纏繞制品的標準和檢測

1、纏繞制品的標準和檢測1美國復合材料標準1.1 概況在纖維增強塑料（復合材料）領域，ASTM標準化水平最高，ASTM的D30委員會（復合材料）、ASTM的D20委員會（塑料）中的D20.18（增強熱固性塑料）、ASTM的D20委員會（塑料）中的D20.23（增強塑料管和耐化學設備）開展纖維增強塑料（復合材料）標準化工作。ASTM的D30委員會已制定了75項試驗方法標準，有6項標準正在制定；ASTM的D20委員會中的D20.18已制定了18項標準；ASTM的D20委員會中的D20.23已制定了35項標準，有4項標準正在制定。 ASTM的試驗方法標準幾乎完全覆蓋當今復合材料的性能表征和測試，絕大多數

2、為全球最先發布，得到全世界的普遍認可和采用。ASTM的產品標準以管道、貯罐、拉擠型材為主，產品標準側重于結構設計、原材料和工藝控制，較好地體現復合材料制造的特殊過程，比較科學合理。 在美國，除ASTM外，其他的協會、學會也發布所使用的復合材料產品標準，并具有很高的權威性，如美國石油學會（API）、美國水行業協會。1.2 ASTM（美國材料試驗學會）19世紀80年代，為解決采購商與供貨商在購銷工業材料過程中產生的意見和分歧，有人提出建立技術委員會制度，由技術委員會組織各方面的代表參加技術座談會，討論解決有關材料規范、試驗程序等方面的爭議問題。1902年美國材料試驗學會（American Soci

3、ety for Testing Materials）成立。隨著其業務范圍的不斷擴大和發展，學會的工作中心不僅僅是研究和制定材料規范和試驗方法標準，還包括各種材料、產品、系統、服務項目的特點和性能標準，以及試驗方法、程序等標準。1961年該組織又將其名稱改為延用至今的美國材料與試驗學會（American Society for Testing and Materials, ASTM）。 ASTM是美國最老、最大的非盈利性的標準學術團體之一。經過一個世紀的發展，ASTM現有33669個（個人和團體）會員，其中有22396個主要委員會會員在其各個委員會中擔任技術專家工作。ASTM的技術委員會下共設有

4、2004個技術分委員會。有105817個單位參加了ASTM標準的制定工作，主要任務是制定材料、產品、系統、和服務等領域的特性和性能標準、試驗方法和程序標準，促進有關知識的發展和推廣。ASTM的D20委員會（塑料）中的D20.23（增強塑料管和耐化學設備）已制定的與纏繞制品相關的標準有：序號標準名稱1D2105-01(2007) Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe an

5、d Tube玻璃纖維（玻璃纖維增強熱固樹脂）管軸向拉伸性能的標準試驗方法2D2143-00(2010) Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe增強熱固塑料管循環壓力的標準試驗方法3D2310-06 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe機械制造的玻璃纖維（玻璃纖維增強

6、熱固性樹脂）管的標準分類4D2517-06 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings增強環氧樹脂氣體壓力管及配件的規范5D2924-01(2006) Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe玻璃纖維（玻璃纖維增強熱固性樹脂）管耐外壓的標準試驗方法6D2925-0

7、1(2007) Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow玻璃纖維（玻璃纖維增強熱固性樹脂）管在允滿流體下?lián)锨鹊臉?biāo)準試驗方法7D2992-06 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for "Fiberglass" (Glass-Fiber-Re

8、inforced Thermosetting-Resin) Pipe and Fittings獲得玻璃纖維（玻璃纖維增強熱固性樹脂管）管和管件液體靜壓設計基數的標準規程8D2996-01(2007) Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe纖維纏繞纖維玻璃（玻璃纖維增強熱固樹脂）管的標準規范9D2997-01(2007)e1 Standard Specification for Centrifugally C

9、ast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe離心鑄造玻璃纖維（玻璃纖維增強熱固樹脂）管的標準規范10D3262-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe玻璃纖維（玻璃纖維增強熱固樹脂）污水管的標準規范11D3299-10 Standard Specification for Filament-Wound Glass

10、-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks纖維纏繞玻璃纖維增強熱固樹脂耐化學貯罐的標準規范12D3517-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe玻璃纖維（玻璃纖維增強熱固樹脂）壓力管的標準規范13D3567-97(2006) Standard Practice for Determining Dimensions of "Fib

11、erglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings玻璃纖維（玻璃纖維增強熱固性樹脂）管及管件尺寸測量的標準規程14D3681-06 Standard Test Method for Chemical Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe in a Deflected Condition玻璃纖維（玻璃纖維增強熱固樹脂）管在變形下耐化學腐蝕的標準試驗方法15D37

12、53-05e1 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells玻璃纖維增強聚酯檢查井的標準規范16D3754-06 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe玻璃纖維(增強熱固性樹脂)污水和工業壓力管的標準規范17D3839-08 Standard Guide for

13、 Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe 玻璃纖維（玻璃纖維增強熱固樹脂）管地下安裝指南18D3840-10 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications玻璃纖維（玻璃纖維增強熱固性樹脂）無壓管管件的標準規范19D4024-05

14、Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges機制玻璃纖維（玻璃纖維增強熱固性樹脂）法蘭的標準規范20D4161-01(2010) Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals采用柔

15、性彈性密封的玻璃纖維（玻璃纖維增強熱固樹脂）管接頭的標準規范21D5364-08e1 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units燃煤機組用玻璃纖維增強塑料煙囪內襯的設計、制造和安裝的標準指南22D5365-06 Standard Test Method for Long-Term Ring-Bending Strain of "Fiberglass" (Glass-Fiber

16、-Reinforced Thermosetting-Resin) Pipe玻璃纖維(玻璃纖維增強熱固樹脂)管長期環彎曲應變的標準試驗方法23D5677-05(2010) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines粘接連接型，玻璃纖維（玻璃纖維增強熱固性樹脂）航空噴氣渦輪機燃料管和管件的標準規范24D5

17、685-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings玻璃纖維(玻璃纖維增強熱固性樹脂)壓力管管件的標準規范1.3 API（美國石油學會）API是ANSI認可的標準制定機構，自1924年發布第1個標準開始，API現在已發布了500個標準。API在美國國內以及在世界其他國家都享有很高的聲望，它是美國商業部和美國貿易委員會承認的石油機械認證機構。它所制定的石油化工和采油機械技術標準被許多國家采用，中東、南美

18、和亞洲許多國家的石油公司在招標采購石油機械時，一般都要求佩有API標志的產品才能有資格參加投標。因此，擁有API標志的石油機械設備不僅被認為是質量可靠而且具有先進水平。已制定的復合材料產品相關標準有：序號標準名稱1API Spec 15HR High Pressure Fiberglass Line Pipe高壓玻璃纖維線管（機械連接，3.5MPa34.5 MPa）2API Spec 15LR Low Pressure Fiberglass Line Pipe低壓玻璃纖維線管（不大于24in，2.17.0MPa）3API Spec RP 15TL4 Care and Use of Fiberg

19、lass Tubulars玻璃纖維管的維護與使用推薦方法4API RP 15S Qualification of Spoolable Reinforced Plastics Line Pipe可繞式增強塑料管的質量評定1.4 AWWA（美國水行業協會）AWWA成立于1881年，是安全用水方面的權威機構。已制定的復合材料產品相關標準有：序號標準名稱1AWWA C950   Fiberglass Pressure Pipe玻璃纖維壓力管2AWWAD120   Thermosetting Fiberglass Reinforced Plas

20、tic Tanks玻璃增強熱固性塑料貯罐2 國際標準（ISO）國際標準化組織（International Organization for Standardization）簡稱ISO，是世界上最大的非政府性標準化專門機構，是國際標準化領域中一個十分重要的組織。ISO的任務是促進全球范圍內的標準化及其有關活動，以利于國際間產品與服務的交流，以及在知識、科學、技術和經濟活動中發展國際間的相互合作。它顯示了強大的生命力，吸引了越來越多的國家參與其活動。在國際標準化組織方面，有二個分技術委員會開展復合材料領域的標準化工作。一是ISO/TC61/SC13（復合材料和增強纖維分技術委員會），TC61/SC

21、13為TC61（塑料）下的一個分技術委員會，負責復合材料和增強纖維標準化工作。ISO/TC61/SC13共發布了44項復合材料材料標準，其中有2項半成品標準（片裝模塑料SMC和團裝模塑料），1項基礎標準，其他均為試驗方法標準。ISO的試驗方法標準的技術內容與ASTM標準和我國標準基本相同，但發布時間遠遠落后于ASTM標準和我國標準。ISO/TC138/SC6（增強塑料管和管件分技術委員會）共發布了29項管道和管件的相關標準。第二個是ISO/TC138/SC6，TC138/SC6為TC138（液體輸送用塑料管、管件和閥門）下的一個分技術委員會，負責增強塑料管和管件的標準化工作。ISO/TC138

22、和ISO/TC61達成協議，塑料管、管件和閥門相關標準均由ISO/TC138負責。TC138/SC6已制定的標準有：序號標準名稱1ISO 7432:2002 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals玻璃增強熱固塑料(GRP)管和管件驗證帶彈性密封件的剛性鎖緊插

23、承接頭設計的試驗方法2ISO 7509:2000 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of time to failure under sustained internal pressure塑料管系統玻璃增強熱固性塑料管持續內壓下失效時間的測定33ISO 7510:1997 Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination o

24、f the amounts of constituents using the gravimetric method塑料管系統玻璃增強塑料組件用重量分析法測定組份含量44ISO 7511:1999 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal pressure塑料管系統玻璃增強熱固性塑料管和管件短時內壓

25、下管壁水密性試驗方法55ISO 7684:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the creep factor under dry conditions塑料管系統玻璃增強熱固性塑料管干態下蠕變系數的測定66ISO 7685:1998 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of in

26、itial specific ring stiffness塑料管系統玻璃增強熱固性塑料管初始環剛度的測定77ISO 8483:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of bolted flange joints玻璃增強熱固性塑料管和管件驗證法蘭螺栓連接設計的試驗方法89ISO 8513:2000 Plastics piping systems - Glass-reinforced thermosetting plastics

27、 (GRP) pipes - Determination of longitudinal tensile properties塑料管系統玻璃增強熱固性塑料管軸向拉伸性能的測定912ISO 8521:2009 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test methods for the determination of the apparent initial circumferential tensile strength塑料管系統玻璃增強熱固性塑料管測定表觀初始環向拉伸

28、強度的試驗方法1013ISO 8533:2003 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the design of cemented or wrapped joints玻璃增強熱固性塑料管和管件驗證粘接和包纏接頭設計的試驗方法1116ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness o

29、f flexible joints玻璃增強熱固性塑料管和管件柔性接頭水密性試驗方法1216ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness of flexible joints玻璃增強熱固性塑料管和管件柔性接頭水密性試驗方法1316ISO 8639:2000 Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for

30、 leaktightness of flexible joints玻璃增強熱固性塑料管和管件柔性接頭密封性試驗方法1417ISO/TS 10465-1:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 1: Installation procedures玻璃增強聚酯樹脂柔性管地下安裝第1部分：安裝程序1519ISO/TR 10465-2:2007 Underground installation of flex

31、ible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 2: Comparison of static calculation methods玻璃增強聚酯樹脂柔性管地下安裝第2部分：統計計算方法的對比1621ISO/TR 10465-3:2007 Underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP) - Part 3: Install

32、ation parameters and application limits玻璃增強聚酯樹脂柔性管地下安裝第3部分：施工參數和應用限制1723ISO 10466:1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring deflection塑料管系統玻璃增強熱固性塑料管驗證耐初始環向變形的試驗方法1824ISO 10467:2004 Plastics piping systems

33、 for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin壓力和無壓排水、污水塑料管系統以不飽和聚酯樹脂為基體的玻璃增強熱固性塑料管系統1926ISO 10468:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specifi

34、c ring creep stiffness under wet conditions and calculation of the wet creep factor玻璃增強熱固性塑料管濕態環境下長期環向蠕變的測定以及濕態蠕變系數的計算2028ISO 10471:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate bending strain and the long-term ultimate relative ring deflection un

35、der wet conditions玻璃增強熱固性塑料管濕態環境下長期極限彎曲應變和對應的長期環變形的測定2130ISO 10639:2004 Plastics piping systems for pressure and non-pressure water supply - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin壓力和無壓供水塑料管系統以不飽和聚酯樹脂為基體的玻璃增強熱固性塑料管系統2232ISO 10928:2009 Plastics

36、piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use塑料管系統玻璃增強熱固性塑料管和管件回歸分析及應用2335ISO 10952:2008 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to

37、 chemical attack for the inside of a section in a deflected condition塑料管系統玻璃增強熱固性塑料管和管件變形下耐化學腐蝕的測定2438ISO 14828:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term specific ring relaxation stiffness under wet conditions and calculation of the wet relaxation fact

38、or玻璃增強熱固性塑料管濕態環境下長期環剛度的測定以及濕態衰減系數的計算2540ISO 15306:2003 Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the resistance to cyclic internal pressure玻璃增強熱固性塑料管循環內壓的測定2643ISO 18672-1:2009 Plastics piping systems for non-pressure drainage and sewerage - Polyester resin concrete (PRC

39、) - Part 1: Pipes and fittings with flexible joints壓力和無壓排水、污水塑料管系統聚酯樹脂混泥土柔性連接的管和管件2744ISO 25780:2011 Plastics piping systems for pressure and non-pressure water supply, irrigation, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

40、- Pipes with flexible joints intended to be installed using jacking techniques供水、罐溉、排水、污水用壓力和無壓塑料管系統以不飽和聚酯樹脂為基體的玻璃增強熱固性塑料管系統頂進施工柔性接頭管3歐盟標準序號標準名稱1EN 1115-1-1997 Plastics piping systems for underground drainage and sewerage under pressure - Glass-reinforced thermosetting plastics (GRP) based on unsatu

41、rated polyester resin (UP) - Part 1: General地下排水和污水壓力塑料管道系統 基于不飽和聚酯樹脂的玻璃增強熱固性塑料（GRP） 第1部分：通則2EN 1115-3-1996 Plastics piping systems for underground drainage and sewerage under pressure - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 3: Fittings地下排水和污水壓

42、力塑料管道系統 基于不飽和聚酯樹脂的玻璃增強熱固性塑料（GRP） 第3部分：管件3EN 1115-5-1996 Plastics piping systems for underground drainage and sewerage under pressure - Glassreinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for purpose of the joints地下排水和污水壓力塑料管道系統 基于不飽和聚酯樹脂的玻璃增強熱固性塑料

43、（GRP） 第5部分：接頭適用性4EN 1119-1996 Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of flexible and reduced-articulation joints塑料管系統 玻璃增強熱固塑料管和管件用接頭 柔性接頭密封性和耐損傷性試驗方法5EN 1120-1996 Plastics piping

44、 systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Determination of the resistance to chemical attack from the inside of a section in a deflected condition塑料管系統 玻璃增強熱固塑料管和管件 變形下耐化學腐蝕的測定6EN 1225-1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pi

45、pes - Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness塑料管系統 玻璃增強熱固性塑料管 濕態下蠕變系數的測定和長期環剛度的計算7EN 1226-1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method to prove the resistance to initial ring d

46、eflection塑料管系統 玻璃增強熱固性塑料管 證實耐初始環變形的試驗方法8EN 1227-1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the long-term ultimate relative ring deflection under wet conditions塑料管系統 玻璃增強熱固性塑料管 濕態下長期環變形的測定9EN 1228-1996 Plastics piping systems - Glass-reinforc

47、ed thermosetting plastics (GRP) pipes - Determination of initial specific ring stiffness塑料管系統 玻璃增強熱固性塑料管 初始環剛度的測定10EN 1229-1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods to prove the leaktightness of the wall under short-term internal p

48、ressure塑料管系統 玻璃增強熱固性塑料管和管件 驗證短期內壓下管壁密封性試驗方法11EN 1393-1996+AC-1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of initial longitudinal tensile properties塑料管系統 玻璃增強熱固性塑料(GRP)管 初始軸向拉伸性能的測定12EN 1394-1996+AC-1997 Plastics piping systems - Glass-reinforced

49、 thermosetting plastics (GRP) pipes - Determination of the apparent initial circumferential tensile strength塑料管系統 玻璃增強熱固性塑料(GRP)管 表觀初始環向拉伸強度的測定13EN 1447-1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure塑料管系

50、統 玻璃增強熱固性塑料管 (GRP) 長期內壓的測定14EN 1448-1996 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of rigid locked socket-and-spigot joints with elastomeric seals塑料管系統 玻璃增強熱固塑料(GRP)組件驗證帶彈性密封件的剛性鎖緊插承接頭設計的試驗方法15EN 1450-1996+A1-1998 Plastics p

51、iping systems - Glass-reinforced thermosetting plastics (GRP) components - Test methods to prove the design of bolted flange joints塑料管系統 玻璃增強熱固塑料(GRP)組件 驗證螺栓法蘭接頭設計的試驗方法16EN 1636-3-1997 Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) base

52、d on unsaturated polyester resin (UP) - Part 3: Fittings無壓排水和污水用塑料管道系統 基于不飽和聚脂樹脂(UP)的玻璃纖維增強熱固性塑料(GRP) 第3部分：管件17EN 1636-5-1997 Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 5: Fitness for

53、 purpose of the joints無壓力排水和污水用塑料管道系統 基于不飽和聚脂樹脂(UP)的玻璃纖維增強熱固性塑料 第5部分：接頭的適用性18EN 1636-6-1997 Plastics piping systems for non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Part 6: Practices for installation無壓力排水和污水用塑料管道系統 基于不

54、飽和聚脂樹脂(UP)的玻璃纖維增強熱固性塑料 第6部分：安裝規程19EN 1638-1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test method for the effects of cyclic internal pressure塑料管系統 玻璃增強熱固塑料管(GRP) 循環內壓試驗方法20EN 1862-1997 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pi

55、pes - Determination of the relative flexural creep factor following exposure to a chemical environment塑料管系統玻璃增強熱固塑料管(GRP) 暴露在化學環境下彎曲蠕變系數的測定21EN 637-1994 Plastics piping systems - Glass-reinforced plastics components - Determination of the amounts of constituents using the gravimetric method塑料管系統玻璃增強

56、塑料組件用重量分析法測定成分含量22EN 705-1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use塑料管系統玻璃纖維增強熱固性塑料(GRP)管和管件 回歸分析方法及其使用23EN 761-1994 Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - De

57、termination of the creep factor under dry conditions塑料管系統 玻璃增強熱固性塑料管干態下蠕變系數的測定24EN 976-1-1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks玻璃增強塑料地下貯罐儲存液體石油燃料的常壓臥式圓柱型貯罐 第1部分：單壁罐要求和試驗方法25EN 976-2-1997 Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall tanks玻