物流工程-基于仿真技術康師傅出庫效率優化設計論文

1、本文格式為word版，下載可任意編輯物流工程-基于仿真技術康師傅出庫效率優化設計論文 abstract with the continuous development of economy and science and technology, logistics industry has gradually become a new industry and developed rapidly. internationally, logistics industry has become one of the important indicators to evaluate the mode

2、rnization level and comprehensive national strength of a country. the logistics process is composed of many links, among which the warehousing process is the most important and indispensable part in the logistics process. however, in china, there are still some deficiencies in the logistics enterpri

3、ses, such as in the outbound link, because of the imperfection of some work processes, which affects the work efficiency of enterprises and increases many unnecessary costs. we use simulation software to simulate the warehouse out process of logistics enterprises, analyze the result data to find som

4、e existing problems, and make targeted corrections, so as to achieve the optimization purpose of saving costs and increasing work efficiency. in this design, the warehouse center of master kang (shenyang) beverage co., ltd. is selected as the research object. through field visit and investigation, t

5、he layout of the plant area and the outbound process are understood, and the relevant data required in the outbound link are collected. based on the above data, the simulation research is carried out through the simulation software flexsim. after the completion of the modeling, the simulation model

6、is run to get the running results, and then the running results are analyzed to find the bottleneck that affects the efficiency, and some problems in the delivery process can be found. to solve the bottleneck problem, we designed the corresponding outbound optimization scheme for master kong beverag

7、e company, modeled the optimization scheme again, and verified the effectiveness of the improvement measures through the simulation analysis of the optimized model. the purpose is to provide reference and suggestions for enterprises. keywords：automatic stereo library；out-of-library efficiency； flexs

8、im; simulation optimization 目 錄 第 1 章 緒論 . 4 1.1 討論背景 . 4 1.2 討論目的 . 4 1.3 討論內容及討論方法 . 5 1.3.1 討論內容 . 5 1.3.2 討論方法 . 5 1.4 設計框架 . 6 第 2 章 康師傅（沈陽）飲品有限公司狀況介紹及仿真方法介紹 . 8 2.1 康師傅（沈陽）飲品有限公司背景 . 8 2.2 康師傅（沈陽）飲品有限公司倉庫介紹 . 9 2.2.1 康師傅（沈陽）飲品有限公司倉庫全自動立體庫 . 9 2.2.2 康師傅（沈陽）飲品有限公司倉庫布局介紹 . 10 2.2.3 康師傅（沈陽）飲品有限公司自

9、動化立體庫布局圖介紹 . 10 2.3 康師傅（沈陽）飲品有限公司倉庫出庫狀況介紹 . 11 2.3.1 康師傅（沈陽）飲品有限公司倉庫信息流出庫流程介紹 . 11 2.3.2 康師傅（沈陽）飲品有限公司倉庫物流出庫流程介紹 . 12 2.3.3 日出庫品相及數量 . 14 2.4 仿真方法介紹 . 17 2.4.1 flexsim 簡介 . 17 2.4.2 flexsim 的基本術語 . 18 2.4.3 flexsim 仿真模型建立的步驟 . 20 第 3 章 基于 flexsim 的康師傅（沈陽）飲品有限公司出庫仿真設計 . 21 3.1 建立 flexsim 仿真模型 . 21 3.

10、1.1 flexsim 模型的構建 . 21 3.2.2 flexsim 參數的設置 . 25 3.2 仿真運行及數據收集 . 36 3.4 問題分析 . 40 3.4.1 對于系統出庫流程的分析 . 40 3.4.2 對于堆垛機的分析 . 41 3.4.3 對于分揀掃碼器的分析 . 42 3.4.4 對于暫存區的分析 . 42 3.4.5 對于合成器的分析 . 44 3.4.6 對于叉車的分析 . 44 第 4 章 基于 flexsim 的康師傅（沈陽）飲品有限公司出庫優化仿真設計 . 46 4.1 建立 flexsim 仿真模型 . 46 4.4.1 對系統出庫流程的優化 . 46 4.4.2 對于合成器的優化 . 49 4.