科技英語寫作論文封皮及范文1

1、碩 士 課 程 論 文 論文題目： 課 程 名 稱： 專 業(yè)： 姓 名： 學(xué) 號： LAN ZHOU JIAO TONG UNIVERSITY Master Course Paper Paper Name: Course Name: Mayor: Name: Number: ON-LINE DIAGNOSIS OF MARINE DIESEL CRANKSHAFT CRACK BASED ON MAGNETIC MEMORY LI HAN-LIN, LIN JIN-BIAO, CAI ZHEN-XIONG, LU YONG (Marine Engineering Institute, Jime

2、i University, Xiamen, Fujian 361021) Abstract: This paper summarized recent diagnosis methods of marine diesel crankshaft crack and introduced the fundamental principle, development and application of metal magnetic memory testing (MMMT) diagnosis technology. Compared with other methods, a scheme de

3、veloped from MMMT combined with torsional signal to make on-line diagnosis of crankshaft crack was proposed, and the on-line diagnosis experimental platform of diesel was designed. Finally, comments were also made on the on-line MMMT method. Keywords: marine diesel; crankshaft; crack; metal magnetic

4、 memory 1Introduction Most of the crankshaft cracks on ocean marine diesel are deeply latent and difficult to detect artificially. In general, while the crack develops to a certain extent it will rupture and cause destructive breakage1. If inchoate stress concentration and tiny crack of crankshaft a

5、re detected on-line by Non-Destructive Testing (NDT) methods, the diesel can be stopped before the full development of the crack and thus rupture can be avoided. A new NDT method, MMMT developed rapidly recent years with advantages in such areas as cheap and simple sensors, measuring without impacti

6、ng diesel operation and long-term on-line detection. Therefore, there will be a great foreground to use MMMT in crankshaft crack detection. 2Dynamic Diagnosis of Crankshaft Crack 2.1 Static Diagnosis of Crankshaft Crack Crankshaft crack is one of the fatal faults in diesels. There are some static ND

7、T methods to diagnose crankshaft crack2 such as Ultrasonic Testing, Radiographic Testing, Magnetic Particle Testing, Penetrate Testing, Eddy Current Testing, Optical Holography, and Microwave Testing. These methods have taken an important part in crankshaft quality control and accident prevention. H

8、owever, on the other hand there are several disadvantages of these methods. Firstly, all of them must find cracks already formed and can not detect unexpected ones. Secondly, they are unable to make on-line detection and fault diagnosis. Thirdly, most of them need surface pretreatment of the facilit

9、ies before inspection. Finally, the accuracy of detection is affected by crankshaft configuration and personal skill. 2.2 Dynamic Diagnosis of Crankshaft Crack At present there are some methods to diagnose shaft cracks on-line: rotor engine vibration displacement method, train wheel shaft temperatur

10、e testing, acoustic emission and tortional vibration signal testing. However, vibration displacement method is unfit for diesel crankshaft crack diagnosis due to the strong vibration from reciprocating movement which makes it difficult to survey displacement and acceleration. Although there is local

11、 high temperature on the cracks, it is hard to inspect the change of the crankshaft temperature due to the high temperature of the lube oil in the diesels. Acoustic emission method is still in developing as great noise from diesel operation makes it difficult to measure high frequency acoustic wave

12、emitted by crack. Therefore at present it is feasible to diagnose crankshaft crack on-line by using torsional vibration signal. 2.3 Crankshaft Crack Diagnosis Using Torsional Vibration Signal Literature 3 brought forward a method using torsional vibration signal detected real-time from diesel to dia

13、gnose crankshaft fault. It studied crack fault diagnosis though measuring the characteristics of the torsional vibration of the shafting flywheel system, and presented that model frequency and damp were sensitive parameters of cracks. The torsional vibration measuring system of the diesel had severa

14、l advantages such as: easy measuring, no direct contact, cheap sensor and longevity. It was a long-term reliable alarm method for diesel shafting crack. Research group in Marine Engine Institute of Jimei University has done the research of internal-combustion engine score fault with intelligent tors

15、ional vibration diagnosis system4, and it was a successful case of on-line fault diagnosis based on torsional vibration signal. 3Metal Magnetic Memory Testing Technique In the year 1997, Russian professor A. A. Dubov brought forward correlative theory of metal magnetic memory on the World Conference

16、 on NDT, developed MMM instruments and formed MMM NDT technique5. 3.1 Theory of Metal Magnetic Memory Testing Under the condition of the existence of the outside magnetic field, usually the magnetic field of the earth, there will appear a phenomenon in the stress concentration zone of ferromagnetic

17、components with load that permeability of material besides the zone reduces and surface leak magnetic field increases, which is called magnetostriction. It will makes the surface magnetic field of the ferromagnetic accessory increase, and the magnetic field can remember the location of disfigurement

18、 and stress concentration zone, thus it is named metal magnetic memory. At present, one of the most popular explanation to the magnetic memory is that, loaded by alternating stresses, unsymmetrical elasto-plastic strain will take place in the magnetic domain formed by spontaneous magnetization in fe

19、rromagnetic material, and then unequal magnetic flux density will be induced by tensile and compressive stress6. Within the magnetic field of the earth, disfigurement and stress concentration zone of ferromagnetic components will produce maximum leak magnetic field, and there will be maximum tangent

20、ial component HpX of the magnetic field intensity and zero normal component HpY. 3.2 Metal Magnetic Memory Testing Instruments and Their Practical Use Research on magnetic memory testing instruments in foreign is in pace with the technological development. Foremost of all were TSC-1M (see Fig. 1), T

21、SCM-2FM and TSC-IM-4 stress concentration magnetic testing instrument developed by Energodiagnostika Ltd. of Russia. These instruments were associated with different types of sensor for various requirements. Software of these instruments for signal analysis and data processing was also developed in

22、Russia. For example, MM-System data processing software produced by Energodiagnostika Ltd. was able to analyze MMM signal and display the signal in three models: 2-D, 3-D and polar coordinates model (see Fig. 2). Internal MMM testing instruments were mainly developed by Eddysun (Xiamen) Electronic C

23、O., LTD. In the year 2000, EMS-2000 metal magnetic memory diagnosis instrument (see Fig. 3) with different types of sensor was produced by the company for ferromagnetic components disfigurement diagnosis. At the same time, M3DPS (see Fig. 4) software for signal analysis and data processing was devel

24、oped to locate early fatigue damage7. Applications of MMM testing in China has developed rapidly focusing on crack testing of steel welding line, pressure vessel, aeronautical structure, thermal power plant and so on. Firstly, in the field of steel material weld testing, it was mainly used for dissi

25、milar steel welding, hull structure steel plate welding8, early diagnosis of welding disfigurement, welding line quality examination, power plant EH oil pipe fillet welding joint, high pressure boiler pipe seat fillet welding joint and so on. Secondly, it was applied in pressure vessel testing for h

26、igh pressure bottle, vessel welding residual stress measurement and so on. Thirdly, it was applied in aeronautical structure testing for earlier disfigurement and plane undercarriage inspection. Fourthly, it was applied in thermal power plant testing for steam turbines component, blades crack, throt

27、tle valve and reheat tube crack diagnosis. 4On-line Diagnosis of Crankshaft Crack Using Metal Magnetic Memory Testing 4.1 Crankshaft Crack Metal Magnetic Memory Testing Marine diesel engine crankshafts are mainly made up from ferromagnetic material. According to MMM theory, stress concentration zone

28、 on crankshaft will produce maximum tangential component HpX of the magnetic field intensity and zero normal component HpY with alternation of symbol. With scanning inspection of the surface magnetic field of crankshaft by MMM testing sensor and instrument, the stress concentration zone will be foun

29、d out according to the zero normal component of the field intensity, and then the existence of crack on the crankshaft can be estimated indirectly. With this method, the location of cracks can be found out without interrupting normal operation of the diesel, and give an alarm in time to remind engin

30、eers of operation condition of the diesel. In the design, the sensor of the instrument will be placed into the body of the diesel through the guide door of the diesel, and it can directly scan zones with the most probable existence of stress concentration, such as locations near oil bore and fillet.

31、 In case the normal component of magnetic field intensity of the location shows a change from positive to negative or from negative to positive, it means that there may be tiny crack or stress concentration taking place, and at the same time, the instrument will record in a log and give an alarm. Th

32、e method is simple, effective and feasible to on- line testing on operating diesel on ships. 4.2 Design for Crankshaft Crack Testing Simulation Experiment In order to put MMM crankshaft crack testing method into practical application to ships, simulation experiment should be done, and the model expe

33、riment platform is built from a two cylinders diesel. The platform takes shaft accessory as the research object, and uses standard ball bearings to support shaft. By means of replacing shaft and bearings, the platform is able to do simulate experiment for shafts in different sharp or length such as

34、roll shaft and crankshaft. The shaft is connected to electromotor by adapting flange, and the motor controlled by transducer can drive the shaft with different rotate speed to simulate running of uniform velocity and accelerated velocity. The bearings are fixed on steel foundation by two bearing sea

35、ts, and the shell on the steel foundation is made up from organic glass to make the observation and the installation of the MMM sensor easy. There is lube oil deposited in the steel foundation and heated up by electro thermal coil. Heated lube oil is pumped to the top of the shell by a small gear oi

36、l pump and injected to shaft and bearings to lubricate them and simulate high temperature in diesel. Then the oil flows into oil sump forming a cycle. The MMM sensor is installed in the sides of the platform body through a probe hole, and its installation angle, depth and horizontal location can be

37、adjusted to scan the magnetic field intension of the whole shaft to find the stress concentration zone. At the same time, stress distribution of diesel crankshaft with crack will be analysized by finite element method software ANSYS and the magnetic field intension model varied with time and tempera

38、ture will also be constructed for calculation. All of these simulations are fundamental to MMM crack testing of crankshaft9. 5Conclusion MMM crankshaft crack testing method is a new technique used for on-line inspection, and there are some issues to deal with in further study. The first one is quant

39、ificational relation between leak magnetic field intension near crack and stress, surrounding magnetic field, and the depth and width of crack10. Secondly, there are several factors having certain impacts to the MMM signal such as temperature, residual magnetic field and surface roughness, therefore

40、, data processing should be done to eliminate these impacts. At present, marine diesel crankshaft crack testing is still being done by means of static method in China. MMM testing may solve the problem of early stress concentration inspection. This method has the advantages as cheap and simple senso

41、rs, measuring without affecting diesel operation and long-term on-line detection. It may forecast stress concentration zone and avoid hidden trouble of crankshaft rupture accident. Combined with torsional signal, MMM testing on-line diagnosis of crack will be achieved. References 1.Peixin Yuan and Heji Yu, Crack Fault Diagnosis in Shaft. Journal of Northeastern University (Natural Science), 1997(1), 12-16 (in Chinese). 2.Wenhu Huang, Songbo Xia and Ruiyan Liu, Theory, Technique and Application of Equipment Fault Diagnosis, Beijing, Academic Publisher, 1996 (