AIX_HACMP(安裝,配置,施實)全過程

1、HACMP安裝、配置，施實全過程環境：兩臺P630：P630_1，P630_2磁盤陳列：7133-D40共享卷組：oravg1、 在兩臺計算機上設置IP地址（1） 在p630_1機上：A. 配置第一塊boot網卡->#smitty->Communications Applications and Services->TCP/IP->Minimum Configuration & Startupselect en2* HOSTNAME p630_1* Internet ADDRESS (dotted decimal 10.10.9.1Network MASK (d

2、otted decimal 255.255.255.0* Network INTERFACE en1NAMESERVERInternet ADDRESS (dotted decimal DOMAIN Name Default GATEWAY Address B. 配置第二塊boot網卡->#smitty->Communications Applications and Services->TCP/IP->Minimum Configuration & Startupselect en1* HOSTNAME p630_1* Internet ADDRESS (do

3、tted decimal 10.10.10.1Network MASK (dotted decimal 255.255.255.0* Network INTERFACE en3NAMESERVERInternet ADDRESS (dotted decimal DOMAIN Name Default GATEWAY Address （2） 在p630_2機上：A. 配置第一塊boot網卡->#smitty->Communications Applications and Services->TCP/IP->Minimum Configuration & Star

4、tupselect en2* HOSTNAME p630_2* Internet ADDRESS (dotted decimal 10.10.9.2Network MASK (dotted decimal 255.255.255.0* Network INTERFACE en1NAMESERVERInternet ADDRESS (dotted decimal DOMAIN Name Default GATEWAY Address B. 配置第二塊boot網卡->#smitty->Communications Applications and Services->TCP/IP

5、->Minimum Configuration & Startupselect en1* HOSTNAME p630_2* Internet ADDRESS (dotted decimal 10.10.10.2Network MASK (dotted decimal 255.255.255.0* Network INTERFACE en3NAMESERVERInternet ADDRESS (dotted decimal DOMAIN Name Default GATEWAY Address 2、 修改/etc/hosts文件，內容如下：127.0.0.1 loopback lo

6、calhost p630_1 10.10.9.1 boot_11 p630_110.10.10.1 boot_12 p630_1192.168.1.1 service110.10.9.2 boot_21 p630_210.10.10.2 boot_22 p630_2192.168.1.2 service23、 在p630_1上建立共享卷組建立oravg共享卷組->#smitty ->System Storage Management (Phisical & Logical Storage->Logical Volume Manager->Volume Group

7、s->Add a Volume GroupVOLUME GROUP name oravgPhysical partition SIZE in megabytes 128* PHYSICAL VOLUME names hdisk2Activate volume group AUTOMATICALLY noat system restart?Volume Group MAJOR NUMBER Create VG concurrent Capable? yesAuto-varyon in Concurrent Mode? no4、 在p630_2上import共享卷組（1） import or

8、avg共享卷組->#smitty->System Storage Management (Phisical & Logical Storage->Logical Volume Manager->Volume Groups->Import a Volume GroupVOLUME GROUP name oravg* PHYSICAL VOLUME name hdisk2Volume Group MAJOR NUMBER Make this VG Concurrent Capable noMake default varyon of VG Concurrent

9、? no（2） 修改oravg共享卷組屬性->#smitty->System Storage Management (Phisical & Logical Storage->Logical Volume Manager->Volume Groups->Set Characteristics of a Volume Group->Change a Volume Groupselect * VOLUME GROUP name oravgVOLUME GROUP name oravg* ACTIVATE volume group AUTOMATICALLY

10、 noat system restart?* A QUORUM of disks required to keep the volume yesgroup on-line?Convert this VG to Concurrent Capable? no* Autovaryon VG in Concurrent Mode? no5、 在p630_1 和p630_2上配置非TCP/IP網絡->#smitty->Devices->TTY->Add a TTYselect tty rs232 Asynchronous TerminalTTY type ttyTTY inter

11、face rs232Description Terminal asynchroneParent adapter sa3* PORT number 0BAUD rate 9600PARITY noneBITS per characte Number of STOP BITS 1TERMINAL type dumbSTATE to be configured at boot time available.Enable LOGIN disable用Serial to Serial Cable連接一號機和二號機的COM3,作為HACMP的心跳線測試心跳線:1 在p630_1機上執行: cat <

12、 /dev/tty02 在p630_2上執行: cat /etc/hosts > /dev/tty03 在p630_1上若顯示出p630_2的/etc/hosts文件內容,說明心跳線配置正確6、 建立應用服務器啟動腳本在/etc/hascript下分別建立dbstart.sh, dbstop.sh, 然后修改文件屬性為755:#chomd 755 *7、 HACMP的設置（1）定義CLUSTER->Initialization and Standard Configuration->Add Nodes to an HACMP ClusterAdd/Change/Show an

13、 HACMP Cluster輸入字段* Cluster Name wlyNOTE: HACMP must be RESTARTEDon all nodes in order for change to take effect（2）定義p630_1節點-> Extended Configuration-> Extended Topology Configuration->Configure HACMP Nodes-> Add a Node to the HACMP ClusterAdd a Node to the HACMP Cluster輸入字段* Node Name

14、p630_1Communication Path to Node +（2）定義p630_2節點-> Extended Configuration-> Extended Topology Configuration->Configure HACMP Nodes-> Add a Node to the HACMP ClusterAdd a Node to the HACMP Cluster輸入字段* Node Name p630_1Communication Path to Node +(3 定義網絡A. 定義IP網絡-> Extended Configuration

15、->Extended Topology Configuration->Configure HACMP Networks-> Add a Network to the HACMP Cluster Add an IP-Based Network to the HACMP Cluster輸入字段 * Network Name net_ether_01 * Network Type ether* Netmask 255.255.255.0 +* Enable IP Address Takeover via IP Aliases Yes +IP Address Offset for H

16、eartbeating over IP Aliases B. 定義非IP網絡-> Extended Configuration->Extended Topology Configuration->Configure HACMP Networks-> Add a Network to the HACMP Cluster選擇# Pre-defined Serial Device Types 中的rs232Add a Serial Network to the HACMP Cluster輸入字段* Network Name net_rs232_01* Network Type

17、 rs232(4 定義網絡接口A. 定義IP網絡接口定義Boot_11接口:-> Extended Configuration-> Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices-> Add Communication Interfaces/Devices選擇 Add Pre-defined Communication Interfaces and Devices選擇 Communication Interfaces選擇net_ether_01 (0.0.

18、0.0/0 Add a Communication Interface輸入字段* IP Label/Address boot_11 +* Network Type ether* Network Name net_ether_01* Node Name p630_1 +Network Interface 定義Boot_12接口:-> Extended Configuration-> Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices-> Add Communic

19、ation Interfaces/Devices選擇 Add Pre-defined Communication Interfaces and Devices選擇 Communication Interfaces選擇net_ether_01 (0.0.0.0/0 Add a Communication Interface輸入字段* IP Label/Address boot_12 +* Network Type ether* Network Name net_ether_01* Node Name p630_1 +Network Interface 定義boot_21接口:-> Exte

20、nded Configuration-> Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices-> Add Communication Interfaces/Devices選擇 Add Pre-defined Communication Interfaces and Devices選擇 Communication Interfaces選擇net_ether_01 (0.0.0.0/0 Add a Communication Interface輸入字段* IP Labe

21、l/Address boot_21 +* Network Type ether* Network Name net_ether_01* Node Name p630_2 +Network Interface 定義boot_22接口:-> Extended Configuration-> Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices-> Add Communication Interfaces/Devices選擇 Add Pre-defined Commu

22、nication Interfaces and Devices選擇 Communication Interfaces選擇net_ether_01 (0.0.0.0/0 Add a Communication Interface輸入字段* IP Label/Address boot_22 +* Network Type ether* Network Name net_ether_01* Node Name p630_2 +Network Interface B. 定義非IP網絡接口定義p630_1tty接口:-> Extended Configuration-> Extended T

23、opology Configuration->Configure HACMP Communication Interfaces/Devices-> Add Communication Interfaces/Devices選擇 Add Pre-defined Communication Interfaces and Devices選擇 Communication Device選擇 net_rs232_01Add a Communication Device輸入字段* Device Name p630_1tty* Network Type rs232* Network Name net

24、_rs232_01* Device Path /dev/tty0* Node Name p630_1 定義p630_2tty接口:-> Extended Configuration-> Extended Topology Configuration->Configure HACMP Communication Interfaces/Devices-> Add Communication Interfaces/Devices選擇 Add Pre-defined Communication Interfaces and Devices選擇 Communication Dev

25、ice選擇 net_rs232_01Add a Communication Device輸入字段* Device Name p630_2tty* Network Type rs232* Network Name net_rs232_01* Device Path /dev/tty0* Node Name p630_2 (5 定義應用服務器定義wlyapp應用服務器:->Initialization and Standard Configuration->Configure Application Servers->Add an Application ServerAdd Ap

26、plication Server輸入字段* Server Name wlyapp* Start Script /etc/hascript/dbstart.sh* Stop Script /etc/hascript/dbstop.sh(6 定義共享資源組定義wlyres資源組->Initialization and Standard Configuration->Configure HACMP Resource Group->Add a Resource Group選擇CascadingAdd a Resource Group with a Cascading Manageme

27、nt Policy (standard輸入字段* Resource Group Name wlyres*Participating Node Names (Default Node Priority p630_1 p630_2 +(7 修改資源組屬性修改wlyres資源組屬性:->Initialization and Standard Configuration->Configure HACMP Resource Group-> Change/Show Resources for a Cascading Resource Group(standardChange/Show R

28、esources for a Cascading Resource Group輸入字段Resource Group Name wlyresParticipating Node Names (Default Node Priority p630_2 p630_1 * Service IP Labels/Addresses +Volume Groups oravg +Filesystems (empty is ALL for VGs specified +Application Servers wlyapp +(8 定義Service IP定義p630_1的service IP地址:->Initialization and Standard Configuration->Configure Resources to Make Highly Available->Configure Service IP