protues7.6 仿真430單片機的步驟!.doc

仿真430單片機！第一步：PROTUES軟件安裝！7.6的版本哦！第二部：IAR軟件設置1：在workspace右擊DUBGE選擇Option選擇芯片，這里選擇MSP430F22742在LINK中添加這段文件-Ointel-standard,(CODE)=.hex -Oraw-binary,(CODE)=.bin-Ointel-standard,(XDATA)=.eep.hex -Oraw-binary,(XDATA)=.eep.bin3，dubgger中選擇軟件仿真第三步：寫程序#include#define uchar unsigned charuchar table=one for all;uchar table1=all for one; #define LCDRW_out_low P4OUT &=BIT1 / 置0 #define LCDRW_out_high P4OUT |= BIT1 / 置1 #define LCDRS_out_low P4OUT &=BIT0 #define LCDRS_out_high P4OUT |= BIT0 #define LCDE_out_low P4OUT &=BIT2 #define LCDE_out_high P4OUT |= BIT2void delay(int m) int t,y; for(t=m;t0;t-) for(y=110;y0;y-); /*1602寫指令子程序，主要學會看時序操作圖！看圖寫程序指令*/void write_cmd(uchar cmd) LCDRS_out_low; /當寫數據時，RS得拉低LCDRW_out_low; /該命令設寫狀態P3OUT=cmd;LCDE_out_high; /開勢能端EN進行數據寫入操作delay(5);LCDE_out_low;/*1602寫數據子程序，主要學會看時序操作圖！看圖寫程序指令*/void write_date(uchar date) LCDRS_out_high; /當寫數據時，RS得拉高LCDRW_out_low; /該命令設寫狀態P3OUT=date;LCDE_out_high; /開勢能端EN進行數據寫入操作delay(5);LCDE_out_low;void init() P3DIR |= 0xFF; P4DIR |= 0X07; P3OUT = 0X00; P4OUT = 0X00; /*1602初始化*/ write_cmd(0x38); /顯示模式設置 write_cmd(0x0F); /顯示及光標設置 write_cmd(0x01); /清屏操作 write_cmd(0x80); /顯示字符位置設置第四步：在PROTUES里面添加HEX文件！在你程序存放的地方有：在Debug/Exe文件夾里找到”.HEX”的文件就OK了！成果展示：void main(void) unsigned int i; init(); delay(10); WDTCTL = WDTPW + WDTHOLD; for(i=0;i11;i+)/寫第一行字符 write_date(tablei); delay(40); delay(100); write_cmd(0x80+