樁基施工安全方案模板

1、樁基施工安全方案樁基施工安全方案（WMS）Work Management System中國化學CNCEC1 .安全保證措施 Safety Assurance Measures1.1 正確使用各類勞動防護用品Correct usage of PPEi .進入施工現場作業人員一律穿結實的耐油底或鋼頭皮幫的防砸工作鞋。 在水坑內及積水處工作時必須穿防穿刺防水膠靴。Anyone who enters into the construction site has to wear strong antismashing work shoes. If you work in the water pond o

2、r flooded area, gumboots will be necessary.ii .進入施工現場作業人員必須佩戴符合國家標準的安全帽。如果安全帽超過有限期限、破裂或已損壞時立即更換。Anyone who enters into the construction site must wear qualified safety helmet. If the safety helmet is over the expiry date or damaged, then it must be replaced with new one.iii .在施工作業中易于燒手、刺手、燙手或嚴重磨手的作業

3、必須佩戴相應手套；電焊、氣焊作業時佩戴絕緣隔熱阻燃的電焊專用手套；電工佩戴絕緣手套。Workers have to wear proper gloves when they carry out those works which may damage hands in the process of construction; welding gloves and insulating gloves shall be equipped to welders and electricians, respectively.iv .在有可能出現飛濺物體時如切屑、沖刷、撬、敲打等，佩戴防護眼鏡和圍巾。焊

4、接、切割作時佩戴防沖擊和熱輻射的防護面罩，在有引發危險可能時設置防護網或屏 障。Safety goggles and scarfs shall be equipped to workers if any flying objects may be occurred. The relevant face shield also must be equipped to workers when they are welding or cutting something, protective nets or protective barriers have to be set up if nece

5、ssary.v .個人防護用品是實現安全生產的一項強制性預防措施，不得隨意變更或降低標準。No one could randomly change or lower the standards of PPE, because the usage of PPE is the most effective and preventive way to implement safe production.vi .使用防護用品前應檢查用品的安全性能，并做好防護用品的保養和保存。PPE should be inspected prior to usage, besides, they also have

6、to be saved and maintained well.1.2 設置安全警示標志標識Set up safety warning signsi.根據作業區域的危險程度及時設置相應的安全標志，多個安全標志牌在一起設置時，應按警告、禁止、指令、提示類型的順序，先左后右、先下后上排列。The relevant safety signs should be set up in accordance with the hazard level of construction area. When those safety signs are set up at the same time, the

7、y should be divided as per the functions, such as warning,prohibition, instruction and notice, besides, they shall be arranged in the principle of-firsteftid up- first".ii .安全標志牌和標簽應設在與安全有關的醒目地方，并使現場人員看見后有足夠的時間來注意它所表示的內容；局部信息標志應設在所涉及的相應危險地點或設 備(部件)附近的醒目處。Safety signs and safety labels should be

8、 sticked to somewhere eyecatching. Some of these signs should be set up to a prominent place where is near relatively dangerous place or equipment (parts).iii .安全標志牌和標簽不應設在門、窗、架等可移動的物體上，以免這些物體位置移動后，看不見安全標志。標志牌前不得放置妨礙認讀的障礙物。Safety signs and lables should not be set up on door, window or something movable which would make these signs hard to be found. Never place any barriers in front of signboard.iv .安全標志牌和標簽應設置在明亮的環境中。Safety signboard or lables should be placed in somewhere bright.v .安全標志牌