51單片機c語言電子鐘(已加入調時、鬧鈴、整點報時功能)

1、51單片機c語言電子鐘（已加入調時、鬧鈴、整點報時功能）效果圖：程序如下：/51單片機c語言電子鐘（已加入調時、鬧鈴、整點報時功能）/WHJWNAVY 2011/10/14#include#include#define uchar unsigned char#define uint unsigned int/*七段共陰管顯示定義*/ /此表為 LED 的字模, 共陰數碼管 0-9 - uchar code dispcode = 0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x40; /段碼控制/*定義并初始化變量*/uchar secon

2、de=0;/秒uchar minite=0;/分uchar hour=12; /時uchar mstcnt=0;/定時器計數，定時50ms，mstcnt滿20，秒加1uchar shi=0;/鬧鈴功能uchar fen=0;uchar bjcs;/報警次數sbit P1_0=P10; /second 調整定義sbit P1_1=P11; /minite調整定義sbit P1_2=P12; /hour調整定義sbit P1_5=P15;/整點報時sbit P1_3=P13;/鬧鈴功能，調整時間sbit P1_6=P16;/調整時sbit P1_7=P17;/調整分sbit P1_4=P14;/關

3、閉鬧鈴/*函數聲明*/void delay(uint k ); /延時子程序void time_pro( ); /時間處理子程序void display( ); /顯示子程序void keyscan( ); /鍵盤掃描子程序/*延時子程序*/void delay (uint k)uchar j;while(k-)!=0) for(j=0;j125;j+) ; /*時間處理子程序*/void time_pro(void)if(seconde=60)seconde=0;minite+;if(minite=60)minite=0;hour+;if(hour=24)hour=0;/*顯示子程序*/vo

4、id display(void)if(P1_3=1)P2=0XFE;P0=dispcodeseconde%10;/秒個位delay(1);P2=0XFD;P0=dispcodeseconde/10;/秒十位delay(1);P2=0XFB;P0=dispcode10;/間隔符 -delay(1);P2=0XF7;P0=dispcodeminite%10;/分個位delay(1);P2=0XEF;P0=dispcodeminite/10;/分十位delay(1);P2=0XDF;P0=dispcode10;/間隔符 -delay(1);P2=0XBF;P0=dispcodehour%10;/時個

5、位delay(1);P2=0X7F;P0=dispcodehour/10;/時十位delay(1);/*鍵盤掃描子程序*/void keyscan(void)if(P1_0=0)/秒位的調整delay(30);if(P1_0=0)seconde+;if(seconde=60)seconde=0;delay(250);if(P1_1=0)/分位的調整delay(30);if(P1_1=0)minite+;if(minite=60)minite=0;delay(250);if(P1_2=0)/時位的調整delay(30);if(P1_2=0)hour+;if(hour=24)hour=0;dela

6、y(250);/*整點報警*/void zhengdian (void)if(seconde=0)&(minite=0)/整點報時P1_5=0;delay(1000);P1_5=1;/*定時鬧鐘*/void dingshi(void)if(P1_3=0) /按住P1_3BU不松，顯示鬧鈴設置界面，分別按P1_6、P1_7設置鬧鈴時間。P2=0XFE;P0=dispcode0;/秒個位delay(1);P2=0XFD;P0=dispcode0;/秒十位delay(1);P2=0XFB;P0=dispcode10;/間隔符 -delay(1);P2=0XF7;P0=dispcodefen%10;/

7、分個位delay(1);P2=0XEF;P0=dispcodefen/10;/分十位delay(1);P2=0XDF;P0=dispcode10;/間隔符 -delay(1);P2=0XBF;P0=dispcodeshi%10;/時個位delay(1);P2=0X7F;P0=dispcodeshi/10;/時十位delay(1);if(P1_6=0)/設定時delay(30);if(P1_6=0)shi+;if(shi=24)shi=0;delay(250);if(P1_7=0)/設定分delay(30);if(P1_7=0)fen+;if(fen=60)fen=0;delay(250);if

8、(hour=shi)&(minite=fen)&(seconde=0)/鬧鈴時間到，報警十次。for(bjcs=0;bjcs10;bjcs+)P1_5=0;delay(500);P1_5=1;delay(500);/*主函數*/void main(void)P1=0XFF;TMOD = 0x11; /time0為定時器，方式1TH0=0x3c; /預置計數初值,50msTL0=0xb0;EA=1; /總中斷開ET0=1; /允許定時器0中斷TR0=1; /開啟定時器0 while (1) keyscan(); /按鍵掃描dingshi();/定時鬧鐘zhengdian();/整點報時display(); /顯示時間void timer0(void) interrupt 1 /定時器0方式1，50ms中斷一次 TH0=0x3c; /手動加載計數脈沖