QPA-制程稽核準則

1、PROCESS AUDIT GUIDELINES制程稽核準那么1.0 SUGGESTED CONTENT包含的內容1.1 WORK INSTRUCTIONS 作業指導書Available at each process step每個步驟是否被執行Work In structio n un der revisi on con trol and at curre nt revisi on level作業指導書是否有版本管制及當前版本。Calls out curre nt product ion part nu mber and revisi on level有沒有注明產品編號及版本。Calls o

2、ut direct materials P/N, description, usage, and designator有無直接羅列所用材料料號，規格，用量，點位。Calls out operati on mach ine n ame & stati on nu mber, mach ine program n ame & revisio n, fixtures n ame/part nu mber & revisi on有無機器名稱/編號，機器程序名/版本，治具名/編號/版本。Call out tools/gages with part nu mber or n ame, in direct

3、materials with detailed descripti on, and their work ing con diti ons有無羅列所用工具及計量器名稱或編號，以及用到的間接材料如膠，錫絲有無具體說 明，包括他們工作條件。Calls out work process/i nstructi on for the stati on每一站有無羅列作業步驟及作業指導。Call out highlights/special no tes for the operati on在作業指導書中有沒有對相關考前須知做重點標識。1.2 OPERATOR 作業員Is operator certifie

4、d for operati on作業員是否有受過相關作業資格培訓If operator is in training, verify adequate supervisi on在訓新職工上線是否有人做足夠的監督檢查Ongoing program for re-certificatio n of operators對作業員是否有再認證方案.Is operatio n staffed per Work In struct ions作業指導書是否規定各操作負責人員Is operati on being performed per Work In struct ions作業指導書上規定的操作是否都被執

5、行Is the operator mon itored for his/her performa nee作業員的績效是否被考核1.3 MATERIALS 材料VL controlProduction materials for each operation specified in Work Instructions and under A 作業指導書是否有羅列出每站所需用到的生產材料 , 并列入管制 .Verify production materials are revision controlled & current 檢查生產材料是否有版本管制及目前版本狀況Handling & sto

6、rage guidelines called out in Work Instruction 作業指導書中是否認義材料處理 & 存儲方法 .Compliance with handling & storage guidelines documented 材料處理 & 存儲方法是否被有效執行Scrap and nonconforming material is isolated from normal production 廢料和不良品是否與良品隔離Material preparation operations documented and controlled 備料動作有無文件說明并被控制Co

7、ntrolled by an effective FIFO system 是否有一個有效的先進先出的系統 ,并被執行Verify traceability of materials 驗證材料的可追溯性Self audit system to ensure correct material usage 有無自檢系統以確保材料的正確使用Materials are clearly marked/identified on line and storage area 在產線上及存儲區的材料是否有清楚的鑒別標識1.4 EQUIPMENT / TOOLING / FIXTURES儀器 / 工具 /治具Ca

8、libration 校準Preventive maintenance (PM) records and schedules, maintenance log 預防保養履歷記錄 ,時間表 ,保養日志Hour log maintained between PM s, replacement, etc.預防保養，更換等有無做時間記錄，按小時數實施Tooling & fixtures identified by part number and revision 工治具編號與版本Operating procedure available at each operation 是否有對應于每一操作的作業程序

9、Cycle count management / hour log for tooling 對工具模具有無做周期循環 /小時數管理ECO/ECN tracking工程變更單 /工程變更通知跟蹤Machine & tool capability studies performed and on file 是否完成儀器工具性能研究并保存相關文件1.5 ESD CONTROL (IF APPLICABLE) 靜電管制 (如 可適用 )Training records for all personnel 對所有相關人員的培訓記錄Daily test logs in place現場測試日?qǐng)?bào)All ESD

10、 systems in good working order and are properly installed and maintained所有正?？刂频撵o電系統是否被恰當?shù)匕惭b并保養維護ESD earth ground rod is checked for grounding impedance and recorded on annual basis 是否每年檢查 ESD 接地棒對地阻抗并記錄ESD grounding main system is checked for grounding impedance and recorded on monthly basis 是否每月檢測

11、ESD 接地系統對地阻抗并記錄Instrument/fixtures/benches are checked for grounding impedance and recorded on weekly basis 是否每周檢測并記錄儀器設備/治具 /椅子等對地阻抗Wrist/heel strip, and/or conductive shoes are checked and recorded by shift 是否每班檢測并記錄靜電手環或傳導鞋。Wireless wrist strip is not allowed unless used with ionic blower and con

12、ductive floor 無線手環是不被允許的，除非在離子吹風機和傳導地板環境中使用All semiconductor materials are in ESD free container, package or bin when/during storage, transfer, and handling所有半導體材料在存儲，運輸及搬運中必須用防靜電容器，防靜電袋等進行靜電防護。People, semiconductor materials, machines, instrument, tools, fixtures, and working benches at ESD sensiti

13、ve operation stations are grounded 在靜電敏感站的人員，半導體材料，機器，工具，治具及工作桌椅必須接地。1.6 QUALITY CONTROL 品質控制Effective SPC in place and closed loop corrective action is taken when out-of-control occurs 現場是否有做有效的 SPC管制，當超出管制點時是否做CLCA。Control limits of control chart are reviewed on monthly basis 是否每月審查管制圖之上下限Effectiv

14、e Continuous Improvement Process (CIP) in place 現場是否實施有效持續改進過程Quality acceptance/rejection criteria established for each process step 每段制程是否建立允收 /拒收標準Effective quality inspection and measurement capability in place at each inspection station 在每一個檢驗站是否有進行有效的品質檢驗與測量Evidence that operators receive qual

15、ity feedback and are responsible for the quality of their work 是否保證作業員可收到品質反應并改進他們作業品質。Self audit system in place and effective 是否有自我稽核系統并有效實施1.7 PRODUCTION PROCESS / FLOW 生產制程 /流程Does layout prevent misrouting of product and minimize handling 線體設置是否能保證制程順暢產品不滯流以達成最少的人工處理。Evaluate physical layout fo

16、r proper line balance and potential bottlenecks 線體規劃有無對其平衡及潛在瓶頸進行評估Is flow of defective product documented 是否有文件定義不良品的處理流程Is line stop criteria documented and enforced to prevent excessive buildup of defective product 是否有文件定義停線標準以強迫防止生產額外不良品Is customer sprocess flow documented 是否文件化客戶制程流程1.8 TEST PR

17、OCESS 測試過程Verify that test process is documented 檢查測試步驟方法是否文件化Is test equipment and software under revision control 是否有對測試儀器與軟件進行版本管制Test yield and defect data collection system exists, is automated and collects all data 現有的測試單元及不良數據收集系統是否是自動化以及是否能夠收集到所有數據 Feedback to the defect source from test yie

18、lds and defect data for improvement 測試區域是否能及時反應不良以加以改善Test process and production flow prevents test escapes or misrouting of product 測試過程以及生產流程是否可以防止測試漏失及保證生產順暢1.9 FAILURE ANALYSIS PROCESS 不良分析過程Is process documented 該制程是否文件化orAre production materials and repair materials effectively controlled to

19、prevent misrouting wrong parts being used對生產及維修材料進行有效地控制以防止用錯料。Are there proper skills, training, and equipment to support failure analysis 是否有適當?shù)募记桑嘤?xùn)及設備支持不良分析Age and quantity of debug WIP is controlled 是否對調試工具的使用年限及數量進行控制。Effective method to prioritize debug activities 使用有效的方法對調試動作優先順序進行區分Failure

20、analysis output drives corrective actions 是否能從不良分析之結果得出改善措施Failure analysis data communicated to 客戶 on regular basis 是否能定期將不良分析數據傳送給客戶Process in place to verify effectiveness of FA and corrective actions 是否有適當?shù)倪^(guò)程來驗證不良分析及改善措施的有效性Process in place to evaluate No Fault Found defects (also CND -Can Not D

21、uplicate) 使用適當?shù)姆椒ㄔu(píng)估 no fault found 不良。Rework Process rework 過程Procedures for each type of rework operation確定每種類型返工的流程Proper tools in place to rework all production materials and components used 在適當?shù)胤街惺褂眠m當工具 rework 所有的制造材料和元件Data collection for all rework performed收集所有 rework 數據Data collection automa

22、ted / filing computerized數據收集自動化 / 用電腦進行整理Data feedback to defect source將數據反應到不良源中心Accept/reject criteria defined and available at rework stationVerification of rework quality 驗證 rework 質量Documented process flow for rework operations對 rework 操作的流程進行文件化Reworked material marked (physical marking or computer scan) 對已 rework 材料進行標注 ( 對其本身進行標注或電腦掃描 ) Rework history available for all reworked materials 將所有 rework 材料列入可用的 rework 檔案Reworked materials go through proper test and inspection re-flow channel 對已 rework 材料進行適當?shù)臏y(cè)