大學英語四級考試流程及詳細分?jǐn)?shù)分布

1、大學英語四級考試流程:8:509:00 試音時間9:009:10 播放考場指令，發放作文考卷9:10 取下耳機，開始作文考試9:35 發放含有快速閱讀的試題冊(但9:40才允許開始做)9:409:55 做快速閱讀 (15分鐘)9:5510:00 收答題卡一(即作文和快速閱讀)9:5510:00 重新戴上耳機，試音尋臺，準備聽力考試10:00 開始聽力考試，電臺開始放音聽力結束后完成剩余考項。11:20全部考試結束。新題型英語四級各題詳細分值1.作文:15,，合106.5分;2.快速閱讀:10,合71分，每個7.1分; 10個3.聽力客觀題(單選):25,合177.5分每個7.1分; 4.聽力主

2、觀題(復合式聽寫):10,合71分，前八個每個3.55分共28.4分，后三個每個14.2分，共42.6分; (共11個) 5.閱讀短句問答:10%合71分，每個14.2分; 5個6.仔細閱讀理解:15,合106.5分，共10個每個10.65分。 7.完形填空:10,合71分，共20個每個3.55分。 8.句子翻譯:5,合35.5分，共5個，每個7.1分。 the oil level to the normal oil level. (2)for the secondary prevention of the leakage of cooling water pipefittings, valv

3、e parts before installation to check . 4.2 measures toeliminate quality defects of cables cable laying in front of the cableconstruction, design, supervision and construction units to deliver thedesign, and drawing the third. Combined the engineering field to findfault, adding omitted items. Because

4、 the unit used computer DCS controland adds a great deal of control and signal cables. So you shouldcarefully review, checks for missing physical cable, ready forconstruction and to verify cable length, specifications, familiar withthe cable channel and the device location and bracket cable bracket

5、onthe section number. At the time of preparation of the inventory of cable,first of all, the professional carefully study electrical schematics, inaccordance with the principle of accounting the cable path cable volume,the number of cores used, total volume and design inventory check cableto cable w

6、ith and without omission, laying of the cable in order toensure the process does not put a cable one cable. Finally, at the timeof inventory, prepared to take the same path the cables together.Inventory preparation is completed, later in each enclosure affixed onboth sides of each side of the cable

7、you want to lay accurately verifycable lengths and set aside. Bridge should be combined, correctingerrors, avoid straight, no cable bridge scaffolding used in theconstruction, not allowed to use electricity (fire) cutting, fix cabletray, cable tray is not allowed as a welding ground connection or ca

8、bletray cannot be used for other processes9.加起來總計:100,合710分。1.作文分?jǐn)?shù)占總分的15%，也就是106.5分，在這部分你要達到63.9分為及格。答題時間為30分鐘。2.快速閱讀占總分的10%，即71分，在這部分你要達到42.6分為及格分。題號為1-10題，答題時間為15分鐘。3.聽力部分占總分的35%，即248.5分，在這部分的及格分為149.1分。題號為11-35題，答題時間為35分鐘。4.是一篇篇章詞匯理解和兩篇傳統的閱讀理解，總分?jǐn)?shù)為177.5分。在這部分你要達到106.5分為及格分。題好為36-66。答題時間為25分鐘。5.是完

9、形填空(或改錯)，占總分的10%，即71分，在這部分你要達到42.6分及格。題號67-86，答題時間為15分鐘。 6.翻譯，漢譯英并且需譯部分只是一般的短句翻譯。占總分的5%，即35.5分，在這部分你要達到21.3分為及格，題號為87-91，答題時間是15分鐘四級聽力題目構成與比例小對話: 8% 選擇題 共8段小對話，8道題 ，放音一遍長對話: 7% 選擇題 共2段長對話，7道題，放音一遍(短文聽力: 10% 選擇題 共3篇文章，10道題，放音一遍)復合式聽寫:10% 聽寫填空 填8個單詞和3句話，放音三遍聽力位于考試的卷二部分，共占全卷35%the oil level to the norm

10、al oil level. (2) for the secondaryprevention of the leakage of cooling water pipe fittings, valve partsbefore installation to check . 4.2 measures to eliminate qualitydefects of cables cable laying in front of the cable construction,design, supervision and construction units to deliver the design,

11、anddrawing the third. Combined the engineering field to find fault, addingomitted items. Because the unit used computer DCS control and adds agreat deal of control and signal cables. So you should carefully review,checks for missing physical cable, ready for construction and to verifycable length, s

12、pecifications, familiar with the cable channel and thedevice location and bracket cable bracket on the section number. At thetime of preparation of the inventory of cable, first of all, theprofessional carefully study electrical schematics, in accordance withthe principle of accounting the cable pat

13、h cable volume, the number ofcores used, total volume and design inventory check cable to cable withand without omission, laying of the cable in order to ensure the processdoes not put a cable one cable. Finally, at the time of inventory,prepared to take the same path the cables together. Inventoryp

14、reparation is completed, later in each enclosure affixed on both sidesof each side of the cable you want to lay accurately verify cablelengths and set aside. Bridge should be combined, correcting errors,avoid straight, no cable bridge scaffolding used in the construction,not allowed to use electrici

15、ty (fire) cutting, fix cable tray, cabletray is not allowed as a welding ground connection or cable tray cannotbe used for other processesCET4考試流程時間 項目 說明開始入憑準考證、身份證，檢查準考證上的考場號8:45 場 是否與本考場相符，不攜帶違規物品入場。遲到考生禁止入場。發答題卡1和答題卡2。只能用黑色字跡簽入場結9:00 字筆在答題卡上填寫姓名、準考證號，用束 2B鉛筆涂黑相應的信息點。暫不填寫答題卡2上試卷代號一欄。不能提前答題?？荚囌介_始

16、?？忌鲈囶}的第一部分，即考試開9:10 寫作部分(用黑色字跡簽字筆答題)?？荚囀?全程，考生不得提前退場。監考員發試題冊。將試題冊背面向上放到考發試題生桌子左上角，并要求考生不得提前翻閱或9:35 冊 改變?cè)嚲砦恢?，否則按違規違紀處理?？忌荒芴崆胺喸囶}冊。寫作部分考試結束。考生打開試題冊，開始寫作結做試題的第二部分，即快速閱讀理解部分， 9:40 束 15分鐘后(即9:55)結束快速閱讀理解部分的答題。收答題收答題卡1。收卷期間考生不得答題，否則9:55 卡1作違規違紀處理。聽力考試正式開始。監考員播放聽力磁帶。注:考試聽力磁帶AB雙面都有內容。A面內容播放完后將有提示語，提示監考教師將

17、磁帶手動轉換到B面，請不要使用錄音機的聽力考10:00 自動翻面功能。提示語為:“A面內容已結試開始 束，請監考教師聽到嘀的一聲后，手動將磁帶轉換到B面繼續播放”。聽力考試結束后，考生開始做試題的第四部分。離考試結束還有十分鐘，將試題冊封面上的填寫試11:10 試卷代號填涂在答題卡2上試卷代號一卷代號 欄?？荚嚱Y(jié)束，立即停止答題。監考員驗收各考生試題冊和答題卡2，清點考試結11:20 無誤后，組織考生退場(嚴禁考生帶走試題束 冊和答題卡)。違規違紀考生在登記表上簽字確認。the oil level to the normal oil level. (2) for the secondarypr

18、evention of the leakage of cooling water pipe fittings, valve partsbefore installation to check . 4.2 measures to eliminate qualitydefects of cables cable laying in front of the cable construction,design, supervision and construction units to deliver the design, anddrawing the third. Combined the en

19、gineering field to find fault, addingomitted items. Because the unit used computer DCS control and adds agreat deal of control and signal cables. So you should carefully review,checks for missing physical cable, ready for construction and to verifycable length, specifications, familiar with the cabl

20、e channel and thedevice location and bracket cable bracket on the section number. At thetime of preparation of the inventory of cable, first of all, theprofessional carefully study electrical schematics, in accordance withthe principle of accounting the cable path cable volume, the number ofcores us

21、ed, total volume and design inventory check cable to cable withand without omission, laying of the cable in order to ensure the processdoes not put a cable one cable. Finally, at the time of inventory,prepared to take the same path the cables together. Inventorypreparation is completed, later in eac

22、h enclosure affixed on both sidesof each side of the cable you want to lay accurately verify cablelengths and set aside. Bridge should be combined, correcting errors,avoid straight, no cable bridge scaffolding used in the construction,not allowed to use electricity (fire) cutting, fix cable tray, ca

23、bletray is not allowed as a welding ground connection or cable tray cannotbe used for other processes題型 分值 所占比例 題數每小題分?jǐn)?shù)寫作 106.5分 15% 1題106.5分/題快速閱讀 71分10% 10題7.1分/題 聽 客觀題 177.5分 25% 25題(單選) 7.1分/題 力 主觀題 前8題28.4分 8題(復合10% 3.55分式聽寫) /題后3題42.6分 3題14.2/題選詞填空 71分10% 10題7.1分/題閱讀理解 106.5分 15% 10題the oil le

24、vel to the normal oil level. (2) for the secondaryprevention of the leakage of cooling water pipe fittings, valve partsbefore installation to check . 4.2 measures to eliminate qualitydefects of cables cable laying in front of the cable construction,design, supervision and construction units to deliv

25、er the design, anddrawing the third. Combined the engineering field to find fault, addingomitted items. Because the unit used computer DCS control and adds agreat deal of control and signal cables. So you should carefully review,checks for missing physical cable, ready for construction and to verify

26、cable length, specifications, familiar with the cable channel and thedevice location and bracket cable bracket on the section number. At thetime of preparation of the inventory of cable, first of all, theprofessional carefully study electrical schematics, in accordance withthe principle of accountin

27、g the cable path cable volume, the number ofcores used, total volume and design inventory check cable to cable withand without omission, laying of the cable in order to ensure the processdoes not put a cable one cable. Finally, at the time of inventory,prepared to take the same path the cables toget

28、her. Inventorypreparation is completed, later in each enclosure affixed on both sidesof each side of the cable you want to lay accurately verify cablelengths and set aside. Bridge should be combined, correcting errors,avoid straight, no cable bridge scaffolding used in the construction,not allowed t

29、o use electricity (fire) cutting, fix cable tray, cabletray is not allowed as a welding ground connection or cable tray cannotbe used for other processes10.65分/題完形填空 71分10% 20題3.55分/題句子翻譯 35.5分 5% 5題7.1分/題總計 710分 100% 共92題樣卷答題試題內容 答題卡 結構 時間Part 30WritingI minutes AnswerSheet 1 Part Reading Comprehen

30、sion(Skimming 15II and Scanning) minutes the oil level to the normal oil level. (2)for the secondary prevention of the leakage of cooling water pipefittings, valve parts before installation to check . 4.2 measures toeliminate quality defects of cables cable laying in front of the cableconstruction,

31、design, supervision and construction units to deliver thedesign, and drawing the third. Combined the engineering field to findfault, adding omitted items. Because the unit used computer DCS controland adds a great deal of control and signal cables. So you shouldcarefully review, checks for missing p

32、hysical cable, ready forconstruction and to verify cable length, specifications, familiar withthe cable channel and the device location and bracket cable bracket onthe section number. At the time of preparation of the inventory of cable,first of all, the professional carefully study electrical schem

33、atics, inaccordance with the principle of accounting the cable path cable volume,the number of cores used, total volume and design inventory check cableto cable with and without omission, laying of the cable in order toensure the process does not put a cable one cable. Finally, at the timeof invento

34、ry, prepared to take the same path the cables together.Inventory preparation is completed, later in each enclosure affixed onboth sides of each side of the cable you want to lay accurately verifycable lengths and set aside. Bridge should be combined, correctingerrors, avoid straight, no cable bridge

35、 scaffolding used in theconstruction, not allowed to use electricity (fire) cutting, fix cabletray, cable tray is not allowed as a welding ground connection or cabletray cannot be used for other processesPart 35Listening ComprehensionIII minutes Part Reading Comprehension(Reading 25 IV in Depth)minu

36、tes AnswerSheet 2 Part 15ClozeV minutes Part 5TranslationVI minutesthe oil level to the normal oil level. (2) for the secondaryprevention of the leakage of cooling water pipe fittings, valve partsbefore installation to check . 4.2 measures to eliminate qualitydefects of cables cable laying in front of the cable construction,design, supervision and construction units to deliver the design, anddrawing the third. Combined the engineering field to find fault, addingomitted items. Because the unit used comp