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-3-2002壓力用途的焊接鋼管交貨技術條件第3部分：合金細晶粒鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 3: Alloy fine grain steel tubesEN 10217-4-2002

8、壓力用途的焊接鋼管交貨技術條件第4部分：有規定低溫特性的電焊非合金鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature propertiesEN 10217-5-2002壓力用途的焊接鋼管交貨技術條件第5部分：有規定高溫特性的埋弧焊非合金及合金鋼管Welded steel tubes for pressure purposes - Techni

9、cal delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-6-2002壓力用途的焊接鋼管交貨技術條件第6部分：有規定低溫特性的埋弧焊非合金鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Submerged arc welded non-alloy st

10、eel tubes with specified low temperature propertiesEN 10220-2002無縫和焊接鋼管單位長度的尺寸和質量Seamless and welded steel tubes - Dimensions and masses per unit lengthEN 10224-2002輸送液體（包括人類生活用水）用的非合金鋼管和管件交貨技術條件Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consum

11、ption - Technical delivery conditionsEN 10240-1997鋼管內或外保護覆層用于自動車間的熱浸電動覆膜規范Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings applied in automatic plantsEN 10246-1-1996鋼管的無損檢測第1部分：證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗Non destructive testing of steel

12、 tubes - Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightnessEN 10246-10-2000鋼管的無損檢測第10部分：鋼管缺陷探測用的自動熔弧焊鋼管焊縫的射線檢驗Non-destructive testing of steel tubes - Part 10: Radiographic testing of t

13、he weld seam of automatic fusion arc welded steel tubes for the detection of imperfectionsEN 10246-11-2000鋼管的無損檢測第11部分：表面缺陷探測用的無縫和焊接鋼管的液體滲透檢驗Non-destructive testing of steel tubes - Part 11: Liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfectionsEN 1024

14、6-12-2000鋼管的無損檢測第12部分：表面缺陷探測用的無縫和焊接鐵磁鋼管的磁粉檢驗Non-destructive testing of steel tubes - Part 12: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfectionsEN 10246-13-2000鋼管的無損檢測第13部分：無縫和焊接鋼管（埋弧焊除外）自動全周界厚度的超聲檢驗Non-destructive testing of stee

15、l tubes - Part 13: Automatic full peripheral ultrasonic thickness testing for seamless and welded (except submerged arc welded) steel tubesEN 10246-14-1999鋼管的無損檢測第14部分：層狀缺陷探測用的無縫和焊接鋼管(埋弧焊接除外)的自動超聲檢驗Non-destructive testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded

16、(except submerged arc-welded) steel tubes for the detection of laminar imperfectionsEN 10246-15-2000鋼管的無損檢測第15部分：層狀缺陷探測用的制造焊接鋼管用鋼帶/鋼板的自動超聲檢驗Non-destructive testing of steel tubes - Part 15: Automatic ultrasonic testing of strip/plate used in the manufacture of welded steel tubes for the detection of

17、 laminar imperfectionsEN 10246-16-2000鋼管的無損檢測第16部分：層狀缺陷探測用的焊接鋼管焊縫附近區域的自動超聲檢驗Non-destructive testing of steel tubes - Part 16: Automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfectionsEN 10246-17-2000鋼管的無損檢測第17部分：層狀缺陷探測用的無縫和焊接鋼

18、管端部的自動超聲檢驗Non-destructive testing of steel tubes - Part 17: Ultrasonic testing of tube ends of seamless and welded steel tubes for the detection of laminar imperfectionsEN 10246-18-2000鋼管的無損檢測第18部分：層狀缺陷探測用的無縫和焊接鐵磁鋼管端部的磁粉檢驗Non-destructive testing of steel tubes - Part 18: Magnetic particle inspection

19、 of the tube ends of seamless and welded ferromagnetic steel tubes for the detection of laminar imperfectionsEN 10246-2-2000鋼管的無損檢測第2部分：證明液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管（埋弧焊除外） 的自動渦流Non-destructive testing of steel tubes - Part 2: Automatic eddy current testing of seamless and welded (except submerged arc-w

20、elded) austenitic and austenitic-ferritic steel tubes for verification of hydraulic leak-tightnessEN 10246-3-1999鋼管的無損檢測第3部分：缺陷探測用無縫和焊接鋼管(埋弧焊除外)的自動渦流檢驗Non-destructive testing of steel tubes - Part 3: Automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for

21、the detection of imperfectionsEN 10246-4-1999鋼管的無損檢測第4部分：橫向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁Non-destructive testing of steel tubes - Part 4: Automatic full peripheral magnetic transducer/flux leakage testing of seamless ferromagnetic steel tubes for the detection of transverse imperfectionsEN 1024

22、6-5-1999鋼管的無損檢測第5部分：徑向缺陷探測用無縫或焊接鐵磁鋼管的（埋弧焊除外）自動全周界磁傳感器檢驗漏磁Non-destructive testing of steel tubes - Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for the detection of longitudinal imperfectionsE

23、N 10246-6-1999鋼管的無損檢測第6部分：橫向缺陷探測用無縫鋼管的自動全周界超聲檢驗Non-destructive testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfectionsEN 10246-7-1996鋼管的無損檢測第7部分：縱向缺陷探測用的無縫和焊接鐵磁鋼管(埋弧焊除外)的自動周界超聲檢驗Non destructive testing of ste

24、el tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfectionsEN 10246-8-1999鋼管的無損檢測第8部分：縱向缺陷探測用電焊鋼管焊縫的自動超聲檢驗Non-destructive testing of steel tubes - Part 8: Automatic ultrasonic testing

25、 of the weld seam of electric welded steel tubes for the detection of longitudinal imperfectionsEN 10246-9-2000鋼管的無損檢測第9部分：探測用縱向和/或橫向缺陷埋弧焊鋼管焊縫的自動超聲檢驗Non-destructive testing of steel tubes - Part 9: Automatic ultrasonic testing of the weld seam of submerged arc welded steel tubes for the detection of

26、 longitudinal and/or transverse imperfectionsEN 10256-2000鋼管的無損檢測1級和2級無損檢測人員的資格和能力Non-destructive testing of steel tubes - Qualification and competence of level 1 and 2 non-destructive testing personnelEN 10266-2003鋼管、配件和結構空心型材 .產品標準中使用的符號和術語定義Steel tubes, fittings and structural hollow sections - S

27、ymbols and definitions of terms for use in product standardsEN 10288-2002岸上和海上管路鋼管及配件外表兩層噴涂聚乙烯底化Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatingsEN 10289-2002岸上和海上管路鋼管及配件加有環氧樹脂和改性環氧樹脂膠的外用液體Steel tubes and fittings for onshore and of

28、fshore pipelines - External liquid applied epoxy and epoxy-modified coatingsEN 10290-2002岸上和海上管路鋼管及配件加有聚氨脂和改性聚氨脂膠的外用液體Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatingsEN 10296-1-2003機械和一般工程用途的焊接圓形鋼管交貨技術條件第1部分：非合金鋼管和合

29、金鋼管Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubesEN 10297-1-2003機械和一般工程用途的無縫圓形鋼管交貨技術條件第1部分：非合金鋼管和合金鋼管Seamless circular steel tubes for mechanical and general engineering purposes - Technical delive

30、ry conditions - Part 1: Non-alloy and alloy steel tubesEN 10301-2003岸上和海上管路鋼管及配件減小非腐蝕性氣體輸送摩擦力的內涂層Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gasEN 10305-1-2002高精密度用途的鋼管交貨技術條件第1部分：冷拔無縫鋼管Steel tubes for precisi

31、on applications - Technical delivery conditions - Part 1: Seamless cold drawn tubesEN 10305-2-2002高精密度用途的鋼管交貨技術條件第2部分：冷拔焊接鋼管Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubesEN 10305-3-2002高精密度用途的鋼管交貨技術條件第3部分：冷定徑焊接鋼管Steel tubes for precision appl

32、ications - Technical delivery conditions - Part 3: Welded cold sized tubesEN 10305-4-2003高精密度用途的鋼管交貨技術條件第4部分：液壓和氣動系統用冷拔無縫鋼管Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systemsEN 10305-5-2003高精密度用途的鋼管交貨技術條

33、件第5部分：冷定徑方形和矩形焊接鋼管Steel tubes for precision applications - Technical delivery conditions - Part 5: Welded and cold sized square and rectangular tubesEN 10312-2002傳送人類消耗的含水液體（包括水）的焊焊接不銹鋼管 交貨技術條件Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption -

34、Technical delivery conditionsEN 1123-1-1999廢水系統用帶套管的縱向焊接熱浸鍍鋅鋼管管道及配件 第1部分：要求、測試和質量控制Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality controlEN 1123-1/prA1-2002廢水系統用帶套管的縱向焊接熱浸鍍鋅鋼管管道及配件 第1部

35、分：要求、測試和質量控制 修改A1Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1EN 1123-2-1999廢水系統用帶套管和插口的縱向焊接熱浸鍍鋅鋼管管道及配件 第2部分：尺寸Pipes and fittings of longitudinally welded hot-di

36、p galvanized steel pipes with spigot and socket for waste water systems - Part 2: DimensionsEN 1124-1-1999廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality

37、 controlEN 1124-1/prA1-2002廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第1部分：要求、測試、質量控制 修改A1Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control; Amendment A1EN 1124-2-1999廢水系統用帶套管和插口的縱向焊接不銹鋼管管道和配件 第2部分：系統S 尺寸P

38、ipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 2: System S - DimensionsEN 1124-3-1999廢水系統用帶套管和插口的縱向焊接不銹鋼管管道及配件 第3部分：系統X 尺寸Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water s

39、ystems - Part 3: System X - DimensionsEN 12068-1998陰極保護與陰極保護有關的埋于地下的或浸于水中的鋼管防腐的外部有機涂層、帶條和冷縮材料Cathodic protection - External organic coatings for the corrosion protection of buried or immersed steel pipelines used in conjunction with cathodic protection - Tapes and shrinkable materialsEN 12732-2000燃?xì)?/p>

40、供應系統焊接鋼管功能要求Gas supply systems - Welding steel pipework - Functional requirementsEN 39-2001管和連接腳手架用活動式鋼管 技術交貨條件Loose steel tubes for tube and coupler scaffolds - Technical delivery conditionsEN 642-1994包括接頭、配件的圓柱型和非圓柱型預應力混凝土壓力管和預應力鋼管的特殊要求Prestressed concrete pressure pipes, cylinder and non-cylinder

41、 type, including joints, fittings and specific requirement for prestressing steel for pipesEN 74-1988用于由鋼管制造的工作腳手架和工作架的管接頭、活動套管和底板 要求和試驗程序Couplers, loose spigots and base-plates for use in working scaffolds and falsework made of steel tubes; Requirements and test proceduresEN ISO 1127-1996不銹鋼管尺寸、公差和

42、單位長度的公稱質量Stainless steel tubes - Dimensions, tolerances and conventional masses per unit lengthEN ISO 11960-2001+AC-2002石油和天然氣工業油井套管和油管用鋼管Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2001)EN ISO 11961-1996石油和天然氣工業鉆井桿用鋼管規范Petroleum and natural ga

43、s industries - Steel pipes for use as drill pipe - Specification (ISO 11961:1996)EN ISO 13680-2001石油和天然氣工業用作套管、油管和接箍的防腐合金無縫鋼管交貨技術條件Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2

44、000)EN ISO 9455-12-1994軟釬焊劑試驗方法第12部分：鋼管腐蝕試驗Soft soldering fluxes - Test methods - Part 12: Steel tube corrosion test (ISO 9455-12:1992)prEN 10208-3-1997易燃流體管道用鋼管交貨技術條件第3部分：符合C類要求的管材Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 3: Pipes of requirement class C

45、prEN 10216-5-1998壓力用途的無縫鋼管交貨技術條件第5部分：不銹鋼管Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubesprEN 10217-7-1998壓力用途的焊接鋼管交貨技術條件第7部分：不銹鋼管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubesprEN 102

46、55-2002適用于焊接和加工螺紋的非合金鋼管交貨技術條件Non-alloy steel tubes suitable for welding or threading - Technical delivery conditionsprEN 10285-1996岸上和海上管路用鋼管及配件外部三層噴涂聚乙烯底化Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coatingsprEN 10286-1996岸上和海上管路用鋼管及配件外表三

47、層噴涂聚丙烯底化Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatingsprEN 10287-1996岸上和海上管路用鋼管及配件外表熔化聚乙烯底化Steel tubes and fittings for on and offshore pipelines - External fused polyethylene based coatingsprEN 10296-2-2001機械和一般工程用途的焊接鋼管交貨技術條件第2部分：不銹鋼管Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery condition