法國接頭標準

1、法國接頭標準(NF joint standards)ANSI|BS|DIN|EN|GB|ISO|JIS|NF|DIC編號中文名稱英文名稱NF A48-720-1999建筑物排水用鑄鐵管和配件及其接頭和附件.要求、試驗方法和質量保證(Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings. Requirements, test methods and quality assurance.)NF A48-801-2002水管用球墨鑄鐵管、配件和附件及其

2、接頭.要求和試驗方法(Ductile iron pipes, fittings, accessories and their joints for water pipelines - Requirements and test methods.)NF A48-810-1995燃氣管道用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法(Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)NF A48-810/A1-1999燃氣管道用球

3、墨鑄鐵管、配件、附件及其接頭.要求和試驗方法(Ductile iron pipes, fittings, accessories and their joints for gas pipelines. Requirements and test methods.)NF A48-820-1994污水排放用球墨鑄鐵管、配件、附件及其接頭.要求和試驗方法(Ductile iron pipes, fittings, accessories and their joints for sewerage application. Requirements and tests methods.)NF A48-

4、830-1983鑄制產品.有壓力的飲用水聚氯乙烯管道用球墨鑄鐵接頭(Foundry products. Spheroidal graphite cast iron sittings for PVC drinking water pipes under pressure.)NF A48-860-1981鑄造產品.承壓管道用可鍛鑄鐵管道部件.承插系列.GS快速接頭.連接尺寸和連接附件(Foundry products. Ductile cast iron piping elements. Socket serie. GS express joint. Assembly dimensions and

5、 joint accessories.)NF A48-870-1981鑄造產品.承接管道用可鍛鑄鐵管道部件.承插系列.GS標準接頭.連接尺寸和連接附件(Foundry products. Ductile cast iron piping elements. Socket series. GS standard joint. Assembly dimensions and joint accessories.)NF A49-150-2003包括人類生活用水在內的水成液的傳送用非合金鋼管和管接頭.技術交貨條件(Non-alloy steel tubes and fittings for the c

6、onveyance of aqueous liquids including water for human consumption - Technical delivery conditions.)NF A49-191-1975鋼管.毛細管焊接或焊接釬接用鋼或鑄鐵接頭.（尺寸.交貨技術條件.）(STEEL TUBES. SPIGOT OR MIXED CONNECTIONS MADE OF STEEL OR CAST IRON FOR CAPILLARY BRAZING OR BRAZE WELDING. DIMENSIONS. TECHNICAL DELIVERY CONDITIONS.)

7、NF A49-716-1998鋼管.焊接接頭鍍膜配件和管的外結構.(STEEL TUBE. EXTERNAL CONSTITUTION OF TUBE AND FITTING COATING FOR WELDED JOINT.)NF A72-120-1973鋼鐵廠.氣體管道和大直徑閥.帶法蘭的接頭（PN6）(LARGE DIAMETER PIPES AND VALVES FOR GASEOUS FLUIDS. FLANGE CONNECTIONS PN 6.)NF A80-022-1999焊接.帶說明的多語種接頭術語(WELDING. MULTILINGUAL TERMS FOR WELDED

8、 JOINTS WITH ILLUSTRATIONS. (EUROPEAN STANDARD EN 12345).)NF A82-104-1-2000電阻焊接設備.電極接頭,外錐度1:10.第1部分:圓錐形接頭,錐度1:10(Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10.)NF A82-104-2-2001電阻點焊.外錐度1:10電極接頭.第2部分:端推力電極用平行柄接頭(Resistance spot welding - Elec

9、trode adaptors, male taper 1:10 - Part 2 : parallel shank fixing for end-thrust electrodes.)NF A82-104-3-1992電阻點焊.電極帽的活動接頭(Resistance spot welding electrode caps.)NF A84-420-1991氣焊設備和有關方法.減壓閥入品接頭.尺寸(Equipment for gas welding and allied processes. Pressure regulators inlet connections. Dimensions.)NF

10、 A84-444-2003氣焊設備.焊接、切割和相關工藝用乙炔復式接頭系統.高壓裝置的安全要求(Gas welding equipment - Acetylene manifold systems for welding, cutting and allied processes - Safety requirements in high-pressure devices.)NF A87-011-1994帶有電焊條的金屬電弧熔焊、氣體保護金屬弧焊及氣焊.鋼接頭的制備(Metal-arc welding with covered electrode, gas-shielded metal-arc

11、 welding and gas welding. Joint preparations for steel.)NF A87-013-2-1999焊接和相關工藝.接頭的預處理.第2部分:鋼的埋弧焊(WELDING AND ALLIED PROCESSES. JOINT PREPARATION. PART 2 : SUBMERGED ARC WELDING OF STEELS. (EUROPEAN STANDARD EN ISO 9692-2).)NF A87-013-3-2001焊接和相關工藝.接頭預處理的推薦方法.第3部分:鋁和鋁合金的金屬焊條惰性氣體保護焊和鎢極惰性氣體保護焊(Weldin

12、g and allied processes - Recommendations for joint preparation - Part 3 : metal inert gas welding and tungsten inert gas welding of aluminium and its alloys.)NF A89-057-8-2002金屬材料焊接程序規范和鑒定.焊接程序試驗.第8部分:管對管-板接頭的焊接(Specification and qualification of welding procedures for metallic materials - Welding p

13、rocedure test - Part 8 : welding of tubes to tube-plate joints.)NF A89-208-1987焊接和有關技術.點焊,凸焊或縫焊搭接接頭(WELDING AND ALLIED TECHNIQUES. SPOT,PROJECTION OR SEAM WELDED LAP JOINTS.)NF A89-231-1992鋼的弧焊接頭.質量缺陷等級導則(ARC-WELDED JOINTS IN STEEL. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN

14、 25817).)NF A89-232-1994鋁和可焊合金的弧焊接頭.質量缺陷等級導則(ARC-WELDED JOINTS IN ALUMINIUM AND ITS WELDABLE ALLOYS. GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS. (EUROPEAN STANDARD EN 30042).)NF A89-233-1996焊接.電子束和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋼(WELDING. ELECTRONS AND LASER BEAM WELDED JOINTS. GUIDANCE ON QUALITY LEVELS

15、FOR IMPERFECTIONS. PART 1 : STEEL. (EUROPEAN STANDARD EN ISO 13919-1).)NF A89-234-2001焊接.電子和激光束焊接接頭.缺陷的質量級別導則.第1部分:鋁及其可焊合金(Welding - Electron and laser beam welded joints - Guidance on quality levels for imperfections - Part 2 : aluminium and its weldable alloys.)NF A89-240-1987焊接和有關技術.電阻點焊、凸焊或縫焊搭接接

16、頭.帶解釋的缺陷分類(WELDING AND ALLIED PROCESSES. RESISTANCE SPOT,PROJECTION AND SEAM WELDED LAP JOINTS. CLASSIFICATION OF DEFECTS WITH EXPLANATORY COMMENTS.)NF A89-430-2000釬焊.釬焊接頭的無損檢驗(Brazing - Non-destructive examination of brazed joints.)NF A89-510-1997焊縫的無損檢驗.焊接接頭的X射線照相檢驗(Non-destructive examination of

17、welds. Radiographic examination of welded joints.)NF A89-510/A1-2003焊接無損檢驗.焊接接頭射線照相檢驗(Non-destructive examination of welds - Radiographic examination of welded joints.)NF A89-511-1998焊縫的無損檢驗.焊接接頭的X射線照相檢驗.驗收等級(Non-destructive examination of welds. Radiographic examination of welded joints. Acceptance

18、 levels.)NF A89-511/A1-2003焊縫的無損檢驗.焊接接頭的X射線照相檢驗.驗收水平(Non-destructive examination of welds - Radiographic examination of welded joints - Acceptance levels.)NF A89-520-1997焊縫的無損檢驗.焊接接頭的超聲波檢驗(Non destructive examination of welds. Ultrasonic examination of welded joints.)NF A89-520/A1-2002焊縫的無損檢驗.焊接接頭的超

19、聲波檢驗(Non-destructive testing of welds - Ultrasonic testing of welded joints.)NF A89-521-1997焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收等級(Non destructive examination of welds. Ultrasonic examination of welded joints. Acceptance levels.)NF A89-521/A1-2002焊縫的無損檢驗.焊接接頭的超聲波檢驗.驗收等級(Non-destructive testing of welds - Ultrasoni

20、c testing of welded joints - Acceptance levels.)NF A89-810-1-1999熱塑性半成品的焊接接頭試驗.第1部分:彎曲試驗.(Testing of welded joints of thermoplastics semi-finished products - Part 1 : bend test.)NF A89-810-3-2000熱塑性半成品的焊接接頭試驗.第3部分:拉伸蠕變試驗.(Testing of welded joints of thermoplastics semi-finished products - Part 3 : t

21、ensile creep test.)NF A89-810-4-2002熱塑性半成品的焊接接頭試驗.第4部分:剝離試驗(Testing of welded joints of thermoplastics semi-finished products - Part 4 : peel test.)NF A89-810-5-2000熱塑半成品焊接接頭的試驗.第5部分:宏觀檢驗(Testing of welded joints of thermoplastics semi-finished products - Part 5 : macroscopic examination.)NF A89-810

22、-7-2003熱塑性半成品焊接接頭的試驗.第7部分:腰形試驗樣品的抗拉試驗(Testing of welded joints of thermoplastics semi-finished products - Part 7 : tensile test with waisted test specimens.)NF A89-810-8-2002熱塑性半成品的焊接接頭試驗.第8部分:要求(Testing of welded joints of thermoplastics semi-finished products - Part 8 : requirements.)NF B34-001-19

23、76玻璃制儀器、管路及接頭.硼硅3.3玻璃的特性(Glass plant, pipeline and fittings. Properties of borosilicate glass 3.3.)NF B34-002-1976玻璃制儀器、管路及接頭.試驗、操作和使用的一般規則(Glass plant, pipeline and fittings. General rules for testing, handling and use.)NF B34-003-1999玻璃制儀器、管路及接頭.標稱內徑15-1000mm管與管接頭.兼容性與互換性(Glass plant, pipeline and

24、 fittings. Pipeline and fittings DN 15 to DN 1000. Compatibility and interchangeability.)NF B35-008-1974實驗室用玻璃器皿.錐形瓶和帶有磨光接頭的有頸錐形瓶(LABORATORY GLASSWARE. CONICAL FLASKS. CONICAL FLASKS WITH CONICAL GROUND GLASS JOINT.)NF B35-012-1972實驗室用玻璃器皿.帶互換磨光元件的球形接頭(INTERCHANGEABLE SPHERICAL GROUND JOINTS.)NF B35

25、-013-1983實驗室用玻璃器皿.帶互換磨光錐形接頭(Laboratory glassware. Interchangeable conical ground joints.)NF B35-022-1977實驗室用玻璃器皿.蒸餾器配件.適配器.轉接器.接頭(LABORATORY GLASSWARE. COMPONENTS OF DISTILLATION EQUIPEMENT. ADAPTATORS-EXTENSIONS-UNIONS.)NF C20-131-1974鋁導線用帶導電鍍層的有鋁片或銅片的接頭.規則和尺寸(LUGS WITH COPPER OR ALUMINIUM FLATS AN

26、D WITH CONDUCTING COATING FOR ALUMINIUM CONDUCTORS. REQUIREMENTS AND DIMENSIONS.)NF C46-512-1999工業處理控制閥.第3-3部分:尺寸.對焊接的頭尾相接尺寸.兩接頭球型直接式控制閥(歐洲標準EN 60534-3-3)(Industrial-process control valves. Part 3-3 : dimensions. End-to-end dimensions for buttweld, two-way, globe-type, straight pattern control valve

27、s.)NF C52-152-1969變壓器.帶凸緣的滑輪支架叉形接頭和鎖定裝置(TRANSFORMERS. DIMENSIONS OF TRAVELLING WHEELS AND ASSOCIATED LOCKING DEVICES.)NF C52-152M1-1970變壓器.帶凸緣的滑輪支架叉形接頭和鎖定裝置(TRANSFORMERS DIMENSIONS OF TRAVELLING WHEELS AND ASSOCIATED LOCKING DEVICES.)NF C64-021-1991交流電用高壓設備.管線用的接頭(CONNECTORS FOR TUBES.)NF C66-495-19

28、88架空線路用絕緣子和器材.絕緣子鏈元件的球狀頭和球槽接頭.特性尺寸(Insulators and fittings for overhead lines. Dimensions of ball and socket couplings of string insulator units.)NF C66-496-1988架空線路用絕緣子和器材.架空線路絕緣體和器材.絕緣子鏈元件的球狀接頭和球槽頭鎖定裝置.第1部分：尺寸和一(Isolators and fittings for overhead lines. Locking devices for ball and socket couplin

29、gs of string insulator units.)NF C66-800-1978架空線路用絕緣子和器材.架空線路連接件.接頭，分接頭和端點連接件(INSULATORS AND FITTINGS FOR OVERHEAD LINES. CONNECTION JOINTS FOR OVERHEAD LINES. JUNCTION JOINTS,TEE JOINTS,AND END-JOINTS.)NF C74-347-1993低型接頭式可植入心臟起搏器(EN 50077)(Low-profile connector implantable cardiac pacemakers.)NF C

30、93-421-1983電子元件.連接元件.型節距為mm單面印制電路板用插入式多觸點接頭(Electronic components. Connecting devices. Multicontact edge socket and board mounted connectors for single clad printed boards with 2,54 mm spacing. Type he 7. General requirements.)NF C93-422-1977電子元件.連接元件.多觸點圓柱狀接頭.一般規定(Electronic components. Connecting

31、devices. Circular multipole connectors.)NF C93-423-1982電子元件.連接元件.型節距為mm雙面印刷電路板用插入式多觸點接頭.特殊規范匯編(Electronic components. Connecting devices. Multicontact edge socket and board mounted connectors for double clad printed boards with 2,54 mm spacing. Type HE 9. General requirements.)NF C93-424-1982電子元件.連接

32、元件.型插入式印刷電路板多觸點接頭及其相應的型節距為mm的插座.一般規定(Electronic components. Connecting devices. Board mounted printed circuits connectors with contact and termination spacing of 1,27 mm. Type HE 8. General requirements.)NF C93-425-1981電子元件.連接元件.帶外殼的支架和板條的多觸點接頭.一般要求(ELECTRONIC COMPONENTS. CONNECTING DEVICES. MULTIPO

33、LE CONNECTORS WITH SHELL FOR RACKS AND PANELS. GENERAL REQUIREMENTS.)NF C93-426-1977連接元件.模制件的矩形多觸點接頭.一般規定(ELECTRONIC COMPONENTS. CONNECTING DEVICES. MULTIPOLE RECTANGULAR CONNECTORS WITHOUT SHELL. GENERAL REQUIREMENTS.)NF C93-428-1981電子元件. 連接元件.與紗包電纜自動剝離間距為mm的型多觸點插入式接頭及其垂直距離為mm(ELECTRONIC COMPONENTS

34、. CONNECTING DEVICES. INSULATION DISPLACEMENT CONNECTORS. TYPE HE 10. GENERAL REQUIREMENTS.)NF C93-429-1986質量保證的電子元件.連接元件.間距為mm的印刷電路板用插入式多觸點接頭.型.一般規定(Electronic components under quality assessment. Connecting devices. Multicontact board mounted connectors for printed boards with 2,24 mm spacing. Typ

35、e he 11. General requirements.)NF C93-462-1981電子設備元件.終端連接系統.可移動蠕變式模件.接頭.一般要求(Components for electronic equipment. Terminal junction system. Modules with removable crimp-type. Contacts. General requirements.)NF C93-557-2001RF接頭、接頭電纜組件和電纜.互調程度測量(RF connectors, connector cable assemblies and cables - I

36、ntermodulation level measurement.)NF C93-561-1981電子元件.螺釘鎖定的小型同軸接頭.一般規定(Components for electronic equipment. Miniature coaxial connectors with screw coupling. General requirements.)NF C93-562-1981電子元件.彈簧栓耦接的小型同軸接頭.一般規定(Components for electronic equipment. Miniature coaxial connectors with snap-on cou

37、pling. General requirements.)NF C93-564-1981電子元件.接線柱鎖定射頻用同軸接頭（系列）(Electronic components. Miniature coaxial connectors with bayonet coupling (kbn series). General requirements.)NF C93-566-1981電子元件.螺釘鎖定射頻用同軸接頭（系列）.一般規定(ELECTRONIC COMPONENTS. RF COAXIAL CONNECTORS WITH SCREW COUPLING (TYPE KN). GENERAL

38、 REQUIREMENTS.)NF C93-570-1986電子元件.射頻同軸接頭.系列.阻抗.型(RF COAXIAL CONNECTORS 1,6-5,6 SERIE CHARACTERISTIC IMPEDANCE 75 OHMS. TYPE KTB.)NF C93-571-1986電子元件.射頻同軸接頭.系列.型(RF COAXIAL CONNECTORS 1,0-2,3 SERIE TYPE KTA.)NF C93-618-3-2002質量評定的石英晶體裝置.第3部分:標準外形線和引線接頭(Quartz crystal units for assessed quality - Par

39、t 3 : standard outlines and lead connections.)NF C93-711-5-6-2003印制板和印制板組件.設計和使用.第5-6部分:附件(結合區/接頭)考慮.四面帶有J形引線的片狀載體(Printed boards and printed board assemblies - Design and use - Part 5-6 : attachment (land/joint) considerations - Chip carriers with J-leads on four sides.)NF C93-867-2-1-2002光纖通信系統中使用

40、的接頭組件和互連元件.產品規范.第2-1部分:端接在IEC 60793-2的B1類單模纖維上的FC-PC型(Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 2-1 : type FC-PC terminated on IEC 60793-2 category B1 singlemode fibre.)NF C93-867-3-1-2002光纖通信系統中使用的接頭組件和互連元件.產品規范.第3-1

41、部分:端接在IEC 60793-2的A1a類和A1b類多模纖維上(Connector sets and Interconnect components to be used in optical fibre communication systems - Product specifications - Part 3-1 : type SG terminated on IEC 60793-2 category A1a and A1b multimode fibr)NF C93-909-1-1-2001光纖互連裝置和無源元件性能標準.第1-1部分:總則和指南.互連裝置(接頭)(Fibre opt

42、ic interconnecting devices and passive components peformance standard - Part 1-1 : general and guidance - Interconnecting devices (connectors).)NF D36-105-1976燃氣洗衣機內部連接用帶機械接頭的軟管(FLEXIBLE HOSE WITH MECHANICAL CONNECTORS FOR JOINTS INSIDE GAS-POWERED WASHING MACHINES.)NF D36-107-1994家政學.家用管道煤氣裝置連接用的帶機

43、械接頭的11號或12號聚酰胺基未增強軟管(Household economy. Flexible piping based on polyamide 11 or 12 for the external connection of domestic appliances using gaseous fuels distributed by networks.)NF D36-108-1983家用灶具裝配用撓性金屬管內接頭(INTERNAL CONNECTION OF DOMESTIC COOKING APPLIANCES BY MEANS OF FLEXIBLE METAL HOSES.)NF D

44、36-210-2001建筑物燃氣管道工程的螺紋接頭再密封的方法(Means for resealing threaded joints of gas pipework in buildings.)NF E04-202-2-1996工業加工用管道、管道元件和儀器.圖形符號表示.第2部分:管道和接頭(Pipelines, pipe components and apparatus for industrial processes. Symbolic representation. Part 2 : pipelines and junctions.)NF E22-601-1985聯軸節.工業萬向接頭

45、傳動.定義.特性(Couplings. Industrial cardan shaft. Definition. Characteristics.)NF E22-603-1985聯軸節.工業萬向接頭傳動.驗收(Couplings. Industrial cardan shaft. Acceptance.)NF E22-604-1985聯軸節.工業萬向接頭傳動.用法蘭盤固定(Couplings. Industrial cardan shaft. Flange mounting.)NF E29-032-1985工業管道.鋼制構件.對焊接頭.準備(Industrial pipework. Steel

46、 components. Butt welding ends. Preparation.)NF E29-042-1-2000法蘭及其接頭.螺栓連接.第1部分:螺栓連接的選擇(Flanges and their joints - Bolting - Part 1 : selection of bolting.)NF E29-551-1939鋼制氣體螺距的連接管.雙接頭(STEEL CONNECTIONS WITH GAS THREAD. DOUBLE NIPPLES.)NF E29-692-1-2001氣瓶.微電子工業用氣瓶閥接頭.第1部分:輸出口接頭(Gas cylinders - Gas c

47、ylinder valve connections for use in the micro-electronics industry - Part 1 : outlet connections.)NF E29-692-2-2001氣瓶.微電子工業用氣瓶閥接頭.第2部分:氣瓶閥接頭的規范和型式試驗(Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 2 : specification and type testing for valve to cylinde

48、r connections.)NF E29-901-1-2001法蘭及其接頭.分級標識法蘭用墊圈.第1部分:有或無插件的非金屬平墊圈(Flanges and their joints - Gaskets for Class-designated flanges - Part 1 : non-metallic flat gaskets with or without inserts.)NF E29-901-2-2001法蘭及其接頭.分級標識法蘭用墊圈.第2部分:與鋼法蘭一起使用的螺旋形繞制墊圈(Flanges and their joints - Gaskets for Class-design

49、ated flanges - Part 2 : spiral wound gaskets for use with steel flanges.)NF E29-901-3-2001法蘭及其接頭.分級標識法蘭用墊圈.第3部分:非金屬PTFE包封墊圈(Flanges and their joints - Gaskets for Class-designated flanges - Part 3 : non-metallic PTFE envelope gaskets.)NF E29-901-4-2001法蘭及其接頭.分級標識法蘭用墊圈.第4部分:與鋼法蘭一起使用的波紋形、平的或帶槽的金屬和嵌條金屬

50、墊圈(Flanges and their joints - Gaskets for Class-designated flanges - Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.)NF E29-901-5-2001法蘭及其接頭.分級標識法蘭用墊圈.第5部分:與鋼法蘭一起使用的金屬環接墊圈(Flanges and their joints - Gaskets for Class-designated flanges - Part 5 :

51、 metallic ring-joint gaskets for use with steel flanges.)NF E29-902-1-1997法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第1部分:有或無襯套的非金屬平墊圈(Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 1 : non-metallic flat gaskets with or without inserts.)NF E29-902-2-1997法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第2部分:與鋼法蘭配套使用的螺旋

52、繞線墊圈(Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 2 : spiral wound gaskets for use with steel flanges.)NF E29-902-3-1997法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第3部分:非金屬聚四氟乙烯封裝墊圈(Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 3 : non-metallic PTFE envel

53、ope gaskets.)NF E29-902-4-1997法蘭及其接頭.PN指定法蘭用墊圈的尺寸.第4部分:與鋼法蘭配套使用的波紋形、平的或開槽金屬和填充金屬墊圈(Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Part 4 : corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges.)NF E39-012-2003區域供暖管道.直埋式熱水供應網用預隔熱連接的管道系

54、統.聚氨酯隔熱和聚乙烯外護層的入戶鋼管用接頭組件(District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies for steel service pipes, polyurethane thermal insulation and outer casing of polye)NF E48-051-1992液壓傳動.進氣口上的步進管螺紋接頭.接頭尺寸(Hydraulic fluid power. Pipe threaded

55、 connections for supply ports. Connecting dimensions.)NF E48-064-1998液壓傳動和一般用金屬導管的連接.第1部分:24喇叭形壓合接頭(Metallic tube connections for fluid power and general use. Part 1 : 24 degrees compression fittings.)NF E49-090-2-2003氣壓傳動.18mm和26mm五氣口方向控制閥.第2部分:帶光學電接頭的安裝面(Pneumatic fluid power - Five-port direction

56、al control valves, sizes 18 mm and 26 mm - Part 2 : mounting interfaces with optional electrical connector.)NF E62-541-1984工具自動變換工具用的連接錐.錐體度，的錐度工具柄的拉制接頭(Tool shank taper rate 7/24 for automatic tool changer. Retention knobs for shanks no 40, 45, 50.)NF E62-542-1990自動更換刀具用的7/24錐度刀柄.NO.30錐體及相應的拉伸接頭.尺寸

57、(TOOL SHANKS WITH 7/24 TAPERS FOR AUTOMATIC TOOL CHANGERS. SHANKS NO 30 AND CORRESPONDING RETENTION KNOBS. DIMENSIONS.)NF E86-400-1-2001法蘭和接頭.襯墊環形法蘭連接的設計規則.第1部分:計算方法(Flanges and their joints - Design rules for gasketed circular flange connections - Part 1 : calculation method.)NF F00-364-1991通用鐵路設備.與電引線有關的產品.電線接頭的插片尺寸為:2.80.5,50.8,6.30.8mm(RAILWAY MATERIAL IN GENERAL. PRODUCTS FOR ELECTRICAL CONNEC