百樂滿熱水器 故障排除步驟中文英對照

1、-作者xxxx-日期xxxx百樂滿熱水器 故障排除步驟 中文英對照【精品文檔】How to Troubleshoot a Paloma Water Heater Common Issues如何診斷百樂滿熱水器常見問題1Press the "On" button of the remote control to turn the water heater on if there is no hot water. Make sure the hot water faucet is open fully. Turn the water shutoff valve to open

2、it completely.按“上”的遙控打開熱水器如果沒有熱水按鈕。確保熱水水龍頭是完全開放。把水關閉閥完全打開它。2Increase the temperature on the water heater if there is not enough hot water. Ensure the hot and cold water lines are installed correctly. Reverse them, if needed.如果沒有足夠的熱水，熱水器的溫度增加。確保熱水和冷水管道安裝正確。相反，如果需要的話。3Turn the gas valve to open it fu

3、lly if the water is not hot enough.把煤氣閥門打開它完全如果水不夠熱。4Decrease the temperature on the water heater if the water is too hot. Open the water shutoff valve fully.如果水太燙，減少對熱水器的溫度。完全打開水閥。Error Codes錯誤代碼5Turn off the hot water faucet if an error code is displayed on the remote control. Press the "Off&

4、quot; button of the remote to turn off the water heater. Wait five minutes. Turn on the hot water faucet and press the "On" button of the remote. If the error code is still displayed, turn off the faucet, press the "Off" button on the remote and continue to the next step.關掉熱水水龍頭，

5、如果錯誤代碼顯示在遠程控制。按“關閉”按鈕的遠程關閉熱水器。等待五分鐘。打開熱水水龍頭，按“上”的遙控按鈕。如果仍然顯示錯誤代碼，關掉水龍頭，按“關閉”按鈕在遠程和繼續下一步。6Open the gas shutoff valve completely if "11" is displayed on the remote control.打開排氣閥完全如果“11”顯示在遠程控制。7Refill the LP gas container or replace it with a new cylinder when "12" is displayed on

6、the remote control. If you don't have an LP model, contact your utility company. This code indicates that the supply of gas has been interrupted.補充的液化氣容器或更換新的氣缸時，“12”顯示在遠程控制。如果你沒有一個LP模型，聯系你的公共事業公司。這個代碼顯示天然氣供應已中斷。8Open the hot water faucet completely if "15" is displayed on the remote c

7、ontrol. This means there is not enough water volume to trigger the heater to heat the water.打開熱水水龍頭完全如果“15”顯示在遠程控制。這意味著沒有足夠的水量來觸發加熱器加熱水。9Remove any obstructions on the air intake or vent termination if "05" displays on the remote control. This indicates that the air intake is blocked.刪除任何障礙物上的進氣或排氣終止，如果“05”顯示在遠程控制。這表明，進氣受阻。Sponsored Links贊助商鏈接Call for service if "13" or "1L" appears on the display; "1L" indicates lime deposits inside the water heater, while