微電腦自動輸送金屬檢測儀

1、微電腦自動輸送金屬檢測儀Microcomputer automatic transmission Metal Detector 食品行業專用Food industry-specific使用說明書 東莞市鼎創電子科技有限公司地址:東莞市東城中路天寶工業區 網址:電話23109946 fax 錄Contents1、 概述Overview 2、 型號及主要技術參數Model and main technical parameters 3、 使用方法及操作規程The use of methods and procedures 4、 保養Mai

2、ntenance5、 故障排除及維修Troubleshooting and repair 6、 安全使用須知Safe Use of Information 7、 執行標準Implementation of standards1、 概 況Overview 我廠是從事金屬檢測儀研制、生產的專業制造商。我們專為食品、玩具、服裝行業研制設計的微電腦自動輸送金屬檢測儀，廣泛應用于冷凍食品、干鮮水產、面食肉食、食品添加劑、調味品、干鮮蔬果、面包糕點、方便食品、藥品、玩具、服裝、鞋業等行業，檢測漏落于原料或產品種的不銹鋼、鐵、銅、鉛等金屬雜質，再有效保障人民身體健康、產品安全出口等方面起到積極的作用。 My

3、 plants are engaged in metal detector development, production of professional manufacturers. We specifically for food, toys, apparel industry to develop the design of microcomputer automatic transmission metal detector is widely used in frozen foods, dry aquatic products, pasta, meat, food additives

4、, spices, dried fruits and vegetables, bakery, convenience foods, medicines, toys, clothing, footwear and other industries to detect leaks down to the raw materials or products of stainless steel, iron, copper, lead, metallic impurities, and then effectively protect people's health, product safe

5、ty and exports play an active role.微電腦型自動輸送金屬檢測儀，采用先進的高科技技術，檢測儀靈敏度高，穩定性好，抗干擾性強，食品行業專用金屬檢測儀機體采用不銹鋼結構，外觀既美觀又防銹，便于清洗。與食品接觸的輸送帶等部件符合美國食品FDA和USDA衛生標準。Microcomputer-based automatic transmission metal detector, use of advanced high-tech technology, detectors with high sensitivity and good stability, strong

6、 anti-jamming, food industry-specific metal detector with stainless steel body structure, appearance is beautiful and rust-proof, easy to clean. Conveyor belt in contact with food components such as the U.S. FDA and USDA food hygiene standards. 金屬檢測儀，根據實際要求，可配置輸送速度無級調速或對不合格品進行自動清楚裝置。 Metal detector,

7、 according to the actual requirements, can be configured conveyor speed or stepless speed regulation of nonconforming product automatically clear device.2、 型號及主要技術參數Model and main technical parameters 2.1型號2.1 Model 微電腦型自動輸送金屬檢測儀Microcomputer-based automatic transmission Metal Detector 2.2主要技術參數2.2

8、The main technical parameters 金屬檢測儀技術參數表Metal detector technology parameter table產品型號Product Model檢測尺寸mmDetect Size mm 檢測靈敏度Detection sensitivity適用范圍Scope結構特點Structural characteristics檢測窗口高度Detect window Height有效檢測寬度Effective detection WidthFe（mm）鐵球鋼球 Fe (mm) Iron ball ball 304Sus（mm）304306304Sus (m

9、m) 304 306微電腦自動輸送金屬檢測儀Microcomputer automatic transmissionMetal Detector3004402.0-2.53.0-3.5水產、各類食品、蔬果、糕點、藥品等行業Aquatic products, various types of food, fruits and vegetables, cakes, drugs, etc.不銹鋼結構Stainless steel structure微電腦自動輸送金屬檢測儀Microcomputer automatic transmissionMetal Detector2504401.5-2.02.

10、5-3.0微電腦自動輸送金屬檢測儀Microcomputer automatic transmissionMetal Detector2004401.2-1.52.3-2.5微電腦自動輸送金屬檢測儀Microcomputer automatic transmissionMetal Detector1504401.0-1.22.0-2.3微電腦自動輸送金屬檢測儀Microcomputer automatic transmissionMetal Detector1004000.8-1.01.5-2.0附注：可根據客戶特殊需要專門設計制造。Note: Customers with special n

11、eeds in accordance with design and manufacturing expertise.2.3靈敏度調整方式2.3 Sensitivity adjust the way鐵和非鐵磁性金屬（如不銹鋼）靈敏度分兩路，分別根據需要可調。Magnetic iron and non-ferrous metals (such as stainless steel) sensitivity at the two lines separately adjustable in accordance with required. 2.4報警方式2.4 Alarm mode 燈光和聲響同

12、時報警，并自動停機。Lights and alarm sounds simultaneously and automatically shutdown.2.5電源2.5 Power Supply電源：AC 220V 50HZPower: AC 220V 50HZ功率：305型 180W 205型 140WPower: 180W 205 Type 305 Type 140W 2.6外形尺寸2.6 Dimensions 長×寬×高mm L × W × H mm3、 使用方法及操作規程The use of methods and procedures 3.1安

13、裝及調整3.1 install and adjust 3.1.1檢測儀安放于平坦地面，應平穩，若不平穩調整四只底腳螺絲，使四只腳平穩著地，鎖緊螺帽。3.1.1 detector placed on a flat surface should be smooth, not smooth at the end of 4 feet adjust screw so that a smooth four legs, the locking nut.3.1.2輸送帶調整3.1.2 conveyor belt adjust 輸送帶一般處于輸送帶托板的中間位置，出廠前已調好。經過一段時間運行后，輸送帶位置可能

14、會左右偏離。調整時，用內六角扳手轉動機架端頭上的內六角螺絲，輸送帶偏向哪一邊，則轉動調節螺絲，使輸送帶張緊，貨轉動對面調節螺絲，使輸送帶松弛，每次調量要少，反復調整即可。Pallet conveyor belt conveyor belt generally at the middle position, the factory pre-tuned. After a period of time running, a conveyor belt may be about location deviated from. Adjust when Hexagon wrench rotating ra

15、ck Hexagon head screw, a conveyor belt on which side they preferred, the rotation adjustment screw, so that conveyor belt tensioning and goods across the rotation adjustment screw, so that conveyor belt to relax, the volume of each tune fewer repeatedly to adjust.3.2使用方法及操作規程3.2 the use of methods a

16、nd procedures 3.2.1開機前，應檢查檢測儀探頭，輸送帶上、下面，有無雜物、工具等，如有應清除。3.2.1 boot should check detector probe, a conveyor belt, the following, whether or not debris, tools, etc., if any should be clear.3.2.2開機3.2.2 Startup 將二只靈敏度旋鈕，調至中間任一位置，接通電源，按下控制面板上綠色“電源”按鈕，綠色燈亮說明機器有電，然后再按一下紅色“運行”按鈕，及其則正常運行。Sensitivity to two k

17、nobs, one to the middle term of office location, connected to power supply, press the control panel on the green "Power" button, green lights indicate the machine has electricity, and then click the red "Run" button, and its normal run. 3.2.3停機：按動面板綠色“電源”按鈕，則機器停機。3.2.3 downtime:

18、panel pressed green "Power" button, the machine downtime.3.2.4靈敏度調節3.2.4 Sensitivity adjustment 靈敏度高低以調節旋鈕刻度線所指示數值標定，數值越大表示靈敏度越高。應根據被檢物品的質量、包裝、客戶要求，設置靈敏度，以達到安全要求為準。High and low sensitivity knob to adjust the calibration line numerical calibration instructions, the higher the value the grea

19、ter the express sensitivity. Should be based on the quality of goods was seized, packaging, customer demands, and sensitivity to achieve the security requirements shall prevail. 3.2.5靈敏度校定3.2.5 Sensitivity Calibration 將隨機所帶靈敏度測試塊，放于運行的輸送帶上，調節二只靈敏度旋鈕，調至測試塊通過探頭能正常報警為準，表示檢測儀靈敏度校訂正常。Will be brought abou

20、t by the sensitivity of the test block were randomly put it in a running conveyor belt, the two sensitivity adjustment knob, to the test block through the probe to the normal alarm, whichever, Detector sensitivity express normal editing. 3.2.6檢測3.2.6 Detected3.2.6.1正常檢測前，將隨機試塊放于輸送帶上，如正常報警，即可進入正式檢測操作

21、。3.2.6.1 Detect normal before the random test block placed on the conveyor belt, such as a normal alarm, you can enter the formal detection operation.3.2.6.2在檢測過程中，必須每隔一小時進行靈敏度校定，以確認機器處于正常狀態，發現機器失靈，應立即停止檢測，排除故障后，再次校定靈敏度，確認機器正常，方可再進行檢測，對故障期間已檢物品應進行復檢，確保無漏檢現象。3.2.6.2 in the detection process, must be

22、at intervals of one hour to carry out a sensitivity calibration to verify that the machine is in normal state and found that mechanical breakdowns, should immediately stop testing, troubleshooting, the re-calibration sensitivity, confirmed the machine to normal, before any detection of fault items s

23、eized during the review should be conducted to ensure that no undetected phenomenon. 3.2.6.3檢測時，操作人員放置被檢物品動作應輕巧，不應觸碰探頭，防止產生振動，機器產生誤報警。3.2.6.3 Detect when the operator moves to place items to be seized should be lightweight and should not touch the probe, to prevent the generation of vibration, machi

24、ne-generated False Alarm. 3.2.6.4檢測時，檢測到產生報警的被檢物品，應再復檢一次，仍出現報警，則證明被檢物品種確實含有金屬物質，應當進行清除，排除后再復檢，直到不報警為止。3.2.6.4 Detect when detected have been reported to the police seized goods should be re-review time, the occurrence of alarm, then prove that the seizure of items containing metal material indeed, i

25、t should be clear, remove and then review, until the alarm is not far . 3.2.6.5被檢物品不宜太大，不能超過檢測通道，如果碰撞探頭會產生誤報警。3.2.6.5 items seized should not be too great, can not exceed the detection channel, if the collision between the probe will produce False Alarm.3.2.6.6機器再檢測中若出現異常響聲，應立即停機檢查，排除故障后再進行檢測。3.2.6.

26、6 Detection machines again if unusual sound, should be immediately shutdown inspection, troubleshooting and then tested. 3.2.6.7機器受振動或電源波動影響，偶爾會出現報警現象，屬正常現象，不是故障。3.2.6.7 machinery subject to vibration or power supply fluctuations, and occasional alarm phenomenon, the phenomenon is normal, not failur

27、e. 3.2.6.8每班檢測完應及時按下綠色“電源”按鈕，拔去電源插頭，切斷電源。3.2.6.8 End Detect class should be pressed green "Power" button and pulling the power plug, cut off the power.4、 保 養Maintenance 4.1每班檢測完畢，應對輸送帶、探頭進行保養，清除機器上的異物，特別注意探頭窗口下表面于輸送帶托板之間不允許有任何雜物。4.1 Detect class finished, deal with a conveyor belt, the pro

28、be to carry out maintenance, removal of foreign body in the machine, paying particular attention to the probe under the surface of the window between the pallets in the conveyor belt does not allow any debris. 4.2檢測儀清洗時，不允許用水沖洗探頭、電氣箱、電機，注意保持干燥。4.2 Detector rinsing of the probe is not allowed to wash

29、 with water, electrical boxes, motors, to keep dry. 4.3長時間不用或夏季濕度太大時，使用前須用毛巾將輸送帶、托板、電氣箱上的積聚水汽擦干，方可開機。4.3 a long time or do not have too much humidity in summer, the use of the former have to be a conveyor belt with a towel, sheet, electrical boxes on the accumulation of water vapor to dry in order t

30、o boot. 4.4定期對機器傳動部分檢查加油，對緊固螺絲如有松動應緊固。4.4 periodically checks the machine transmission parts come on, any loosening of the fastening screws should be fastening.5、 故障排除及維修Troubleshooting and repair 排除故障須確認再切斷電源情況下進行，排除電器故障應有具備相應資格電器人員進行。Troubleshooting and then have to cut off the power to confirm co

31、nducted by an electrical malfunction should be ruled out with appropriate personnel qualified electricians故障現象Fault phenomenon 故障原因The cause of the malfunction 排除方法Troubleshooting不能啟動Can not Start 保險絲斷運行按鈕斷或損壞Fuse running off button broken or damaged 換保險絲打開電器廠，檢查是否斷線，換按鈕Open the fuse for electrical

32、plants, check for disconnection, change button啟動時斷保險絲Starts off fuse 輸送帶與托板之間有積聚水汽早場輸送帶與托板粘接Pallet conveyor belt with the accumulation of water vapor between the morning and pallet conveyor bonding 按保養3條處理，并用手拉起輸送帶，使輸送帶與托板脫離3 by maintenance treatment, and hand pulling up a conveyor belt, so that wit

33、h the pallets from the conveyor belt檢測時放置物品出現報警現象Detect when the alarm is placed articles appeared 機架不穩固；托板固緊螺絲松動；操作不當，用力過猛Rack is not strong; pallets solid screw loosening tight; improper operation, too much force 調平底腳，固緊所有螺絲，輕放操作Tune flat feet, solid all the screws tight, light release operation電機

34、不運行無報警現象，電機運行出現間斷性報警現象Motor does not run without warning the phenomenon, the electrical operation of alarm intermittent phenomenon 輸送帶上有金屬雜物；輸送帶過松，碰撞探頭窗口下邊；輸送帶與托板間有雜物，碰撞探頭Have metal objects on the conveyor belt; conveyor belt too loose, collision probe beneath the window; pallets between conveyor be

35、lt and has all sorts of things, collision probe 檢查清除調節調節螺絲，張緊皮帶；檢查清除Check to clear, adjusting screw adjustment, belt tensioning; check clearance開機后電機不運行，觸碰探頭無任何報警現象Motor does not run after boot, to touch the probe without any alarm phenomenon電源插頭接觸不良，引起電路不振；電氣部分斷線出故障Bad plug, causing sluggish circui

36、t; electrical part of the fault line 重新插好插頭，不行再反復1-2次即可通知廠方派人修理Good re-inserted the plug, not again repeated 1-2 times can be sent to inform the factory repair開機，電機不運行，出現連續報警現象Boot, motor does not run, there is continuous alarm 電路板插座接觸不良；電路板無器件有故障Bad circuit board socket; circuit board has fault-fre

37、e devices 打開電氣箱蓋板，松開電路板固定螺絲，重新插好；通知我廠方聯系維修Open the electrical cover plates, loose circuit board screws, re-plugged; NOTICE contact my factory repair開機，電機運行，有報警現象，但不能自動停機Boot, motor running, has alarm, but should not automatically shutdown電子繼電器損壞，或集成塊損壞Electronic relay damaged, or chip damage 與廠方聯系，郵

38、寄配件Contact with the factory, mailing accessories六、安全使用須知Safe Use of Information6.1金屬檢測儀電源插頭采用單相（交流220V）三芯式，電部門要求的安全保證方式接線。6.1 metal detector using single-phase plug (AC 220V) three-core type, the electric department for the way security assurances wiring. 6.2用戶如需調換保險絲等電氣元件，必須切斷電源，以防觸電。6.2 users to c

39、hange fuses, etc. For electrical components must be cut off the power to against electric shock. 6.3從事電氣維修，必須是具有相應資格的專業人員，以保證人身和財產安全。6.3 engaged in electrical maintenance, must be qualified with the appropriate professionals, to ensure personal and property safety.七、執行標準 Implementation of standards

40、該產品執行Q/320683GHE2001標準。Q/320683GHE-2001 standard implementation of the product.金屬檢測儀操作說明Metal Detector Instructions 尊敬的客戶，再正常使用金屬檢測儀之前，請認真閱讀“使用說明書”。Dear customer, and then the normal use of metal detectors, please carefully read the "use instructions." 1、 正確安裝 Installed correctly 金屬檢測儀應安裝再

41、平坦地面上，將四只機架調節支撐腳平穩著地，四只萬向輪應離開地面。Metal detectors should be installed again on flat ground, the four legs to support a smooth adjustment rack landing, 4 Caster should be off the ground. 2、 開機 Boot 把機器箱控制面板上兩只靈敏度調節旋鈕調至刻度5-8位置，接通電源，按下控制面板上的綠色“電源”按鈕，等待幾秒鐘電流表指針從滿刻度返回任一指示刻度后，再按下紅色“運行”按鈕，機器正常運行。The machine

42、control panel box 2 sensitivity adjustment knob to dial 5-8 position, connect power supply, press the control panel on the green "Power" button and wait for a few seconds from full-scale ammeter pointer back any instructions calibration, and then press the red "Run" button, the m

43、achine normal operation.3、 靈敏度調節 Sensitivity adjustment1、 檢測靈敏度，即為檢測精度。1、Detection sensitivity, that is, detection accuracy 2、 金屬檢測儀靈敏度檢測規定：根據國際慣例及國家規定,金屬檢測儀檢測鐵磁場金屬雜質（鐵、鋼等），以檢測鐵球（Fe)為代表；檢測非鐵磁類金屬雜質（不銹鋼、銅、鋁、鉛等）以檢測不銹鋼球（Sus)為代表。兩種金屬均規定以球狀為統一衡量標準。2、Metal Detector Detect sensitivity provides that: Accordi

44、ng to international practice and national regulations, metal detectors detect the magnetic field Metallic iron (iron, steel, etc.), to detect the iron sphere (Fe) as representatives; Detect non-ferromagnetic metal impurities (steel, copper , aluminum, lead) to test stainless steel ball (Sus) for the

45、 representative. Two types of metal are required in order to unify criteria for the ball. 3、 檢測儀標稱的檢測靈敏度，均指再空機時測得的靈敏度。3、Detector nominal detection sensitivity, refer to re-air machines measured sensitivity. 4、 檢測儀的檢測靈敏度，再各種不同條件和環境下，會發生不同的變化。4、Detection sensitivity of the detector, and then a variety

46、 of different conditions and circumstances, different changes occur. 檢測窗口高度：檢測靈敏度隨窗口高度提高而降低。 Detect window height: a high detection sensitivity with the window lowered improve. 檢測物不同：裸裝物品、鋁箔包裝等靈敏度不同。 Detection of different objects: Gymnodinium loaded items, aluminum foil packaging different sensitivity. 檢測物的狀態不同：冷凍品、腌制品、含水產品等，靈敏度不同。 Detect the state of different object