出租車計價器控制系統的設計外文翻譯原文

1、abstractin this paper, a multi-channel taximeter that is able to deal with more than one passenger simultaneously is proposed.in order to demonstrate the theory of operation of the proposed system, a complete design for an experimental three-channel taximeter (whose prototype has been built under gr

2、ant from the egyptian academy for scientific and technological research) is presented.system location, outline, block diagrams as well as detailed circuit diagrams for the experimental taximeter are also included.1. introductiontransporting people in the morning from their homes to their works and b

3、ack in the afternoon has become a big problem in big cities especially in undeveloped countries. as a partial solution of this problem, the authorities in some countries had, unofficially, left the taxicab drivers to carry different passengers to different places at the same time. for example, a tax

4、icab with four seats may carry four different passengers without any relation between them except that their way of travelling is the same.accordingly, it has become very difficult to rely on the present conventional single-channel taximeter to determine the fare required from each passenger separat

5、ely. accordingly, an unfair financial relation was created between the taxicab driver, owner, passengers and the state taxation department.under these circumstances, taxicab drivers force the passengers to pay more than what they should pay. in some cases passengers had to pay double fare they shoul

6、d pay. with the present conventional single-channel taximeter, taxicab owners are not able to determine the daily income of their taxicab.in some cases (a taxicab with four seats) they may only get one quarter of the income of the taxicab (collected by the taxicab driver). from which they should pay

7、 the salary of the taxicab driver as well as the cost of fuel, minor and major repairs in addition to the car depreciation. as a matter of fact the position of the taxicab owners is not so bad as it seems. a general agreement has been reached between the taxicab drivers and owners such that the driv

8、ers should guarantee a fixed daily income to the owners as well as the paying for the cost of fuel as well as the minor repaires. even though the taxicab drivers still share the large portion ofthe income of the taxicab. also with the presence of the single-channel taximeter, it has become very diff

9、icult for the state taxation department to know the yearly income of the taxicab and accordingly it has become very difficult to estimate the taxes to be paid by the taxicab owners.in order to face this problem, the state taxation department had to impose a fixed estimated taxes for each seat of the

10、 taxicab whatever the income of the taxicab. in this paper, we introduced a multichannel taximeter that can deal with more than one passenger simultaneously. i t should be pointed out that by the term passenger we mean a one person or a group of related persons. i t should also be pointed out that o

11、ur proposed multi-channel taximeter is not, simply, a multi display readouts. as a matter of fact it contains logic circuits that automatically changes the fare per killometer of travelling distance or per minutes of 'waiting time according to the number of passengers hiring the taxicab. in the

12、following part and as an example, we will present a complete design for a three-channel taximeter.block diagrams as well as detailed circuit diagrams of the experimental three-channel taximeter are also included. a prototype has been built under grant from the egyptian academy for scientific and tec

13、hnological research.2. an experimental threechannel taximetertheory of operation of our experimental device to work as an electronic digital taximeter is based on t h e fact thathe speedometer cable rotates one revolution for each meter of travelling distance.accordingly, if the speedometer cable is

14、 coupled with a speed sensor that generates a single pulse for each meter of travelling distance, then our taximeter could be three up counter modules associated with a speed sensor unit.however, our experimental taximeter is not simply a three display readouts. as a matter offact it contains logic

15、circuits that automatically changes the fare per kilometer of travelling distance or per minutes of waiting time according to the number of passengers hiring the taxicab. the device may be splitted into two main parts: the first is the speed sensor unit which may be located anywhere in the taxicab s

16、uch that an easy coupling to the speedometer cable can be achieved. the second unit contains the main electronic circuit, the displayand control panel. the unit should be located somewhere in front of both the driver and the passengers.a possible components locations is shown in figure 1.a. speed se

17、nsor unitthe main function of this unit is to supply train of pulses whose frequency is proportional to the angular rotation of the wheels. a possible form of a speed sensor is shown in figure 2.if may consist of a tj.pica1 permanent magnet sine wave generator with its output connected to a pulse sh

18、apping circuit (two general purpose silicon diodes, 1k ohms resistor and a schmit trigger inverter).in order to find some way to detect the movement of the taxicab, the output of the sine wave generator is rectified through a general purpose silicon diode dl then smoothed by a 1000 f capacitor. the

19、output voltage at terminal q is then limited to the value of 4.7 volts by using a ik ohms resistor as well as a zener diode zd. the level of the voltage at terminal q would be high whenever the taxicab is moving and will be zero otherwise. this voltage can be used for the automatic switching from di

20、stance fare to time fare.b. main electronic and display unit a suggested shape for the main electronic anddisplay unit is shown in figure 3. the control and display panel contains all ' controls necessary for operating the taximeter as well as four readout displays. the first channel will give t

21、he sum of money required from the first passenger, while the second and third readouts are for the second and third passengers, respectively. the fourth readout will give the total income of the taxicab.the contents of the last readout should be nonvolatile and be able to be retained even during par

22、king the taxicab. the channel rotary selector switchs 1 , 2 and 3 have fully clockwise/anticlockwise positions. in the fully anticlockwise position, the counter of the corresponding readout is blancked and disabled.in the fully clockwise position, the counter is unblanked, cleared to zero and enable

23、d to be ready for counting the sum of money required from the first, second and third passengers, respectively.pushing the total sum pushbutton 4 unblanks the fourth readout enabling any person to retain the readout corresponding to the total income. after the release of the pushbutton, the fourth r

24、eadout will be blanked again. this unit also contains the main electronic circuit which will be fully described in the following section.3. describtion of the main electronic circuitthe general block diagram of the main electronic circuit is shown in figure 4. it consists of five subcircuits designa

25、ted by the symboles cti up to ct4supporting circuits, these are: the number of passenger deticition circuit cti, travelling distance scaling circuit ct2, waiting time scaling circuit ct3, circuit ct4 which generates clock pulses for the display circuit.a. number of passengers detection circuit ct1 a

26、s shown from the general block diagram, the circuit cti has three inputs i, 2 and 3 as well as three outputs j, k and l. the function of the circuit is to supply a high level voltage at terminals j, k or l if and only if one, two or three passengers are hiring the taxicab, respectively. the term pas

27、senger, here, means one person or a group of related persons. when a passenger is getting into the cab, we simply turn on a free readout display by turning the corresponding rotary selector switch to a fully clockwise direction.this will automatically disconnect the corresponding terminal i, 2 or 3

28、from ground. the logical relation between various input terminals i, 2 and 3 and the output terminals j, k and l is shown in table 1.as a combinational circuit we start the design by deriving a set of boolean functions. a possible simplified boolean functions that gives minimum number of inputs to g

29、ates may be obtained from table i.a possible logical diagram that is based on the above derived expressions is shown in figure 5.it consists of two inverters, four 2-input and, to3-input and two 3-input or gates b. tavelling distance scaling circuit ct2as shown from the block diagram of figure 4, th

30、e circuit ct2 has four input j, k, l and e and one output m. the function of the circuit is to supply a single pulse at the output m for a certain number of pulses generated at the output of the speed sensor (certain number of meters travelled by the taxicab), according to the number of passengers h

31、iring the car. a suggested fare per kilometer of travelling distance is shown in colomn two of table 2. the circuit, in this case, should supply a single pulse at the output m for every 100, 125 or 143 pulses generated at the input terminal eaccording to the level of voltage at input terminale 3, k

32、or l, respectively.our circuit could be, as shown in figure 5, three decade counters, connected as a three digit frequency divider whose dividing ratios 100, 125 and 143 are automatically selected by the voltage level at terminals j, k and l, respectively.a possible circuit diagram that may verify t

33、he above function is shown in figure 6. it consists of three decade counters type 7490, one bcd-to decimal decoder type 7445, three 4-input and, one 3-input andone 2-input and two 3-input or gates.c. time scaling circuit ct3as shown in the block diagram, the time scalingcircuit will have four inputs

34、 j, k, l and f and one output n. the function of this circuit and accordingto colomn three of table 2 (fare per 2 minuts of waiting time) is to supply a single pulse at the output n for every 120, 240 or 360 pulses supplied at the input terminal f from the i hz clock according to level of voltage at

35、 inputs j, k and l, respectively.time scaling circuit would be similar to the distance scaling circuit but with different diving ratios. a possible circuit diagram is shown in figure 7.it consists, in this case, of three decade counter type 7490, two 3-input and, one 5-input and, one 2-input and one

36、 3-input or gates.d. circuit ct4 which generates clock pulses for display circuitthe function of this circuit is to supply one, two or three pulses at the output terminal r for each pulse generated at any of the terminals n or m, according to the voltage level at the input terminals j, k or l, respe

37、ctively. the output p will receive a pulse for each pulse generated at any of the input terminals n or m. this function can be performed by the circuit shown in figure 8, it consists of one ripple counter type 7493, one half of a dual jk masterslave flip-flops circuit type 7476, three inverters, thr

38、ee 2-input and, one 3-input and, one 2-input or and one 3-input or gates. when a pulse is generated at either input terminals n or m, a high level voltage will be generated at the output q of the flip-flop. this will g a t e t h e i khz signal to be connected to the input a of the ripple counter as

39、well as to the output terminal r. when one, two or three pulses are counted by the ripple counter, according to the level of voltage at the input terminals j, k and l, respectively, a high is generated to reset the counter and change the state of the flip-flopsuch that q becomes low.hence, the 1 khz

40、 signal is disabled to reach the outputerminal r or the input a of the ripple counter. in order to ensure the proper function of the circuit, the flip-flop should be cleared whenever a new channel is operated. this has been achieved by the input 5 and will be explained later when describingthe funct

41、ion of the channels rotary selector switchs.e. display circuitas shown in figure 2, the display panel would contain three 4-digit displays that give the sum of money required from each passenger separately as well as a one six-digit display that gives the total income of the taxicab. a possible wiri

42、ng diagram for the display circuit is shown in figure 9. rotating any of the rotary selector switches to fully clockwise direction will supply the corresponding display by5 volts through terminals 1, 2 and 3, respectively.the corresponding display will be unblanked by supplying a low level of voltag

43、e through terminals a, c and g, respectively. keeping terminals 8, d and h, respectively, at low level will keep them reset to zero. the corresponding display is then enabled by removing the low voltage from terminals b, d, and h, respectively, to be ready for counting the sum of money required from

44、 the corresponding passenger starting from zero.the counting pulses for these three displays are supplied through terminal p. the total sumdisplay will be enabled whenever any of the three displays is enabled (this is done by a 3-input or gate as shown in figure 8). retaining the contents of the las

45、t display will be done by unblanking it by supplying a low level of voltage to terminal i as shown in figure 10 b.f. changing over between time and distance faresin the following part, two different methods for changing over between time andistance faresare suggested:the first is to switch to time f

46、are whenever the distance fare is less than the time fare. hence,a simple look to fares table (table 2) can show that time fare should be used whenever the taxicab moves with speed less than 50 m/min. a possible circuitthat can perform this switching action is shown in figure io c. it contains one r

47、pm limit switchand a one inverter as well as two 2-input and gates.the contacts of the limit switch are normally closed and will be opened whenever the angular speed of the speedometer cablexceeds 50 rmp. the second alternation is to connect the input of the inverter in figure 10 c. to the output te

48、rminal q of the speedometer circuit, figure 2.in this case, the switching into time fare will be done whenever the taxicab is at stand still.g. function of the rotary selector switches the voltage levels that should be supplied bythe terminals of the rotary selector switches in order to ensure prope

49、r operation by the electroniccircuit are given in table 3. connection of three rotary selector switches each witb four decks offive poles each, that satisfy the logic function of table 3, is shown in figure 10 a. rotating any of the three switches into fully clockwise direction will pass through fiv

50、e positions. the function of the rotary selector switches can be described starting from the first position passing through variousteps until reaching the final position as follows:initial position: in this position a low voltage level is applied to terminals i, 2 and 3, this will disconnect the 5 v

51、olts supply from the three first displays, set the three inputs of the number of passenger detection circuit cti to low level. a low voltage level is applied to terminals 8, d and h, this is to ensure that the total income display is disabled.voltage levels at terminals a, c, g and s are at no care

52、condition.step i: rotating any of the rotary selector switches one step toward clockwise direction will supply 5 volts to the corresponding display, provides a high level voltage at terminals 1, 2 or 3 indicating that one passenger have entered the taxicab. a high level voltage should be applied to

53、terminals a, c or g in order to ensure that the corresponding display is still blanked. other terminals b, d, h and s are kept unchanged. step 2: rotating the rotary selector switch onestep further, will change the state of voltages at terminal a, c or g to be at low level and unblanks the correspon

54、ding display. states of voltages at terminals i, 2, 3 and s are remained unchanged.terminals b, d and h should be remained at low level to ensure that the corresponding readoutis cleared to zero while unblanking the display.- 歡迎下載資料，下面是附帶送個人簡歷資料用不了的話可以自己編輯刪除，謝謝！下面黃顏色背景資料下載后可以編輯刪除x x x 個 人 簡 歷個人資料姓 名

55、：xxxx婚姻狀況：未婚照片出 生：1987-06-24政治面貌:團員性 別：男民 族：漢學 位：本科移動電話：專 業：英語電子郵件：地 址： 教育背景2006.9-2010.6吉林工程技術師范學院-外國語言文學系主修課程本科階段主修大學英語精讀，大學英語泛讀，英語口語，英語聽力，英語寫作，英語口譯，翻譯學，詞匯學，語法學，英美概況，英國文學，美國文學，語言學，日語，中外名勝。特長及興趣愛好除了有專業的英語方面知識外，我在校生活部工作一年, 在系宣傳部和秘書處各工作一年。為全面發展，大三上學期，我加入系文學社，參于了我系心韻雜志的創刊和編輯工作。在這些活動中鍛煉了我的領導和團隊協作能力，學會了

56、更好的與人相處，這些在我以后的工作中一定會有很大的幫助。計算機能力能熟悉使用office工具以及photoshop、flash等軟件。獲國家計算機二級等級資格證書。外語水平通過英語專業四級考試，能熟練進行聽說讀寫譯。獎勵情況：2007-2008 優秀學生會干部 200807 師生合唱比賽一等獎普通話水平測試等級證書英語專業四級證書自我評價x x x 個 人 簡 歷個人資料姓 名： 婚姻狀況：未婚出 生： 政治面貌：團員性 別： 民 族：漢學 位： 移動電話：專 業： 電子郵件：地 址：教育背景2006.9-2010.6吉林工程技術師范學院-外國語言文學系主修課程大學英語精讀，大學英語泛讀，英語

57、口語，英語聽力，英語寫作，英語口譯，翻譯學，詞匯學，語法學，英美概況，英國文學，美國文學，語言學，日語，中外名勝。能力及特長這要寫你明你有什么樣的能力及經驗，最重要就是告訴用人單位，你會做什么？計算機能力能熟悉使用office工具以及photoshop、flash等軟件。獲國家計算機二級等級資格證書。外語水平通過英語專業四級考試，能熟練進行聽說讀寫譯。獎勵情況2007-2008 優秀學生會干部 200807 師生合唱比賽一等獎普通話水平測試等級證書英語專業四級證書實習經驗（或?qū)嵺`經驗或兼職經驗）這里寫上你的實習經驗或?qū)嵺`經驗或兼職經驗等信息吧，標題自己起一個貼切的。自我評價本人性格開朗、穩重、

58、有活力，待人熱情、真誠。工作認真負責，積極主動，能吃苦耐勞。有較強的組織能力、實際動手能力和團體協作精神，能迅速的適應各種環境，并融入其中。我不是最優秀的，但我是最用功的；我不是太顯眼，但我很踏實；希望我的努力可以讓您滿意。這里不要照抄哦，不會寫自我評價的朋友，你可以訪問http 這里有很多自我評價范文可以參考。（按住鍵盤的ctrl鍵，再用鼠標點鏈接就可以直接打開網站，不用復制到瀏覽器的。）本人性格熱情開朗、待人真誠，善于溝通，應變能力較強。懂得珍惜擁有的一切。b內張型鼓式制動器c濕式多片制動器d浮鉗盤式制動器289.零配件市場上的主要價格形式（abc）a廠家指導價b市場零售價c配件廠價格290.油漆出險桔皮皺，