基于MATLAB科學計算器

1、目錄計算器的效果圖2一、GUI設計界面：31.打開GUI32.添加按鈕33.根據按鈕的作用及視覺效果做一定的修改：44.保存、添加功能函數4（1）數字鍵編寫4（2）符號鍵的編寫4（3）運算符“=”的編寫5（4）按鍵“back”的編寫5（5）按鍵“清空”的編寫5（6）按鍵“退出”的編寫5（7）按鍵“二進制數轉十進制數”的編寫5（8）按鍵“十進制數轉二進制數”的編寫5二、計算器的使用6除法運算（）6平方運算（2）6函數cos （/3） 的計算7函數arctan （/3） 的計算7以2為底的對數的計算（log 2）8十進制數轉二進制數的計算（調用dec2bin函數）8二進制數轉十進制數的計算（調用b

2、in2dec函數）9三、附各按鍵的程序源代碼10四、問題和解決方法15五、心得體會15參考文獻15計算器的效果圖:一、GUI設計界面：1.打開GUI輸入Guide 回車或者在工具欄上點擊圖標打開Guide 窗口：2.添加按鈕3.根據按鈕的作用及視覺效果做一定的修改：雙擊按鈕（Puch Button）進入按鍵屬性修改顯示字符串大小、字體和顏色，然后對按鈕的位置進行排布，盡量使按鈕集中在靜態文本框下面。4.保存、添加功能函數 把做好的按鈕及靜態文本框保存后自動彈出Editor的M文本，對然后對相應的pushbutton添加功能函數。以下是相應按鈕的功能函數。（1）數字鍵編寫在function pu

3、shbutton1_Callback(hObject, eventdata, handles）下輸入：textString = get(handles.text1,String);textString =strcat(textString,0);set(handles.text1,String,textString)這是使用句柄handles指向?qū)ο髏ext1，并以字符串形式來存儲數據文本框text1的內容，并存儲數個“0”，然后由set(handles.text1,String,textString在text1中輸出。同理，分別在function pushbutton210_Callback

4、(hObject, eventdata, handles）下給19數字按鍵下編寫此類程序。（2）符號鍵的編寫function pushbutton12_Callback(hObject, eventdata, handles)textString = get(handles.text1,String);textString =strcat(textString,);set(handles.text1,String,textString)strcat的作用是將兩個字符串連接起來，就是在已輸入的存儲數據textString后添加“”進行運算。然后執行set(handles.text1,String

5、,textString)。符號鍵-、*、/與的運算函數類似?！捌椒竭\(yùn)算”,主要是由“2”功能實現。（3）運算符“=”的編寫textString = get(handles.text1,String);ans =eval(textString);“eval”的作用是將符號表達式轉換成數值表達式。再由set(handles.text1,String,ans)輸出。（4）按鍵“back”的編寫textString=get(handles.text1, String)w=length(textString)t=char(textString)textString=t(1:w-1) %將w個字符串轉成w

6、-1個，即刪除了末位字符set(handles.text1,String,textString)（5）按鍵“清空”的編寫set(handles.text1,String,)（6）按鍵“退出”的編寫close(gcf);（7）按鍵“二進制數轉十進制數”的編寫 textString=get(handles.text1,String)e = bin2dec(textString); set(handles.text1,String,e);（8）按鍵“十進制數轉二進制數”的編寫 textString = get(handles.text1,String);textString = strcat(tex

7、tString,dec2bin();set(handles.text1,String,textString)二、計算器的使用除法運算（） 16 / 16平方運算（2）函數cos （/3） 的計算 函數arctan （/3） 的計算 以2為底的對數的計算（log 2） 十進制數轉二進制數的計算（調用dec2bin函數）二進制數轉十進制數的計算（調用bin2dec函數） 經過計算，這些結果均與實際結果相吻合，計算器的功能實現的完好且能實現較大數值的運算，計算結果用科學技術法表示。三、附各按鍵的程序源代碼按鍵“0-9、+、-、.、= 、x2 ”（通過get函數獲得輸入的字符，函數strcat 獲得相

8、應字符,并用set函數進行顯示輸出）：function pushbutton1_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,0)set(handles.text1,String,textString)function pushbutton2_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textStri

9、ng,1)set(handles.text1,String,textString)function pushbutton3_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,2)set(handles.text1,String,textString)function pushbutton4_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)text

10、String=strcat(textString,3)set(handles.text1,String,textString)function pushbutton5_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,4)set(handles.text1,String,textString)function pushbutton6_Callback(hObject, eventdata, handles)textString=get(han

11、dles.text1,String)textString=strcat(textString,5)set(handles.text1,String,textString)function pushbutton7_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,6)set(handles.text1,String,textString)function pushbutton8_Callback(hObject, eventdata, hand

12、les)textString=get(handles.text1,String)textString=strcat(textString,7)set(handles.text1,String,textString)function pushbutton9_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,8)set(handles.text1,String,textString)function pushbutton10_Callback(h

13、Object, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,9)set(handles.text1,String,textString)function pushbutton11_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,+)set(handles.text1,String,textString)function

14、 pushbutton12_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,-)set(handles.text1,String,textString)function pushbutton13_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,*)set(handles.text1,St

15、ring,textString)function pushbutton14_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textString,/)set(handles.text1,String,textString)function pushbutton15_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textString=strcat(textStrin

16、g,.)set(handles.text1,String,textString)按鍵“=” ：function pushbutton16_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)s=eval(textString)set(handles.text1,String,s)按鍵“x2” ： function pushbutton17_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)textStrin

17、g=strcat(textString,2)set(handles.text1,String,textString)退位鍵“back”：function pushbutton18_Callback(hObject, eventdata, handles)textString=get(handles.text1,String)w=length(textString)t=char(textString)textString=t(1:w-1)set(handles.text1,String,textString)清空鍵：function pushbutton19_Callback(hObject,

18、eventdata, handles)set(handles.text1,String,)退出鍵：function pushbutton20_Callback(hObject, eventdata, handles)close(gcf);% hObject handle to pushbutton20 (see GCBO)% handles structure with handles and user data (see GUIDATA)科學計算函數：按鍵“”：通過get函數獲得輸入的字符，函數strread獲得輸入字符,并用sqrt函數計算結果，set函數進行顯示輸出textString

19、= get(handles.text1,String);if(strcmp(textString,0)=1) set(handles.text1,String,0) ;elsea = strread(textString, %f);a=sqrt(a);set(handles.text1,String,a)end按鍵“sin” （通過get函數獲得輸入的字符，函數strread獲得輸入字符,并用sin函數計算結果，set函數進行顯示輸出）：textString = get(handles.text1,String);textString = strcat(textString,sin();set

20、(handles.text1,String,textString)按鍵“cos” ：textString = get(handles.text1,String);textString = strcat(textString,();set(handles.text1,String,textString)按鍵“tan” ： textString = get(handles.text1,String);if(strcmp(textString,1.57)=1)|(strcmp(textString,-1.57)=1) set(handles.edit1,String,inf);elsetextStr

21、ing = strcat(textString,tan();set(handles.text1,String,textString)end按鍵“arcsin” ： textString = get(handles.text1,String);textString = strcat(textString,asin();set(handles.text1,String,textString)按鍵“arccos” ： textString = get(handles.text1,String);textString = strcat(textString,acos();set(handles.tex

22、t1,String,textString)按鍵“arctan” ： textString = get(handles.text1,String);textString = strcat(textString,atan();set(handles.text1,String,textString)按鍵“l(fā)og2” ： textString = get(handles.text1,String);if(strcmp(textString,0)=1) set(handles.text1,String,error) ;elsea = strread(textString, %f);a=log2(a);s

23、et(handles.text1,String,a)end按鍵“(” ： textString = get(handles.text1,String);textString = strcat(textString, ();set(handles.text1,String,textString)按鍵“)” ： textString = get(handles.text1,String);textString = strcat(textString,);set(handles.text1,String,textString)按鍵“二進制數轉十進制數” ：textString=get(handles

24、.text1,String)e = bin2dec(textString); set(handles.text1,String,e);按鍵“十進制數轉二進制數” ：textString = get(handles.text1,String);textString = strcat(textString,dec2bin();set(handles.text1,String,textString)四、問題和解決方法1.本次課程設計中開始時遇到的問題是數據進行清零后，再輸入其他的數據，清零后的字符0仍會保留，會影響其他數據，解決辦法是將數據用空格替換掉就實現了清空: set(handles.text1,String,)2.在定義正弦余弦等函數的時候，需要注意其定義域，值域的問題。3開始時我的“sin” 函數編程如下：textString = get(handles.text1,String);a = strread