【BS英國標準】BSEN602-2004Aluminiumandaluminiumalloys-Wroughtproducts-Chemicalcompositionofsemi-finishedproductsusedforthe.doc

國內外標準大全豆丁網國內外標準下載地址 /kmust1licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsibritish standard bs en602:2004aluminium and aluminium alloys wrought products chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuffthe european standard en 602:2004 has the status of abritish standardics 67.250; 77.150.10 bs en 602:2004national forewordthis british standard is the official english language version of en 602:2004. it supersedes bs en 602:1995 which is withdrawn.the uk participation in its preparation was entrusted by technical committee nfe/35, light metals and their alloys, to subcommittee nfe/35/5, wrought aluminium and aluminium alloys, which has the responsibility to:aid enquirers to understand the text;present to the responsible european committee any enquiries on the interpretation, or proposals for change, and keep the uk interests informed;monitor related international and european developments and promulgate them in the uk.a list of organizations represented on this subcommittee can be obtained on request to its secretary.cross-referencesthe british standards which implement international or european publications referred to in this document may be found in the bsi catalogue under the section entitled “international standards correspondence index”, or by using the “search” facility of the bsi electronic catalogue or ofbritish standards online.this publication does not purport to include all the necessary provisions of a contract. users are responsible for its correct application.compliance with a british standard does not of itself confer immunity from legal obligations.summary of pagesthis document comprises a front cover, an inside front cover, the en title page, pages 2 to 7 and a back cover.the bsi copyright notice displayed in this document indicates when the document was last issued.licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsiamd. no.datecommentsthis british standard was published under the authority of the standards policy and strategy committee on6 may 2004 bsi 6 may 2004isbn 0 580 43733 7amendments issued since publicationeuropean standard norme europenneeuropische normen 602april 2004ics 67.250; 77.150.10supersedes en 602:1994english versionaluminium and aluminium alloys - wrought products - chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuffaluminium et alliages daluminium - produits corroys - composition chimique des demi-produits utiliss pour la fabrication darticles destins entrer en contact avec les denres alimentairesaluminium und aluminiumlegierungen - kneterzeugnisse - chemische zusammensetzung von halbzeug fr die herstellung von erzeugnissen, die in kontakt mit lebensmitteln kommenthis european standard was approved by cen on 2 february 2004.cen members are bound to comply with the cen/cenelec internal regulations which stipulate the conditions for giving this european standard the status of a national standard without any alteration. up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the central secretariat or to any cen member.this european standard exists in three official versions (english, french, german). a version in any other language made by translation under the responsibility of a cen member into its own language and notified to the central secretariat has the same status as the official versions.cen members are the national standards bodies of austria, belgium, cyprus, czech republic, denmark, estonia, finland, france, germany, greece, hungary, iceland, ireland, italy, latvia, lithuania, luxembourg, malta, netherlands, norway, poland, portugal, slovakia, slovenia, spain, sweden, switzerland and united kingdom.european committee for standardization c o m i t eur o p en de nor m a l i s a ti on eur o p i s c h es kom i tee f r nor m ung management centre: rue de stassart, 36 b-1050 brusselslicensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsi 2004 cenall rights of exploitation in any form and by any means reserved worldwide for cen national members.ref. no. en 602:2004: een 602:2004 (e)licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsicontentsforeword .31scope .42normative references .43terms and definitions.44maximum permissible content of elements for foodstuff application.54.1wrought aluminium .54.2wrought aluminium alloys .55selection of wrought aluminium and wrought aluminium alloys .66demonstration of conformity with the present standard .67licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsiforewordthis document (en 602:2004) has been prepared by technical committee cen/tc 132 “aluminium and aluminium alloys”, the secretariat of which is held by afnor.this european standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by october 2004 and conflicting national standards shall be withdrawn at the latest by october 2004.within its programme of work, technical committee cen/tc 132 has entrusted cen/tc 132/wg 9 aluminium and aluminium alloy cast and wrought products in contact with food to prepare a revision of the following standard :en 602, aluminium and aluminium alloys wrought products chemical composition of semi-finished products used for the fabrication of articles for use in contact with food.this revision consists mainly in the addition of a new clause 6. this document supersedes en 602:1994.according to the cen/cenelec internal regulations, the national standards organizations of the following countries are bound to implement this european standard: austria, belgium, cyprus, czech republic, denmark, estonia, finland, france, germany, greece, hungary, iceland, ireland, italy, latvia, lithuania, luxembourg, malta, netherlands, norway, poland, portugal, slovakia, slovenia, spain, sweden, switzerland and united kingdom.licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsi1scopethis european standard specifies the maximum percentage content of alloying elements and impurities present in wrought aluminium and aluminium alloys which are fabricated into materials and articles designed to be in contact with foodstuff. it contains provisions for the demonstration of conformity of products with the present standard.note 1materials include semi-finished products. articles are finished goods.note 2some of the products listed in the present standard can be subject to patent or patent applications, and their listing herein does not in anyway imply the granting of a licence under such patent right.cen/tc 132 affirms it is its policy that in the case when a patentee refuses to grand licenses on standardized standard products under reasonable and not discriminatory conditions, then this product shall be removed from the corresponding standard.2normative referencesthis european standard incorporates by dated or undated reference, provisions from other publications. these normative references are cited at the appropriate places in the text, and the publications are listed hereafter. for dated references, subsequent amendments to or revisions of any of these publications apply to this european standard only when incorporated in it by amendment or revision. for undated references the latest edition of the publication referred to applies (including amendments).en 573-3, aluminium and aluminium alloys chemical composition and form of wrought products part 3: chemical composition.en 10204:1991, metallic products types of inspection documents.en 12258-1:1998, aluminium and aluminium alloys terms and definitions part 1: general terms.3terms and definitionsfor the purposes of this european standard, the terms and definitions given in en 12258-1:1998 and the following apply.3.1 aluminiummetal with a minimum content of 99,0 % by mass of aluminium, provided that the content by mass of any other element does not exceed the limit specified in table 1licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsitable 1 aluminium other elementselementmaximum content% (by mass)iron + silicon1,0copper0,10 (if cr and / or mn 0,05)0,20 (if cr 0,05 and mn 0,05)other elementsa each0,10aother elements are for example, cr, mg, mn, ni, zn.3.2aluminium alloymetallic substance in which aluminium predominates by mass over each of the other elements, provided that :a)the content by mass of at least one of the other elements, or iron plus silicon taken together, is greater than the limits specified in table 1 ; orb)the total content by mass of such other elements exceeds 1,0 %3.3wrought productproduct obtained by hot and/or cold working processes such as extruding, forging, hot rolling, cold rolling or drawing, either exclusively or in combination. examples for wrought products are rod/bar, wire, tube, profile, sheet, strip, forging4maximum permissible content of elements for foodstuff application4.1wrought aluminiumthe content by mass of the other elements which are present in wrought aluminium shall not exceed the following limits : iron + silicon 1,0 % ; chromium, magnesium, manganese, nickel, zinc, titanium, tin 0,10 % each ; copper 0,1 %. copper is permitted in a proportion greater than 0,10 % but not more than 0,20 % and provided that neither the chromium nor manganese content exceeds 0,05 % ; other elements 0,05 % each.4.2wrought aluminium alloysthe content by mass of the elements which are added to form wrought aluminium alloys or which are present as impurities, shall not exceed the maximum values given in table 2.licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsitable 2 aluminium alloys maximum content of elementselementmaximum content% (by mass)silicon iron coppermanganese magnesiuma chromium nickelzinc zirconium titaniumother elementsb13,52,00,64,011,00,353,00,250,30,30,05 each0,15 in totalaalloys containing more than 5 % magnesium shall not be used for the production of pressure resisting parts in pressure cooking applications.bfor some alloying elements (e.g. ag) as mentioned under other elements the maximum content is limited at 0,05 % because of insufficient knowledge about behaviour in contact with food. higher limits may be introduced when more information is available.5selection of wrought aluminium and wrought aluminium alloysthe wrought aluminium and wrought aluminium alloys which shall be used for the fabrication of articles for use in contact with foodstuff are those which conform with the requirements in 4.1 or 4.2 as applicable.for every use of a standardised wrought aluminium or wrought aluminium alloy for the fabrication of articles for use in contact with foodstuff, the conformity with this european standard shall be established by checking the maximum contents specified in en 573-3 against the requirements in 4.1 or 4.2 as applicable.noteit is strongly recommended to use standardised wrought aluminium or wrought aluminium alloys.the selection of the wrought aluminium or wrought aluminium alloy for a given application shall be the responsibility of the end product manufacturer, depending on the intended final use.6demonstration of conformity with the present standardthe manufacture of wrought products used for the fabrication of articles for use in contact with food shall be carried out in the framework of a quality assurance system. within this quality assurance system, the manufacturer shall maintain a procedure to control the requirements of the present standard (see clause 4). special attention shall be given to : the qualification of raw materials entering into the formulation of the products ; and to traceabillity of delivered products to the measurement of chemical composition of the materials used(see clause 5).notethe qualification of raw materials can be based either on actual measurements done by the producer or on certificates of conformity obtained from the supplier of said raw material.licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsithe manufacturer shall establish an inspection certificate 3.1 according to en 10204:1991, which certify compliance of the delivered products with the requirements of the present standard. unless otherwise agreed upon between manufacturer and purchaser, this certificate can be issued at the discretion of the manufacturer either for each delivered lot or shipment, or periodically for all products delivered under the present standard within a period of time not exceeding twelve months.licensed copy: institute of technology tallaght, institute of technology, tue nov 14 09:53:57 gmt+00:00 2006, uncontrolled copy, (c) bsibs en 602:2004bsi389 chiswick high roadlondonw4 4albsi british standards institutionbsi is the independent national body responsible for preparingbritish standards. it presents the uk view on standards in europe and at the international level. it is incorporated by royal charter.revisionsbritish standards are updated by amendment or revision. users ofbritish standards should make sure that they possess the latest amendments or editions.it is the constant aim of bsi to improve the quality of our products and services. we would be grateful if anyone finding an inaccuracy or ambiguity while using this british standard would inform the secretary of the technical committee responsible, the identity of which can be found on the inside front cover.tel: +44 (0)20 8996 9000. fax: +44 (0)20 8996 7400.bsi offers members an individual updating service called plus which ensures that subscribers automatically receive the latest editions of standards.buying standardsorders for all bsi, international and foreign standards publications should be addressed to customer services. tel: +44 (0)20 8996 9001.fax: +44 (0)20 8996 7001. email: . standards are alsoavailable from the bsi website at .in response to orders for international standards, it is bsi policy to supply the bsi implementation of those that have been published as british standards, unless otherwise requested.information on standardsbsi provides a wide range of information on national, european and international standards through its library and it