質量保證協議書范本

1、質量保證協議書范本1 、目的：為明確公司（簡稱為甲方）對供應商的質量要求，并為供應商（簡稱為乙方）的產品不合格時，作為處理和索賠的依據。2 、質量要求：2.1 、乙方為甲方提供的產品，其性能必須符合甲方的原材料技術標準或外協件內控標準。2.2、乙方每次送貨時，必須提供物資的合格證或自檢報告等證明物資合格的材料。2.3 、乙方的產品包裝必須滿足甲方要求；包裝必須注明生產日期、生產批號、有效期、重量等。2.4、當甲方的顧客需要到乙方進行驗證時，乙方應給予安排并配合驗證工作。2.5、乙方必須保證百分之百的及時供貨能力。3 、發生不合格的處理：3.1、經甲方驗證不符合原材料技術標準的原材料或不符合外協

2、內控標準的外協件，乙方必須進行退貨，并由乙方負擔甲方的運輸費及試驗費。（運輸費按每斤； 10 元 /10 公里、試驗費按 30 元/100 公斤）。100 公3.2、發現乙方物資不合格時，應及時按甲方提供的信息進行整改，并在15 天內提交給己方整改措施報告，經甲方確認后才能再次送貨。備注：（雖然我公司對關鍵物資、重要物資、一般物資進行性能試驗或檢驗，但在使用過程中如出現質量問題，乙方不能推卸責任，并由乙方負擔全部損失）。乙方負責人簽字（蓋章）：質量保證部簽字（蓋章）：=需方全稱： _（以下簡稱甲方）公司地址： _電話： _傳真 _buyer:moving technology (shen zh

3、en) co., ltd, (abbreviated: party a)add: _tel: _fax: _供方全稱： _ （以下簡稱乙方）公司地址： _seller: dong guan wei hong hareware plastic co., ltd (abbreviated: party b)add: no. 188th, ping shan, tang xia, dongguan citytel: _fax: _產品名稱 : 沙發調節器五金件product name: sofa adjuster hardware parties本協議為采購協議的附件之一，適用于正常采購到貨產品及索

4、賠到貨產品的質量要求，與該協議有同樣的法律效力，甲乙雙方應嚴格遵守。as one of supplementary ofpurchasing agreement, this agreement applies to the quality requirement of normal purchase and claims.甲乙雙方以相互信任、相互合作的態度，對該協議的以下條款達成一致：based onthe mutual trust, mutual cooperation, both parties agree to achieve the agreement as below:產品種類： p

5、roduct codes第一條產品標準 standard乙方應嚴格按照前期甲方測試確認可以接受的樣品性能、以及按照甲方提供的設計圖紙和技術，進行本產品的生產和向甲方批量供貨。party b should provide the goodswhose performance, design, technology parameter are same as the samples confirmed by party a.第二條檢驗方法testing way21樣品封樣：在第一批供貨之前，乙方提供_個產品 / 每個編碼，由甲方研發部、質量檢驗部和乙方共同簽字確認后，作為此產品的封樣樣品，以后的來

6、料檢驗,成品檢驗將以封樣樣品為檢驗的標準之一。sealed sample: before 1st shipment lot,party b should provide _pieces/code samples, which should be approved andsign off by the research & development dept. and quality control dept. of party a and party b, as the sealed samples; the inspection of incoming material and fin

7、ished goods should referring to the sealed samples as the standard.2 2 檢驗標準：以甲方提供的設計圖紙和技術參數規定、封樣樣品、甲方的交驗標準、相關國家標準、甲乙雙方承認的抽樣質量標準為依據進行檢驗。 inspection standard: based on the design drawing, technology parameter, sealed samples,specific inspection standard provided by party a, and approved aql standard b

8、y both parties.第三條信息溝通 communication3 1 甲方在來料檢驗中，發現不合格產品，需對乙方開具供應商質量異常報告，乙方需在 _日內對供應商質量異常報告中質量問題的形成原因、糾正預防措施、措施實施時間等內容，以書面形式進行回復。對于甲方退貨批次，乙方還需向甲方提供退貨批次的處理方式和相關質量記錄。 once party a finds the defects during in-house inspection, will issue the quality exception report to party b, party b shouldreply in w

9、ritten about the defect root, corrective action, improving date,etc.; if goods refund from party a, party b should give the resolving ways and keep a good record.3 2 乙方每月需對甲方來料檢驗、生產制程和客服中心返還的需要索賠的產品進行分析，并在每月 _日前向甲方提供分析報告。party b should monthly analyze theinspection report, production procedure, and

10、claims from party a, and providethe analysis report before_date each month.33甲乙雙方定期召開品質溝通會議，會議時間另由雙方協商確定。both partieswill have the regular quality session, date and time should be confirmed byboth parties.第四條問題解決及違約責任problem resolution and breach responsibility4 1 乙方對本協議第 2,3,4 條所列條款執行不利，且在甲方提出改進要求后

11、乙方仍無改進跡象，甲方有權取消乙方的合格供方資格。 if party b doesn t well cooperate for clause two, three & four in the agreement, still not improve afterrequesting by party a, and party a has the right to cancel the supplier membership.4 2 乙方應保證到貨的型號規格與采購訂單和技術規格書一致，并完全按照技術協議書中的標準供貨。對由于到料與采購訂單和技術規格書中的標準不一致的，甲方有權要求乙方退貨、

12、換貨，并按采購合同的約定承擔相應的賠償責任。party b should guarantee the goods codes and specification are same as requested in purchasing orders and technology specification; if any discrepancy, party a has the right to reject goods, request to change, or compensate according to the purchasing orders.4 3 乙方應承擔交貨至甲方運輸過程中

13、出現的來料損壞、丟失、外包裝破損等損失。party b should undertake the responsibility for any damage, loss of goods during the transportation.4 4 甲方在來料檢驗時對來料批判定為不合格批時，應及時通知乙方，乙方應當在_小時內派人進行確認。party a should notify party b if unacceptable defects and party b shouldassign the relative quality & technology staffs to conf

14、irm, investigate andgive corrective action within_hours in written.45批量供貨時 , 相同物料來料檢驗出現連續批次不合格；制程淘汰率連續_個月超標 / 含等于（ _%）或出現批量質量事件（批次同種故障率>=_ %）或重大質量投訴。乙方產品出現以上任何一種情況，除乙方必須承擔由此造成的一切損失外，甲方尚有權采取庫存相關產品退貨、罰款（訂單金額的_% ）、暫停乙方供貨，限期整改等措施。if the same code products occur the continuous defects, and the percent

15、age ofdefects continuously exceed (including equal to_ %) /month or thedefects>=_% in the same shipment lot or serious quality complaint, party bmust be responsible for all the losses, party a has the right to reject allstock goods, penalty (_% of purchasing amount), stop party b to providegoods,

16、 and request to improve in the limited period.a)如乙方泄漏未經甲方允許私自保留或泄露甲方的機密資料造成甲方經濟損失的, 乙方將承擔因此而產生的所有經濟及法律責任； if party b keep or leak any confidential information without permission from party a, party b shall bear all the economic losses and legal responsibilities.b) 如乙方在向甲方供應的任何材料 , 零部件等中含有有關環境法規規定的對環

17、境有害的材質 , 一經查出 , 乙方供應的任何材料、零部件在終端消費者使用時出現安全問題和對人體產生重大傷害問題 , 乙方將承擔因此事件所產生的所有相關責任和費用 , 并負責賠償給甲方所造成的所有相關損失； if party b supply the spare parts of any materialcontained in the environmental regulations of the materials harmful to the environment, unsafely problem or harmful to human being at end customer,

18、 and party b shall undertake the event of all relevant obligations and compensate for parts of all relevant losses.c) 以上損失在雙方未協商好或未經司法機關裁定前, 以乙方所有貨款暫時作為抵押 ,甲乙雙方將依最后處理結果予以相關責任履行；if any losses mentioned above happen,before the final confirmed settlement can be reached, order payment will beregarded as

19、 the compensation mortgage till good settlement.46 來料檢驗過程中出現以下狀況時：below problems during the inspection:來料批量與送樣不符時：乙方應_日內更換合格物料給甲方，不得延誤甲方生產，如乙方原因導致甲方生產停線將按_元/ 小時的標準賠償甲方停產損失。ifparts are discrepancy as sealed sample, party b should change the qualifiedparts within_days, cant delay party a production li

20、ne; if party aproduction line have to stop caused by party bs unacceptable defects orunqualified parts, party b should compensate party a as rmb_/hour.來料不良導致：problems by defectsa. 雖不造成停產，但將導致甲方本批產品質量降等的，甲方應拒絕本批物料，乙方應及時處理并保證所供物料符合甲方品質要求，同時不阻礙甲方生產則乙方無需賠償。ifany unacceptable parts defects down party a s

21、 final finished goods, party a should reject, party b should improve and provide qualified parts on time, not to delay party a s production line.b. 雖不造成停產，甲方代替乙方挑選使用的，由乙方承擔挑選費用，并無償調換不良品；如乙方派相關人員到甲方配合加工車間挑選，則乙方只用合格品無償更換不良品。if any unacceptable defects from party b, need party a to sort out on-site, pa

22、rty b should bear the rework labor cost, and change the unqualified parts for free; if party b assign workers to sort out defects in party as workingshop; party b also needs to exchange the unqualified parts by using qualified parts.4 7 因乙方產品質量問題，導致甲方用戶多批次投訴，影響甲方產品聲譽的，甲方可要求乙方承擔相應的責任（按當批次產品金額的_%支付給甲方

23、）。 if the endcustomer complaints caused by unqualified parts provided by party b, and down party a s goods reputation, party a has the right to give relative compensation( referring to_% of the lot).4 8 由乙方產品質量問題導致的甲方產品售后出現質量事故，經甲乙雙方調查確認后，乙方應承擔所供甲方的相關產品單價_倍損失。 if the serious qualityissue happens cau

24、sed by parts provided by party b in at end customer, after both parties confirm the issue, party b should compensate referring to_times of products price.4 9 甲方采用乙方產品生產出的成品，可能會接受國家、各地方質量監督部門、特殊客戶等第三方不定期的抽檢，如抽檢中發現由乙方產品未達到國家標準而引起的甲方成品的任何不合格，經甲乙雙方確認后，乙方應承擔第三方的檢驗費用和其他相關費用時甲方保留因此而造成對甲方名譽損害和經濟損失對乙方進行索賠的權利

25、。the final;同finished goods produced by party a may be audited or random inspected by the state, local quality bureau or special customer or the 3rd party, if found unqualified goods caused by parts provided by party b, after both parties confirm the issue, party b should bear the relative testing and inspection fee or other additional fee; at the same time, party a retain the right to claimto a reputation for damages and economic loss.第五條爭議的解決 disputes雙方在履行本協議過程中如發生爭議，應友好協商解決。若協商未成，任何一方均可向甲方所在地有管轄權的人民法院提起訴訟。