QualityAgreement質量協議(中英文)解讀

1、量協 議 書Quality Agreementxxxxx公司生效日期：Date of issue:版本：bVers ion : vers ion b協議雙方 Contract Partners甲方：XXX公司Party A:乙方：Party B二、技術要求 Technical Requirements1、如甲方出具圖紙，以甲方的技術圖紙為準，經雙方簽字認可；If Party A is supposed to provide draw in gs; the draw ings should be issued based on the versi on of Party A, and sig n

2、ed and approved by both parties.2、或乙方提供產品規格書，經甲方認可，作為產品的技術要求。If Party B is supposed to provide product specification, the specification can be issued with the con firmati on of Party A.2、或以國際標準或行業標準為依據，經雙方簽字認可。Or based on intern ati onal sta ndards or in dustry sta ndards and sig ned and approved by

3、 both parties.(注：所有技術要求必須經過雙方簽字，并作為質量協議的附件保存)(Note: All technical requirements should be signed and approved by both parties, and saved as annex of quality agreeme nt)本協議附件包括 annex of agreement include:圖紙(編號：)Draw ings (No.)產品規格書(編號：)Product Specificati on (No.)檢驗規范(編號：)In specti on Specificati on (

4、No.)其他(名稱、編號：)Others(No.)三、質量保證 Quality Guarantee1、乙方有義務按國家標準IS09000-2008的要求建立一個質量管理體系，確保未經檢驗合格 的產品不得交付給甲方。PartyB is amenable to establish quality management system according to national standers IS09000-2008 to ensure the rejected product shall not be delivered to the party A.2、甲方并不一定要求乙方一定要通過第三方審核

5、，但鼓勵乙方申請認證審核。Party A does not n ecessarily require but en courage the party B to apply and pass a third party audit ing.3、乙方允許甲方通過審核手段，來檢驗其質量管理是否達到甲方要求。審核可以是對一個體 系、或一個過程、或一個產品進行。Party B allowed Party A use the audit means to inspect whether the quality management meets the requireme nts of Party A.

6、The audit can proceedi ng on a system, a process ing or a product.4、甲方有權隨時對乙方進行不通知的審核，乙方不得拒絕。Party A has authority to audit Party B without notification at any time. Part B cannot deny.四、質量問題的介定及產品質量標準Definition of Quality Issues and Quality Standards of Product1、乙方須保證所提供的產品滿足經雙方確認的圖紙及技術要求。Party B s

7、hould guara ntee the product delivered meet the draw ings and tech ni cal requireme nts which is sig ned and approved by both parties.2、有關訂貨產品的質量標準、技術要求等，雙方在乙方制造訂貨產品前或交貨前，須對以下 圖紙、規格書等進行確認。當技術、質量要求等有新變更時，由雙方協商后進行確認。For quality sta ndards and tech ni cal requireme nts of orderi ng product, both two pa

8、rties shall confirm the follow ing draw ings and specificati ons before manu facturi ng or deliveri ng. Whe n tech no logy and quality requireme nt has cha nges, both two parties should con firm.1）由甲方提供的圖紙、規格書、樣品等Draw in gs, specificati ons and samples provided by Party A.2）由乙方提供的樣品，甲方書面確認的圖紙、規格書、樣品

9、等。Samples provided by Party B, draw in gs, specificatio ns and samples provided by Party A.3、 乙方有責任對交付產品進行適當包裝，包裝應能保證產品在運輸過程中以及甲方在合理的 周轉過程中不易損壞，否則甲方有權判定為不合格并按規定向乙方索賠。Party B is resp on sible for properly package of deliveri ng product; the package shall guara ntee the product un damaged duri ng tran

10、 sportati on and properly tran sfer process of Party A. Or Party A has authority to determine the product the rejected product and claim from Party B according to the releva nt provisi ons.4、驗收規則 Regulation of Inspection4.1交收檢驗由甲方根據經確認的質量標準在甲方廠區進行，但甲方認為有必要時可以安排 在乙方進行，此時，乙方提供必要的配合。Delivery and accept

11、a nee in specti on shall process in the factory of Party A accord ing to the quality sta nders con firmed by Party A. If Party A con siders it n ecessary to process in the place of Party B, Party B is supposed to provide n ecessary cooperati on.4.2交收檢驗按照抽樣計劃執行，檢查水平按照檢驗規范執行。Delivery and accepta nee i

12、n specti on process accord ing to spot-check pla n, in specti on level is based on in specti on sta ndard.五、質量問題的處理Quality Problems Handling1. 乙方接到甲方通報供貨品質異常報告時，應能迅速應對，并滿足甲方的篩選、更換等要求。Party B can response quickly once received quality abnormality from Party A, and meets the requireme nts of scree nin

13、g and replaci ng from Party A.2. 甲方對乙方的供貨驗收不合格時，應及時通知乙方，乙方應在接到通知后兩個工作日內對 品質異常進行調查、分析、處理，以書面的形式通知甲方。Party A should inform Party B timely once Party A deny the delivery acceptanee of Part B, and Party B should inspect, analyze and process the quality abnormality within two workdays and inform the Part

14、y A literally.3. 對于在甲方驗收檢查及后續生產直至最終用戶處發現的不合格品，甲方有權從應付給乙方 的貨款中扣除不合格品造成的損失，如果是預付款，甲方有權要求還款。For the rejected products that occurred in the delivery accepta nee and delivered to customer, Party A has authority to mi nus the cost of rejected products from the payme nt to Party B. If it is adva nee payme

15、nt, Party A has authority to require repayme nt.4. 甲方保管不合格品期間，由于可歸責于乙方的事由導致不合格品的全部或部分損失、損壞 或變質時，該損失由乙方承擔。During the period of Party A keeping rejected products, the total or partial loss, damage and deteriorati on of rejected products that can be attributed to the party B cause, the Party B should b

16、ear the loss.5. 乙方應確保所供物品不會因其不良給甲方的生產活動造成困擾，由于乙方的原因造成的甲 方生產的產品或相關的設備發生不良或損壞以及停產造成甲方不能及時完成客戶訂單時，乙 方應賠償所產生的全部實際損失。Party B should en sure the delivery product wontcause any trouble to the manu facturi ng activity to Party A because of quality abno rmality. The abno rmality or damage of the products man

17、u factured by Party A or releva nt equipme nt and that make Party A cannot complete customesorders caused by Party B is supposed to be compe nsated by Party B.6. 乙方原材料入廠時發生品質異常，因甲方生產急用而被讓步接收或全檢，所產生的額外工時費用由乙方承擔，且篩選的不合格品全部退回乙方處理，工時計費標準為30元/人小時。讓步接收和特采的索賠要求。If raw material occurred quality abno rmality

18、 and was con ducted with con cessi on or full in specti on because of the emerge use for manu facturi ng, the cost of extra work hour should beard by Party B, and all rejected products return to Party B for processing. The standers of work hour is 30RMB/person hour. Requirement of claims of concessi

19、on and special purchase.7. 乙方不得故意將不合格物品混入交驗批中提交給甲方。如有此行為發生，發現一次甲方將 至少處以罰款1000元。Party B cannot mix the rejected products into the in spect ion batch to Party A on purpose. Once it happe ned, Party A have authority to fine Party B at least 1000 RMB for one time.8. 由于乙方提供的物品不合格，甲方要求退貨時，所產生的物流管理費用應由乙方承擔

20、。If the product provided by Party B is not disqualification and Party A need to return, all logistics man ageme nt cost should be un dertake by Party B.9如因乙方提供的物品不合格造成甲方或第三方的產品發生質量問題，從而被第三方索賠時，經甲乙雙方協商或技術監督部門或其他權威機構簽定是乙方的責任時，乙方應承擔甲方乃至 第三方相應的經濟損失。If the disqualificati on of Party B cause the quality a

21、bno rmality of Party A or the third Party, and is claimed for compe nsati on by the third party, after con sultati on by both parties or authe nticate by tech ni cal supervisi on departme nt or other authorities that it is the resp on sibility of Party B, Party B should bear the corresp onding econo

22、 mic losses of Party A and the third party.六、交期保證Delivery Guarantee1、乙方在收到訂單后需對甲方的采購訂單內容進行核對，內容包括物料名稱、規格、數量、 交期。且需在24小時內回傳。如若未回傳，視為默認訂單內容及交期。Party B should check the purchas ing order of Party A once received the order, the in formati on of check in clude the n ame of material, specificatio n, qua n

23、tity and delivery time. The check sheet of order should return to Party A within 24 hours. No returns represe nt Party B already confirm the order and delivery date.2、 訂單回簽后，乙方需嚴守交貨日期，如交貨期延誤，每天以合同總金額的0.5%起進行罰 款。特殊情況需提前7天書面通知甲方，并經過甲方的同意后延遲交貨期，且每月協商延遲交貨筆數不得超過本月總訂單筆數的5%,否則將采取同第2點相同的處罰方式。After the retur

24、n of order, Party B should comply the delivery date strictly. If the delivery date is delayed, Party B should bear a fine of 0.5% of the total amount of the con tract each day. If there is special situati on, Party B should inform Party A for 7 days in adva nee literally, the n the delivery time can

25、 be delayed after permissi on of Party A. The nu mber of delayed orders per mon th cannot exceed 5% of the total orders of this mon th, or the fine of items No.2 will be executed.3、若因乙方原因，到交貨期還無法交貨，且未提前溝通協商的，造成甲方生產停線，將處以 1000元每次的處罰，且所有停線的損失工時由乙方承擔。If for Party Bs cause, the product cant be delivered

26、 on time without any com muni cati on and n egotiati on before, leadi ng to the manu facture line stopped; un der this situati on Party B should bear a fine of 1000RMB per times and all the work hour losses caused by stop line.4、 乙方交貨后經甲方檢驗不合格，乙方必須在24小時內至交貨地址全檢處理或者全部退貨。 如果退貨則要求乙方在2天內補齊貨物發至甲方工廠，若未按此要

27、求執行，同樣視為延遲交 貨。將按照上述第3點執行。If the products provided by Party B are disqualificati on. Party B should be in the delivery in spect ion place or return the goods within 24 hours. If the product is supposed to return. Party B should suppleme nt the products and send it to the factory of Party A withi n tw

28、o days. If this requireme nt is not executed, it also deemed to be delayed delivery, and should be executed based on items No.3.5、甲方根據質量協議上的檢驗標準進行驗收，如乙方評估預知無法達到品質保證程度，應事 先增加產量并全檢良品后再出貨.Party A ought to accept the products accord ing to the in spect ion sta nders on quality agreeme nt. If Party B has

29、 estimated the products cannot meet the rank of quality guarantee, Party B should in crease the output and clear the goods after complete in spect ion.6、乙方所有材料或工藝等變化都必須立即通知甲方，并經甲方同意后方能投入使用，未經確 認的變更所引起的一切責任由乙方承擔！Any changes of material or craft should inform Party A, and can be applied after Party As

30、 permissi on. All con seque nee that cause of uncon firmed cha nges should un dertake by Party B!7、 所有來料需有送貨單，并在外箱和最小包裝上貼有物料標識卡.送貨單和標識卡上須清晰注 明供貨廠商、與甲方訂單相符的產品編號、產品名稱、數量、生產日期等 ，否則甲方有權拒 收，由此引發的交期延誤等損失由乙方全額賠付.All incoming materials should have delivery no te. Material ide ntificati on card should be pas

31、ted on outer carton and mi nimum packagi ng; delivery n ote and ide ntificati on card should in dicate the n ame of supplier, ide ntificatio n of product n ame,a nd qua ntity manu facture date)f product clearly. Or Party A has authority to deny the products. The delivery and losses caused by this si

32、tuati on should all un dertake by Party B.七、變更，異常時的聯絡Contact of Change and Abnormity1、乙方作出下列變更時應征得甲方的認可和同意，并保證所作出的變更不會影響所供物品的質量技術指標。Party B should get permission of Party A when following changes are made, and to ensure the cha nge wont in flue nee the quality tech ni cal sta nders of product:1)給甲方交

33、貨開始后，訂貨物品的設計變更；Change of desig n of product once the delivery bega n;2）制造訂貨物品新造模具時，或使用中改造、修理模具時；During the process ing of manu facturi ng the new mould of product, or duri ng the using of cha nging and fixing the mould;3）訂貨物品的制造方法、工藝過程發生變更時；When the manu facturi ng method and craft process has cha n

34、ged;4）材料的制造商和供應商有變更時。Whe n the manu facturer and supplier of material have cha nged.2、甲方由于自身理由要求變更時，應立即以書面形式通知乙方，甲乙雙方在協商的基礎上 實施變更。變更物料需提供要求的檢測報告，第一次變更物料來料時需有易于識別的標識。If Party A need to change the specification for own reason. Party A is supposed to inform Party B immediately and literally. The change

35、 can be executed with the negotiation of both parties. The cha nging material should have corresp onding in specti on report, and the first cha nging of incoming materials should have obvious mark to inden tify.3、訂貨物品由于已定的協議例如質量特性、期限、發貨數量等明顯地不可能做到，設計或 制造工程不合格，預想或已發生了與質量要求不符或其他質量異常時，乙方應立即與甲方 書面聯絡，且由乙

36、方立即調查產生的原因，及預防糾正措施對策，報甲方認可后實施。If the ordered products cantmeet the items in agreement such as quality, delivery timequantity, or the design and manufacture is disqualification, and the quality abnormality has been predicted or occurred, Patty B should con tact Party A immediately and literally, Part

37、y B is resp on sible for survey of reas on and corrective preve ntive measureseport to Party A after the approval of Party A.4、 未經確認的變更所引起的一切責任由乙方承擔！Any uncon firmed cha nged that cause losses should be un dertake by Party B!八、一般事宜 General Matters1有效期限Expiry本協議一經雙方簽字蓋章后即生效，則此前雙方所簽的所有此類協議作廢。This Agre

38、eme nt shall become effective upon the sig nature and seal of both parties, the n all such agreeme nts sig ned by both parties are void.本協議在雙方購銷關系存續期內有效，直至更新版本的質量協議書生效時止。This agreeme nt is valid for the durati on of the relati on ship betwee n the two parties un til new versi on of quality agreeme nt come into effect.2、協商解決 Negotiation對本協議未作規定的事項及相關內容產生疑義或異議時，甲乙雙方竭誠協商解決。協商不成，可提交第三方仲裁機構仲裁或遵循司法途徑解決。For any doubt or agreement related to unspecified issues in agreement, both parties should settle them by negotiation. In case no settlement can be reached between the two partie