法國焊接標準NF welding standards

1、編號中文名稱英文名稱NF A03-720-2-2002混凝土的鋼筋和預應力用鋼.試驗方法.第2部分:焊接纖維(Steel for the reinforcement and prestressing of concrete - Test methods - Part 2 : welded fabric.)NF A35-018-1984鋼筋混凝土用鋼筋.焊接的適合性(Concrete reinforcing bars. Suitability for welding.)NF A35-019-2-1996鋼筋混凝土用鋼筋.可焊刻痕絲制鋼筋.第2部分:焊接鋼筋網(Concrete reinforci

2、ng steels. Reinforcing steels made of weldable indented wires. Part 2 : welded fabric.)NF A35-021-1998混凝土用鋼材.用于增強鋼制備的可焊接金屬線(STEELS FOR CONCRETE. WELDABLE WIRES USED FOR THE FABRICATION OF REINFORCING STEELS.)NF A35-052-1987鋼鐵產品.帶改進粘附性的焊接鋼絲網和鋼絲用非合金鋼線材(Iron and steel. Unalloyed steel wire rod for weld

3、ed fabric and wire with improved adherence.)NF A36-000-1979結構鋼和鍋爐與壓力容器用鋼的焊接特性的推薦規范(RECOMMENDATIONS CONCERNING THE WELDABILITY OF STRUCTURAL STEEL AND OF BOILER AND PRESSURE VESSELS STEEL.)NF A36-205-5-2003壓力容器用鋼制扁平產品.第5部分:熱機軋制的可焊接細粒鋼(Flat products made of steels for pressure purposes - Part 5 : weld

4、able fine grain steels, thermomechanically rolled.)NF A36-205-6-2003壓力容器用鋼制扁平產品.第6部分:可焊接淬火和回火細粒鋼(Flat products made of steels for pressure purposes - Part 6 : weldable fine grain steels, quenched and tempered.)NF A36-211-1997焊接氣體氣缸用薄鋼板和條帶(Steel sheet and strip for welded gas cylinders.)NF A36-212-20

5、02固定近海結構的可焊接結構鋼.技術交貨條件(Weldable structural steels for fixed offshore structures - Technical delivery conditions.)NF A36-226-2001具有規定的高溫特性的壓力容器用熱軋可焊接鋼棒(Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties.)NF A36-605-1982鍋爐和壓力容器用焊接鋼沖壓鍛件.碳鋼和碳錳鋼.牌號與型號(Weld

6、able steel drip forged articles for boilers and pressure vessels. Carbon and carbon-manganese steels. Grades and types .)NF A36-606-1982鍋爐和壓力容器用焊接鋼沖壓鍛件.鉬、錳鉬和鉻鉬合金鋼.牌號和型號(Weldable steel drop forged articles for boilers and pressure vessels. Mo, Mn/Mo and Cr/Mo alloy steels. Grades and types.)NF A36-62

7、0-4-1999承壓用鋼鍛件.第4部分:高彈性強度的可焊接細粒鋼(STEEL FORGINGS FOR PRESSURE PURPOSES. PART 4 : WELDABLE FINE GRAIN STEELS WITH HIGH PROOF STRENGTH. (EUROPEAN STANDARD EN 10222-4).)NF A36-620-4/A1-2002承壓用鋼鍛件.第4部分:高彈性強度的可焊接細晶粒鋼(Steel forgings for pressure purposes - Part 4 : weldable fine grain steels with high proo

8、f strength.)NF A49-004-1984鋼管.無縫管和圓截面焊接管及焊接配件.尺寸總圖及優選(Steel tubes. Seamless and welded tubes with circular section and supplies to be welded. General outlay of dimensions. Preferential selection.)NF A49-005-2003焊接和無縫鋼管.管的尺寸和單位長度重量的一覽表(Seamless and welded steel tubes - General tables of dimensions an

9、d masses per unit length.)NF A49-141-1978鋼管.一般商業用中壓平端焊接鋼管.（尺寸.交貨技術條件.）(STEEL TUBES. WELDED PLAIN END TUBES OF COMMERCIAL QUALITY FOR GENERAL PURPOSES AT MEAN PRESSURE. DIMENSIONS TECHNICAL DELIVERY CONDITIONS.)NF A49-145-1978鋼管.熱加工細螺紋焊接鋼管.（尺寸.交貨技術條件.）(STEEL TUBES. HOT-FINISHED WELDED TUBES SUITABLE

10、FOR THREADING.DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-147-1980鋼管.一般用和管道用光端縱向焊接鋼管.奧氏體不銹鋼.（尺寸.交貨技術條件.）(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-148-1980鋼管.一般用和管道用光端縱向焊接鋼管.

11、鐵素體不銹鋼.（尺寸.交貨技術條件.）(STEEL TUBES. PLAIN END LONGITUDINALLY WELDED TUBES FOR PIPE LINES AND GENERAL USE. FERRITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-150-1985鋼管.水管系統用涂覆或保護焊接管.尺寸.交貨技術條件(Steel tubes. Welded tubes intended to be coated or protected for use in water piping

12、systems. Dimensions. Technical delivery conditions.)NF A49-151-2003包括飲用水在內的含水液體輸送用焊接不銹鋼管.交貨技術件(Welded stainless steel tubes for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditions.)NF A49-160-1979鋼管.混凝土包的加熱板用的焊接鋼管.（尺寸.交貨技術條件.）(STEEL TUBES. WELDED T

13、UBES FOR HEATING PANELS ENCASED IN CONCRETE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-170-1-1999對縫焊接管道配件.第1部分:一般使用和無特殊檢驗要求的鍛碳鋼(Butt-welding pipe fittings - Part 1 : Wrought carbon steel for general use and without specific inspection requirements.)NF A49-189-1980鋼管.90度鍍鋅3d樣式的焊接曲線.（尺寸.交貨技術條件

14、.）(STEEL TUBES. BUTT WELDING,NIGHT-ANGLED BENDS,3D,GALVANIZED DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-191-1975鋼管.毛細管焊接或焊接釬接用鋼或鑄鐵接頭.（尺寸.交貨技術條件.）(STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITI

15、ONS.)NF A49-192-1981鋼管.壓力容器用內螺紋非合金鋼焊接套管(STEEL TUBES. WELDED RINGS,INTERNALLY THREADED,FOR PRESSURE EQUIPMENT.)NF A49-201-1-2002焊接壓力鋼管.交貨技術條件.第1部分:規定室溫特性的非合金鋼管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1 : non-alloy steel tubes with specified room temperature pro

16、perties.)NF A49-201-2-2002焊接壓力鋼管.交貨技術條件.第2部分:規定高溫特性的電焊合金和非合金鋼管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2 : electric welded non-alloy and alloy steel tubes with specified elevated temperature properties.)NF A49-201-3-2002焊接壓力鋼管.交貨技術條件.第3部分:合金細晶粒結構鋼管(Welded stee

17、l tubes for pressure purposes - Technical delivery conditions - Part 3 : alloy fine grain steel tubes.)NF A49-201-4-2002焊接壓力鋼管.交貨技術條件.第4部分:規定低溫特性的電焊非合鋼管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4 : electric welded non-alloy steel tubes with specified low temper

18、ature properties.)NF A49-201-5-2002焊接壓力鋼管.交貨技術條件.第5部分:規定高溫特性的埋弧焊接非合金和合金鋼管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5 : submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties.)NF A49-201-6-2002焊接壓力鋼管.交貨技術條件.第6部分:規定低溫特

19、性的埋弧焊接非合金鋼管(Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6 : submerged arc welded non-alloy steel tubes with specified low temperature properties.)NF A49-244-1993鋼管.壓力設備用焊接奧氏體不銹鋼和奧氏鐵素體軋制鋼管的尺寸和技術交貨條件(STEEL TUBES. WELDED AUSTENITIC STAINLESS AND AUSTENITIC FERRITIC S

20、TEEL ROLLED TUBES FOR PRESSURE SERVICE. DIMENSIONS, TECHNICAL CONDITIONS FOR DELIVERY.)NF A49-247-1981鋼管.熱交換器用縱向焊接鋼管.奧氏體不銹鋼.尺寸.交貨技術條件(Steel tubes. Tubes welded longitudinally for heat exchangers. Austenitic stainless steels. Dimensions. Technical delivery conditions.)NF A49-249-1980鋼管.食品工業用光端縱向焊接鋼管.

21、奧氏體不銹鋼.尺寸.交貨技術條件(Steel tubes. Longitudinally welded plain end tubes for the food industry. Austenitic stainless steels. Dimensions. Technical delivery conditions.)NF A49-285-1982鋼管.有質量要求的非合金或合金鋼制對縫焊接橢圓底座.尺寸.交貨技術條件(Steel tubes. Unalloyed or alloy steel butt welding elliptic caps with quality requirem

22、ents. Dimensions. Technical delivery conditions.)NF A49-289-1990鋼管.用于高低溫條件下的對縫焊接管狀配件.非合金、合金和不銹鋼.尺寸.技術交貨條件(Steel tubes. Butt welding tubular fittings used at low and high temperature. Non alloy, alloy and stainless steels. Dimensions. Technical delivery conditions.)NF A49-296-1983鋼管.帶質量要求的熔焊非合金或合金鋼制等

23、徑或縮徑焊接三通管.尺寸.交貨技術條件(Steel tubes. Unalloyed or alloy steel butt welding tees made by saw process with equal or reduced branches, with quality requirements. Dimensions. Technical delivery conditions.)NF A49-300-2-2003精密裝置用鋼管.交貨技術條件.第2部分:焊接冷拉管(Steel tubes for precision applications - Technical delivery

24、 conditions - Part 2 : welded cold drawn tubes.)NF A49-300-3-2003精密裝置用鋼管.技術交貨條件.第3部分:焊接冷分級管(Steel tubes for precision applications - Technical delivery conditions - Part 3 : welded cold sized tubes.)NF A49-300-5-2003精密用途鋼管.技術交貨條件.第5部分:焊接冷精加工方形和矩形鋼管(Steel tubes for precision applications - Technical

25、delivery conditions - Part 5 : welded and cold sized square and rectangular tubes.)NF A49-341-1975鋼管.機械用精密焊接鋼管.（尺寸.交貨技術條件.）(STEEL TUBES-PRECISION WELDED TUBES FOR MECHANICAL APPLICATION-DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-343-1980鋼管.機械用D小于或等于168.3mm的縱向焊接鋼管.（尺寸.交貨技術條件.）(STEEL TUBES. LON

26、GITUDINALLY WELDED D INFERIOR OR EQUAL TO 168,3 MM FOR ENGINEERING USE. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)NF A49-540-1-1997非合金細晶粒結構鋼的冷成形焊接結構空心型材.第1部分:交貨技術要求(Cold form welded structural hollow sections of non-alloy and fine grain steels. Part 1 : technical delivery requirements.)NF A49-647-1

27、979鋼管.不銹鋼、鐵素體和奧氏體鋼制圓形、正方形、矩形或橢圓形建筑用焊接鋼管.（尺寸.交貨技術條件.）(STEEL TUBES. STRUCTURAL WELDED TUBES,CIRCULAR,SQUARE,RECTANGULAR OR OVAL,IN FERRITIC OR AUSTENITIC STAINLESS STEELS. DIMENSIONS. TECHNICAL CONDITIONS OF DELIVERY.)NF A49-716-1998鋼管.焊接接頭鍍膜配件和管的外結構.(STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITT

28、ING COATING FOR WELDED JOINT.)NF A49-875-1-1996鋼管的無損檢測.第1部分:證明液壓密封性用無縫和焊接鐵磁鋼管(埋弧焊除外)的自動電磁檢驗(Non destructive testing of steels tubes. Part 1 : automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.

29、)NF A49-875-11-2000鋼管的無損檢驗.第11部分:檢測表面缺陷用無縫和焊接鋼管的液體滲透試驗(Non-destructive testing of steel tubes - Part 11 : liquid penetrant testing of seamless and welded steel tubes for the detection of surface imperfections.)NF A49-875-12-2000鋼管的無損檢驗.第12部分:檢測表面缺陷用無縫和焊接錳鋼管的磁粉檢測(Non-destructive testing of steel tube

30、s - Part 12 : magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections.)NF A49-875-13-2000鋼管的無損檢驗.第13部分:無縫和焊接(埋弧焊)鋼管的自動全周邊超聲厚度檢測(Non-destructive testing of steel tubes - Part 13 : automatic full peripheral ultrasonic thickness testing f

31、or seamless and welded (except submerged ar welded) steel tubes.)NF A49-875-14-2000鋼管的無損檢驗.第14部分:層面缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動超聲試驗(Non-destructrive testing of steel tubes - Part 14 : automatic ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes detection of laminar imper

32、fections.)NF A49-875-15-2000鋼管的無損檢驗.第15部分:層面缺陷探測用焊接鋼管的生產用焊接帶材/板材自動超聲試驗(Non-destructive testing of steel tubes - Part 15 : automatic ultrasonic testing of strip/plate used in the manufacure of welded steel tubes for the detection of laminar imperfections.)NF A49-875-16-2000鋼管的無損檢驗.第16部分:層面缺陷探測用焊接鋼管的焊

33、縫鄰近區域的自動超聲試驗(Non-destructive testing of steel tubes - Part 16 : automatic ultrasonic testing of the area adjacent to the weld seam of welded steel tubes for the detection of laminar imperfections.)NF A49-875-17-2000鋼管的無損檢驗.第17部分:層面缺陷探測用無縫和焊接鋼管末端超聲試驗(Non-destructive testing of steel tubes - Part 17 :

34、 ultrasonic testing of tubes ends of seamless and welded steel tubes for the detection of laminar imperfections.)NF A49-875-18-2000鋼管的無損檢驗.第18部分:層面缺陷探測用無縫和焊接錳鋼管末端磁粉檢驗(Non-destructive testing of steel tubes - Part 18 : magnetic particle inspection of tube ends of seamless and welded ferromagnetic ste

35、el tubes for the detection of laminar imperfections.)NF A49-875-2-2000鋼管的無損檢驗.第2部分:檢驗液壓密封性用無縫和焊接奧氏體和奧氏體鐵素體鋼管(埋弧焊除外)的自動渦流試驗(Non-destructive testing of steel tubes - Part 2 : automatic eddy current testing of seamless and welded (except submerged arc-welded) austenitic and austenitic-ferritic steel tu

36、bes for verification of)NF A49-875-3-2000鋼管的無損檢驗.第3部分:檢測缺陷用無縫和焊接鋼管(埋弧焊除外)的自動渦流試驗(Non-destructive testing of steel tubes - Part 3 : automatic eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections.)NF A49-875-5-2000鋼管的無損檢驗.第5部分:檢測縱向缺陷用

37、無縫和焊接(除埋弧焊)錳鋼管的自動全周邊電磁變換器/磁漏試驗(Non-destructive testing of steel tubes - Part 5 : automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for)NF A49-875-7-1996鋼管的無損試驗.第7部分:縱向缺陷探測用無縫鋼管和焊接(除埋弧焊外)鋼管的自動全周邊超聲波試驗(Non

38、destructive testing of steel tubes. Part 7 : automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.)NF A50-425-1998輕金屬及其合金.危險產品傳輸箱構造可焊接產品(ALUMINIUM AND ALUMINIUM ALLOYS. WELDABLE PRODUCTS FOR THE

39、CONSTRUCTION OF TANKS FOR THE TRANSPORTATION OF DANGEROUS GOODS.)NF A50-650-4-1997鋁和鋁合金.擠壓棒材.焊接設備的特殊要求(Aluminium and aluminium alloys. Drawing stock. Part 4 : specific requirements for welding applications.)NF A50-802-1988鋁和鋁合金.大直徑焊接管.尺寸和公差(ALUMINIUM AND ALUMINIUM ALLOYS. LARGE DIAMETER WELDED TUBES

40、. DIMENSIONS AND TOLERANCES.)NF A51-307-2003銅和銅合金.焊接和釬焊用棒材和線材(Copper and copper alloys - Rod and wire for welding and braze welding.)NF A80-002-2003焊接.焊接和相關工藝的多語種術語列表(Welding - Multilingual list of terms for welding and related processes.)NF A80-010-1997焊接.工作位置.坡度角和旋轉角的定義(Welds. Working positions. D

41、efinitions of angles of slope and rotation.)NF A80-021-2000焊接及有關工藝.工藝和參考值的命名(Welding and allied processes - Nomenclature of processes and reference numbers.)NF A80-022-1999焊接.帶說明的多語種接頭術語(WELDING. MULTILINGUAL TERMS FOR WELDED JOINTS WITH ILLUSTRATIONS. (EUROPEAN STANDARD EN 12345).)NF A80-230-1-1998

42、焊接和合金過程.金屬材料幾何缺陷的分類.第1部分:熔焊(歐洲標準6520-1)(Welding and allied processes. Classification of geometric imperfections in metallic materials. Part 1 : fusion welding.)NF A80-230-2-2003焊接和相關工藝.金屬材料中幾何缺陷的分類.第2部分:帶壓焊接(Welding and allied processes - Classification of geometric imperfections in metallic materia

43、ls - Part 2 : welding with pressure.)NF A81-053-1989焊接.釬焊.硬釬焊.焊條.驗收試驗規程(WELDING. BRASING. SOLDERING. BRAZE-WELDING. FILLER MATERIALS. ACCEPTANCE TESTING PROCEDURES.)NF A81-056-2000焊條.焊接及有關工藝用焊條的生產、供應和分配的質量要求(Welding consumables - Quality requirements for manufacture, supply and distribution of consu

44、mables for welding and allied processes.)NF A81-303-2003手工電弧焊用涂敷焊條.焊接金屬沉積方法.硬度試驗(Covered electrodes for manual metal arc welding - Procedure for the deposition of weld metal - Hardness tests.)NF A81-304-2002焊接消耗品.化學分析用的焊接金屬墊片的沉積(Welding consumables - Deposition of a weld metal pad for chemical analy

45、sis.)NF A81-305-2001焊接和有關工藝.鐵素體鋼電弧焊金屬中氫含量的測定(Welding and allied processes - Determination of hydrogen content in ferritic steel arc weld metal.)NF A81-309-1995焊接可熔化性.非合金和低合金鋼的手工金屬弧焊接用藥皮焊條(Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classif

46、ication.)NF A81-320-2001焊接消耗品.通過測量可擴散氫測定手工電弧焊電極的抗?jié)裥?Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen.)NF A81-325-1997焊條.非合金鋼和細晶粒鋼制惰性氣體保護鎢焊接用棒材,線材和鍍層(WELDING CONSUMABLES. RODS, WIRES AND DEPOSITS FOR TUNGSTEN INERT

47、 GAS WELDING OF NON-ALLOY AND FINE GRAIN STEELS. CLASSIFICATION. (EUROPEAN STANDARD EN 1668).)NF A81-331-1984焊接、硬釬焊和硬焊鋁及鋁合金用填充金屬材料.符號.規范(Filler materials for welding, brazing and braze welding aluminium and aluminium alloys. Symbolization. Specifications.)NF A81-340-1997焊條.高強度鋼的手工電弧焊接用金屬藥皮焊條.分類(歐洲標準

48、EN 757)(Welding consumables. Covered electrodes for manual metal arc welding of high strength steels. Classification.)NF A81-350-1997焊條.非合金鋼及細粒鋼的有和無氣體保護的金屬電弧焊接用管狀焊絲.分類(歐洲標準EN 758)(Welding consumables. Tubular cored electrodes for metal arc welding with and without a gas shield of non aloy and fine g

49、rain steels. Classification.)NF A81-361-1999焊接.填充材料(歐洲標準EN 1044)(Brazing. Filler metals.)NF A81-362-2002焊接.軟釬焊.釬焊.硬釬焊.軟釬焊、釬焊及硬釬焊用焊料.分類、編碼和驗收試驗(Welding, soldering, brasing, braze-welding - Filler metals for soldering, brazing and braze-welding - Classification, coding, acceptance testing.)NF A81-369-

50、1995軟釬焊、硬釬焊接和銅焊用填充金屬.命名(歐洲標準EN ISO 3677)(FILLER METAL FOR SOFT SOLDERING, BRAZING AND BRAZE WELDING. DESIGNATION. (EUROPEAN STANDARD EN ISO 3677).)NF A81-410-1984鋁和鋁合金.焊接、硬釬焊和釬焊.基礎產品和焊條的選擇(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING,BRAZING AND BRAZE WELDING. BASE MATERIALS AND SELECTION OF FILLER MATER

51、IALS.)NF A81-900-1973鋁和鋁合金.焊接.焊劑的使用和檢查(ALUMINIUM AND ALUMINIUM ALLOYS. WELDING. USE AND TESTING OF WELDING FLUXES.)NF A82-001-1990電阻焊接設備.電阻焊和類似技術用電焊機電氣設備的安全規程(Safety requirements for the construction and the installation of equipment for resistance welding and allied processes.)NF A82-020-1985電阻焊接.電

52、阻焊機.規范和試驗(Electric resistance welding. Machines for electric resistance welding. Specifications and tests.)NF A82-025-1986電阻焊接.整流電流的電阻焊機.規范和試驗(ELECTRIC RESISTANCE WELDING. MACHINES FOR ELECTRIC RESISTANCE WELDING WITH RECTIFIED CURRENT. SPECIFICATIONS AND TESTS.)NF A82-030-1992電阻焊接設備的圖形符號(Graphical

53、symbols for resistance welding equipment.)NF A82-040-1985電阻焊接.電阻焊機用變壓器.適用于所有變壓器的通用規范(Electric resistance welding. Transformers for resistance welding machines. General specifications applicable to all transformers.)NF A82-041-1987電阻焊接.汽車工業中多點焊接用的帶分離式二次線組的變壓器.特殊規范(Resistance welding. Transformers wit

54、h two separate secondary windings for multispot welding as used in automobile industry. Particular specifications.)NF A82-043-1996電阻焊接.焊接槍用集成變壓器(Electric resistance welding. Integrated transformers for welding guns.)NF A82-045-1986電阻焊接.電阻焊機用多組整流器.規范和試驗(ELECTRIC RESISTANCE WELDING. RECTIFIER EQUIPMEN

55、T FOR RESISTANCE WELDING MACHINES. SPECIFICATIONS AND TESTS.)NF A82-100-1987電阻焊接.電阻焊接用電極材料及輔助設備(Electric resistance welding. Materials for resistance welding electrodes and ancillary equipments.)NF A82-104-1-2000電阻焊接設備.電極接頭,外錐度1:10.第1部分:圓錐形接頭,錐度1:10(Resistance welding equipment - Electrode adaptors,

56、 male taper 1:10 - Part 1 : conical fixing, taper 1:10.)NF A82-105-1985電阻焊接.帶電極帽、內錐度配合和凸頭電極帽的直電阻點焊電極.尺寸和公差(錐度1/10)(Electric resistance welding. Straight resistance spot welding electrodes with caps, male taper fits and male caps. Sizes and tolerances (taper 1/10).)NF A82-108-1992焊接滾輪坯料的尺寸(Dimensions

57、 of seam welding wheel blanks.)NF A82-110-2001電阻焊接設備.與水冷部分連接的二級連接電纜.尺寸和特性(Resistance welding equipment - Secondary connecting cables with terminals connected to water-cooled lugs - Dimensions and characteristics.)NF A82-112-2-2002電阻焊接水冷次級線圈連接電纜.第2部分:單根導線連接電纜的尺寸及要求(Water-cooled secondary connection cables for resistance welding - Part 2 : dimensions and requirements for single-conductor connection cables.)NF A82-112-3-1996電阻焊接水冷次級線圈連接電纜.第3部分:試驗要求(WATER-COOLED SECONDARY CONNECTION CABLES FOR RESISTANCE WELDING. PART 3 : TEST REQUIREMENTS. (EUROPEAN STANDARD EN ISO 8205-3)