智能小車各獨立模塊 紅外遙控 電機驅動 超聲波 紅外尋跡

1、相信進來的都是想學習和制作智能小車的，最近也在學習智能小車，我們的小車功能時紅外遙控小車，小車避障，小車尋跡?，F(xiàn)在將學習過程中所發現的一些比較好的代碼與大家分享，希望能對大家有所幫助。紅外遙控#include <stc15.h>#include <gpio.h>#include <intrins.h>#define uchar unsigned char#define uint unsigned intsbit IRIN = P32; /紅外線一體化接收頭接收端sbit out1=P21;sbit out2=P22;sbit out3=P23;sbit ou

2、t4=P24;sbit out5=P25;sbit out6=P26;sbit out7=P27;sbit out8=P20;uchar IRTemp; /紅外線按鍵數據存放變量uchar IRCOM7=0;/存放紅外解碼后的32位數據void Delay_140us(uchar t) /延時140usuchar i,j;for(j=0; j<t; j+)for (i=0; i<27; i+) _nop_();void Delay_1ms(uint t) /延時1msuint i,j;for(i=0;i<t;i+)for(j=0;j<=100;j+)_nop_();vo

3、id OutsideInit(void) /設置外部中斷初始化EX0 = 1; /開外部中斷0IT0 = 1; /負邊沿觸發EA = 1; /開總中斷void IRReceive(void) interrupt 0 using 2 /設置中斷接收紅外編碼uchar i, j, count = 0;EX0 = 0; /關閉外部中斷1Delay_140us(20);if(IRIN = 1) /確認紅外線信號出現 EX0 = 1;return;while(!IRIN) /等IR變?yōu)楦唠娖剑^9ms的前導低電平信號。 Delay_140us(1); while(IRIN) /等IR變?yōu)榈碗娖剑^4

4、.5ms的前導高電平信號。 Delay_140us(1);for (i=0;i<4;i+) /收集四組數據 for(j=0;j<8;j+) /每組數據有8位while (!IRIN) /等 IR 變?yōu)楦唠娖紻elay_140us(1);while(IRIN) /計算IR高電平時長 Delay_140us(1); count+; if(count >= 30)/計數過長自動離開。EX0=1;return; IRCOMi = IRCOMi >> 1; /數據右移一位，最高位補"0"if(count >=6 ) IRCOMi = IRCOMi

5、| 0x80; /數據最高位或上"1"count = 0; if(IRCOM2!=IRCOM3) /不相等，則紅外遙控解碼錯誤EX0=1;return; EX0 = 1; void Main(void) IRIN = 1; /接收端口初始化OutsideInit(); /初始化外部中斷while (1) if (IRCOM2=0x0c) /按1 out1=0; else out1=1;if (IRCOM2=0x18) /按2 out2=0; else out2=1;if (IRCOM2=0x5e) /按3 out3=0; else out3=1; if (IRCOM2=0x

6、08)/按4 out4=0; else out4=1; if (IRCOM2=0x1c)/按5 out5=0; else out5=1; if (IRCOM2=0x5a)/按6 out6=0; else out6=1; if (IRCOM2=0x42)/按7 out7=0; else out7=1; if (IRCOM2=0x52)/按8 out8=0; else out8=1; 電機驅動#include <stc15.h>#include <intrins.h>#include <gpio.h>#include <595hc.h>#define

7、 unsigned char#define unsigned intuchar pwm=20;uchar pwmh=1;uchar conter=0;uchar m=1;bit sw=1;bit lr=0;sbit ksw=P10;sbit klr=P11;sbit kspu=P12;sbit kspd=P13;sbit m1=P14;sbit m2=P15;void Delay1ms() /11.0592MHz unsigned char i, j; _nop_(); _nop_(); _nop_(); i = 11; j = 190; do while (-j); while (-i);/

8、tms延時void Delayxms (uint t) uchar i; for(i-0;i<t;i+) Delay1ms();void Time0_inti(void) TMOD=0X02; TH0=56; TL0=56; ET0=1; EA=1; TR0=1;void Timer0_int()interrupt1 using 1 counter+; if(counter>pwmh) m=0; if (counter=pwmh) counter=0; m1=1; void main () gpio(); Time0_int(); while (1) if(ksw=0) Delay

9、xms(10); if (ksw=0) sw=sw; while (ksw=0)display(); if(klr=0) Delayxms(10); if (klr=0) lr=lr; while (klr=0)display(); if(kspu=0) Delayxms(10); if (kspu=0) pwmh+; if(pwmh=pwm) pwmh=pwm-1; while (kspu=0)display(); if (kspd=0) Delayxms(10); if (kspd=0) pwmh-; if (pwmh=0) pwmh=1; while (kspd=0)display();

10、 if (sw=0) m1=0; m2=0; Dis_buf0=13; Dis_buf1=13; Dis_buf2=13; Dis_buf3=13; Dis_buf4=13; Dis_buf5=13; Dis_buf6=13; Dis_buf7=13; if(sw=1) Dis_buf0=pwm%10; Dis_buf1=pwm/10; Dis_buf2=12; Dis_buf3=pwmh%10; Dis_buf4=pwm/10; Dis_buf5=12; Dis_buf6=12; if (lr=0) m1=0; m2=m; Dis_buf7=10; if (lr=1) m1=m; m2=0;

11、 Dis_buf7=11; display();超聲波避障#include <stc15.h>#include <intrins.h>#include <gpio.h>#define uchar unsigned char#define uint unsigned intsbit tri=P20;sbit rea=P21;sbit bell=P27;uchar count;bit bell_flag;void Delay12us()/11.0592MHzunsigned char i;_nop_();_nop_();_nop_();i = 30;while

12、(-i);/tms延時void Delayxms (uint t)uint i;for(i-0;i<t;i+)void init()tri=0;TMOD=0X10;TR1=0;TH1=0;TL1=0;uint test_distance()uint date;tri=1;Delay12us();tri=0;while (!rea)TR1=0;date=(uint)(TH1*256+TL1)/10*18;TH1=0;TL1=0;if (date<2000) bell_flag=0;else bell_flag=1;return date;void main ()uint distan

13、ce;gpio();init();while (1) distance=test_distance();dis_duf0=distance%10;dis_duf1=distance/10%10;dis_duf2=distance/100%10+17;dis_duf3=distance/1000%10;dis_duf4=distance/10000%10;display();if(bell_flag)bellbell;else bell=1;Delayxms(30);紅外尋跡#include <REGX52.H> /包含51單片機相關的頭文件sbit LeftLed=P20; /定義

14、前方左側指示燈端口sbit RightLed=P07; /定義前方右側指示燈端口sbit FontLled=P10;sbit LeftIR=P35; /定義前方左側紅外探頭端口sbit RightIR=P36; /定義前方右側紅外探頭端口sbit FontIR=P37; /定義前方正前方紅外探頭端口sbit M1A=P00; /定義左側電機驅動A端sbit M1B=P01; /定義左側電機驅動B端sbit M2A=P02; /定義右側電機驅動A端sbit M2B=P03; /定義右側電機驅動B端sbit B1=P04; /定義語音識識別傳感器端口sbit SB1=P06; /定義蜂鳴器端口vo

15、id tingzhi() M1A=0; /將M1電機A端初始化為0 M1B=0; /將M1電機B端初始化為0 M2A=0; /將M2電機A端初始化為0 M2B=0;void qianjin() M1A=1; M1B=0; M2A=1; M2B=0;void houtui() M1A=0; M1B=1; M2A=0; M2B=1;void zuozhuan() M1A=0; M1B=1; M2A=1; M2B=0;void youzhuan() M1A=1; M1B=0; M2A=0; M2B=1;void delay_nus(unsigned int i) /延時:i>=12 ,i的最小

16、延時單12 us i=i/10; while(-i); void delay_nms(unsigned int n) /延時n ms n=n+1; while(-n) delay_nus(900); /延時 1ms,同時進行補償 void ControlCar(unsigned char ConType) /定義電機控制子程序 tingzhi(); switch(ConType) /判斷用戶設定電機形式 case 1: /前進 /判斷用戶是否選擇形式1 qianjin(); break; case 2: /后退 /判斷用戶是否選擇形式2 houtui(); /M2電機反轉 break; cas

17、e 3: /左轉 /判斷用戶是否選擇形式3 zuozhuan(); /M2電機正轉break; case 4: /右轉 /判斷用戶是否選擇形式4 youzhuan(); /M1電機正轉 /M2電機反轉break; case 8: /停止 /判斷用戶是否選擇形式8 tingzhi();break; /退出當前選擇 void main() /主程序入口 bit RunFlag=0; /定義小車運行標志位 /RunShow=0; /初始化顯示狀態 ControlCar(8); /初始化小車運行狀態 while(1) /程序主循環 Start: LeftLed=LeftIR; /前方左側指示燈指示出前方左側紅外探頭狀態 RightLed=RightIR; /前方右側指示燈指示出前方右側紅外探頭狀態 FontLled= FontIR; SB1=LeftIR; if(LeftIR = 0 && RightIR = 0) /三個紅外檢測到黑線，就前進 ControlCar(1); /左側沒有信號時，開始向右轉一定的角度 delay_nms (10); goto Nex