2016年11月全國系主任技術05cfd流體分析培訓例題

midasmidasCFD 概概2D2D2D ②①點擊②①點擊②點擊 步01.

①①①選擇②選擇①選擇②選擇N-m-kg-sec-③③ 步01.

①①鼠標模型窗②點擊② ①點擊①點擊②點擊CADParasolid(10to22)nastranfx申請.①②③⑤④

①點擊動態/①點擊動態/傳熱/CFD②點擊流體②③④

輸入輸入③點擊②③

①點擊①點擊

①點擊①點擊②③選擇④點擊CFD⑤點擊⑥點擊 ③⑥⑤⑥

①點擊①點擊③選擇幾何上的一條線:已選擇條④勾選-Vy⑤點擊②③④⑤⑥ ⑥

①①選擇②③選擇圖示3個目④點擊確② ④③④

①點擊壓力按鈕①點擊壓力按鈕③選擇左下角的幾何點④點擊④②④

①點擊①點擊②點擊③④⑤⑥單元類型:⑦:⑧點擊⑨點擊②③④⑥ ⑧

①點擊①點擊穩態⑤點擊②③④⑤

④點擊②③④ ①點擊①點擊②點擊01_2d_④點擊②③④ ①點擊①點擊②點擊② ①點擊①點擊②點擊工 樹的擴展按③CFD:INCR=0004(TIME=2)③①

①點擊①點擊②點擊② 概概3D3D對于前面分析的2（(2D Flow)）在3維必須先學習 ②①點擊②①點擊②點擊 ①①①選擇①選擇③點擊③③ ①①鼠標模型窗②點擊②

CAD①點擊①點擊②點擊CADto22)Filesnastranfx申請.②⑤④

①點擊動態/①點擊動態/傳熱/CFD②點擊流體②③④

輸入輸入③點擊②③

①點擊①點擊

①點擊①點擊②③選擇④點擊CFD⑤點擊⑥點擊②③④③⑥⑤⑥ ②點擊②點擊③點擊④確認出現①②②③

①①②③④激活Vx輸入⑤激活⑥激活⑦點擊②③④⑤⑥⑦ ⑦

③點擊④點擊③④

①點擊①點擊-x面x面面④點擊選擇圖中所示的3個②④④

①點擊①點擊③選擇左下角的幾何邊④點擊②④③④

①點擊①點擊②點擊③④⑤點擊⑥:⑦點擊⑧點擊②③④⑥⑦⑤⑧

①點擊①點擊②點擊③④:瞬態⑤點擊②③④⑤

①①②③間隔④激活–面⑤Y⑥點擊②③ ⑥ ①點擊①點擊②點擊02_3d_④點擊②③④ ①點擊①點擊②點擊② ①點擊①點擊②點擊工 樹的擴展按③CFD:INCR=0010(TIME=0.5)雙擊③①

①點擊①點擊③點擊④選擇相應節點⑤點擊②④⑤

①點擊①點擊②拖動箭頭選擇剖面③點擊④點擊⑤點擊③④⑤② 概概2D2D nastranfx申請.2DVortex ②步②步01.①[文件]②[新建]①[文件]②[新建]①2DVortex 步步01.①選擇①選擇②選擇N-m-kg-sec-③點擊sec-J單位系.整到N-m-kg-sec-J單位系.③①2DVortex 步步01.①在工作平面點擊鼠標右鍵②選擇①在工作平面點擊鼠標右鍵②選擇①②2DVortex ①選擇①選擇②選擇③打開邁達斯公司提供的TrainingSeriesCAD文件Parasolid(10to22)nastranfx申請.①②⑤④2DVortex 2DVortex ③④③④①②①②①點擊靜態/②點擊創建流體2DVortex 輸入1(如圖所示輸入③點擊①②③2DVortex ①單擊①單擊①2DVortex ③⑥②④⑤③⑥②④⑤①①①點擊②③選擇④點擊CFD⑤點擊⑥點擊2DVortex ①①①點擊②③④速度組成-Vx:選擇⑤勾選-⑥速度組成-Vy:選擇⑦點擊②③③⑤②③③⑤⑦①點擊①點擊③選擇幾何上下兩條邊④勾選-⑤勾選-⑥點擊②④ ⑥2DVortex ①②①②③④壓力組成:選擇⑤點擊②④⑤①③③2DVortex ①①2④點擊④③②③2DVortex④③②③2D2DVortex②③④⑤②③④⑤①④選擇如圖所示的兩條線④③⑤④③⑤①②①②①點擊②點擊③:④⑤點擊2DVortex ⑥④⑦⑥④⑦⑩ ⑨①②①②①點擊②點擊③④⑤⑥勾選⑦單元類型:⑧:⑨點擊⑩點擊③2DVortex ③①②①②①點擊②點擊③④:瞬態⑤點擊連接下③④⑤2DVortex③④⑤①①②③④⑤點擊⑥⑦點擊⑧點擊①② ⑦⑤⑧2DVortex ①點擊②①點擊②點擊③④點擊②③④2DVortex ②②①①①點擊②點擊2DVortex ①點擊②①點擊②點擊工 樹的擴展按③CFD:INCR=0001(TIME=60)④點擊⑤點⑥點擊④⑥①2DVortex ②點擊②點擊④點擊模型上任意節點③②④⑤⑥2DVortex ①②按住Ctrl鍵選擇節點③④⑤圖像-Y軸⑥①

④③⑤2DVortex 概概3D3D間存在物時流體的擾動現象.必須先學習2維渦流分析(2DVortexShedding查看對稱模型3DVortex ②步②步01.①點擊①點擊②點擊①3DVortex 步步01.①選擇①選擇③點擊kg-sec-J單位系.N-m-kg-sec-J單位系.但是③①3DVortex 步01.

①①鼠標模型窗②點擊②3DVortex 導入①點擊①點擊②點擊CADParasolid(10to22)Files文件⑤選擇nastranfx申請.②⑤④3DVortex 3DVortex ③④③④①②①②①點擊動態/傳熱/CFD②點擊流體3DVortex ①質量密度:①質量密度:輸入②粘性:輸入③點擊①②③3DVortex ①點擊①點擊①3DVortex ③⑥③⑥①①③選擇④點擊CFD②④⑤3DVortex ②點擊鼠標右鍵②點擊鼠標右鍵③選擇④選擇③④3DVortex ⑦⑦①①①點擊②③選擇幾何2個面（如圖所示④速度組成-Vx:選擇⑤勾選-⑥速度組成-Vy:選擇⑦勾選-⑧速度組成-Vz:選擇⑨點擊②③⑤②③⑤⑦①點擊②③選擇幾何2個面（如圖所示④勾選-⑤勾選-⑥點擊①③③②④⑤⑥3DVortex ①①②③④壓力組成:選擇⑤點擊①②④③③⑤3DVortex ①①④點擊④②③3DVortex ④②③3D3DVortex④⑤③④⑤③⑥①②①②①點擊②點擊③④選擇幾何形狀中對稱面上的3線⑤選擇幾何形狀中對稱面上的3線⑥點擊3DVortex ④④①點擊①點擊②點擊③:④選擇6個目標（如圖所示⑤點擊①②③⑤3DVortex ①點擊②①點擊②點擊③選擇1個幾何體（如圖所示④⑤⑥勾選⑦:⑧點擊⑨點擊②⑥③④⑤⑨3DVortex ①點擊①點擊②點擊③④:瞬態⑤點擊連接下①②③④⑤3DVortex ①①②③④⑤勾選對稱面⑥對稱平面-Z位置:⑦點擊⑧速度-V1⑨點擊⑩點擊①②③④⑤⑥⑦⑩⑧⑨3DVortex ①點擊②①點擊②點擊③④點擊②③④3DVortex ②②①①①點擊②點擊3DVortex 3DVortex ①3DVortex ①點擊②①點擊②選擇對稱面（如圖所示③點擊③②3DVortex ①點擊①點擊②選擇③點擊①②③3DVortex 概概2D2D 2DFluidHeat ②步②步01.①點擊①點擊②點擊①2DFluidHeat 步步01.①選擇①選擇③點擊③①2DFluidHeat 步01.

①①鼠標模型窗②點擊②2DFluidHeat 導入①點擊①點擊②點擊CADParasolid(10to22)文nastranfx申請.②③③⑤④2DFluidHeat 2DFluidHeat ②②①選擇動態/傳熱/CFD①選擇動態/傳熱/CFD②選擇函數—CFD③名稱輸入輸入0.1*tm的意義如下式所示.floatability0.1×溫度midasNFX-CFDtm代表溫①③④⑥2DFluidHeat ③④③④①②①②①點擊動態/傳熱/CFD②點擊流體2DFluidHeat ①①:輸入②③④熱導率：輸入⑤流動率：選擇⑥點擊①②③④⑥2DFluidHeat ⑥①點擊①點擊①2DFluidHeat ③⑥③⑥①①①點擊①點擊②③選擇④點擊CFD⑤點擊⑥點擊②④⑤2DFluidHeat ④④①①①點擊②③選擇幾何上的一條線:已選擇條④溫度:輸入⑤點擊②③⑤2DFluidHeat②③⑤①①①點擊③選擇幾何上的一條線:已選擇條④點擊②③④2DFluidHeat②③④①①③選擇圖示4④點擊③②③③③④2DFluid③②③③③④

④①點擊壓力按鈕④①點擊壓力按鈕③選擇左下角的幾何點④點擊②③②③ 2D2DFluidHeat ①點擊①點擊②點擊③④⑤⑥單元類型:⑦:⑧點擊⑨點擊①②④⑥⑨⑤⑦⑧③2DFluidHeat ②②①點擊②點擊③④:穩態⑤點擊③④⑤2DFluidHeat③④⑤①勾選①勾選步驟數:輸入100②點擊①②③④2DFluidHeat ①點擊②①點擊②點擊③④點擊②③④2DFluidHeat ②②①①①點擊②點擊2DFluidHeat ①點擊①點擊②點擊工 樹的擴展按③CFD:INCR=0004(TIME=2)①2DFluidHeat ①CFD①CFD:INCR=0004(TIME=2)①2DFluidHeat 概概 2DSolidHeat

②步②步01.①點擊①點擊②點擊①2DSolidHeat 步步01.①選擇①選擇③點擊kg-sec-J單位系.N-m-kg-sec-J單位系.但是③①2DSolidHeat 步01.

①①鼠標模型窗②點擊②2DSolidHeat

導入CAD①點擊①點擊②點擊CADParasolid(10to22)文nastranfx申請.②⑤④2DSolidHeat 2DSolidHeat ③④③④①②①②①點擊動態/②點擊流體2DSolidHeat ①選擇①選擇②點擊②2DSolidHeat ①點擊①點擊①2DSolidHeat ③⑥③⑥①①①點擊①點擊②③選擇④點擊CFD⑤點擊⑥點擊②④⑤2DSolidHeat ④④①點擊①點擊②③選擇幾何上的一條線:已選擇條④溫度:輸入⑤點擊①②③⑤2DSolidHeat 溫度:輸入①③②④⑤2DSolidHeat 2D2DSolidHeat ①點擊①點擊②點擊③④⑤⑥單元類型:⑦:⑧點擊⑨點擊③①②④⑨⑤⑥⑦⑧2D①②④⑨⑤⑥⑦⑧①②①②①點擊②點擊③④:瞬態⑤點擊③④⑤2DSolidHeat③④⑤①取消勾選①取消勾選②勾選③時間增量：輸入④⑤點擊①②③④⑤2DSolidHeat ①點擊②①點擊②點擊③x④點擊②③④2DSolidHeat ②②①①①點擊②點擊2DSolidHeat ①點擊①點擊②點擊工 樹的擴展按③CFD:INCR=0004(TIME=25)③①2DSolidHeat 概概 2DConjugateHeat

②步②步01.①點擊①點擊②點擊①2DConjugateHeat 步步01.①選擇①選擇③點擊③①2DConjugateHeat 步01.

①①鼠標模型窗②點擊②2DConjugateHeat

①點擊①點擊CADParasolid(10to22)文nastranfx申請.②⑤④2DConjugateHeat 2DConjugateHeat ②②①動態①動態/傳熱/CFD②③CFD④⑤⑥單擊①③④⑥2DConjugateHeat ③④③④①②①②①點擊動態/傳熱/CFD②點擊流體2DConjugateHeat ①質量密度①質量密度:輸入②③:1輸入④⑤⑥點擊①②③④2DConjugateHeat ①②①②固體2DConjugateHeat 輸入②比熱輸入輸入④點擊①②③④2DConjugateHeat ①點擊①點擊①2DConjugateHeat ③⑥②④⑤③⑥②④⑤①①①點擊②③選擇④點擊CFD⑤⑥點擊2DConjugateHeat ⑦⑧②③⑤⑦⑧②③⑤④⑥①①①點擊②點擊向下箭頭③選擇④點擊⑤2D⑥材料:3:CFD⑦點擊⑧點擊2DConjugateHeat ④④3輸入⑤點擊①③②⑤2DConjugateHeat :3④點擊①③②④2DConjugateHeat ①選擇右側的2D①選擇右側的2D②單擊鼠標右鍵①②2DConjugateHeat ③選擇圖示4④點擊②③④④2DConjugateHeat ④④①點擊壓力按鈕①點擊壓力按鈕③選擇左下角的幾何點④點擊②③2DConjugateHeat ①單擊鼠標右鍵①單擊鼠標右鍵①②2DConjugateHeat ①①②③④⑤⑥單擊①②⑤③④⑥2DConjugateHeat①點擊①點擊②點擊③④⑤⑥單元類型:⑦:⑧點擊⑨點擊①②④③⑥⑨ ⑧2DConjugateHeat ①②①②①點擊①點擊②點擊③④⑤⑥單元類型:⑦:⑧點擊⑨點擊③④⑥⑨⑤⑦⑧2DConjugateHeat ②②①點擊①點擊瞬態⑤點擊③④⑤①①②③④⑤⑥單擊①②③④⑤⑥2DConjugateHeat ①點擊②①點擊②點擊③④點擊②③④2DConjugateHeat ②②①①①點擊②點擊2DConjugateHeat ①點擊①點擊②點擊工 樹的擴展按③CFD:INCR=0004(TIME=10)③①2DConjugateHeat ①CFD①CFDINCR=0004(TIME=10)③①2DConjugateHeat 概概 必須先學習2維固體熱傳遞(2DSolidHeatTransfer) 3DSolidHeatTransferwith

②步②步01.①點①點擊②點擊①3DSolidHeatTransferwith 步步01.①選擇①選擇③點擊③①3DSolidHeatTransferwith 步01.

①①鼠標模型窗②點擊②3DSolidHeatTransferwith 導入①點擊①點擊②點擊CADParasolid(10to22)文nastranfx申請.③⑤④3DSolidHeatTransferwith 3DSolidHeatTransferwith ③④③④①②①②①點擊動態/傳熱/CFD②點擊流體2DConjugateHeat 輸入②比熱輸入輸入④點擊①②③④2DConjugateHeat ①①①2DConjugateHeat ⑧②④⑧②④⑤③⑥⑦①①①點擊②③選擇④點擊CFD⑤名稱：3D⑥材料：3：CFD⑦點擊⑧點擊2DConjugateHeat ③選擇④如圖所示①②③3DSolidHeatTransferwith ③選擇圖示的邊④單擊①②②③④④3DSolidHeatTransferwith ②②③②②③③④④①①③選擇圖示的邊⑤單擊3DSolidHeatTransferwith ①①②選擇所有的幾何體②3DSolidHeatTransferwith

①定義手動接觸對①定義手動接觸對②選擇③接觸類型：固-固⑤單 樹下面的模⑥選擇⑦選擇⑧單擊–(CFD)接觸面定義接⑦②③④⑤3DSolidHeatTransferwith ①①②③④⑤單擊④①③②⑤3DSolidHeatTransferwith ①右擊鼠標右鍵②顯示①右擊鼠標右鍵②顯示①②3DSolidHeatTransferwith ②如圖所示②如圖所示②3DSolidHeatTransferwith ⑦⑦①點擊①點擊②點擊③④⑤⑥⑦:⑧點擊⑨點擊①②⑥④⑧⑤⑨③3DSolidHeatTransferwith ③①點擊①點擊②點擊③④⑤⑥⑦⑧:⑨點擊⑩點擊①②③⑦④⑤⑧⑥⑨3DSolidHeatTransferwith ②②①點擊瞬態⑤點擊①點擊瞬態⑤點擊③④⑤①①:②③:選擇定義CFD④名稱⑤表達⑥⑦time⑧⑨最大迭代:⑩單擊①②④⑤③⑥⑧⑨⑦⑩3DSolidHeatTransferwith ①點擊②①點擊②點擊③④點擊②③④3DSolidHeatTransferwith ②②①①①點擊②點擊3DSolidHeatTransferwith ③①點擊③①點擊②點擊工 樹的擴展按③CFDINCR=0001(TIME=1e+050)-度①3DSolidHeatTransferwith 遞(2DSolidHeatTransfer)3概遞(2DSolidHeatTransfer)3概

②步②步01.①[文件]①[文件]3DSolidHeatTransferwith

步步01.①選擇①選擇③點擊③①3DSolidHeatTransferwith

步步01.①鼠標①鼠標模型窗②點擊②3DSolidHeatTransferwith

②點擊②點擊CADParasolid(10to22)Filesnastranfx申請.⑥④⑤3DSolidHeatTransferwith

3DSolidHeatTransferwith

①②①②①點擊②點擊固體③④3DSolidHeatTransferwith③④

輸入輸入輸入④點擊①②③④3DSolidHeatTransferwith③④

①點擊①點擊①3DSolidHeatTransferwith

①①①點擊②③選擇④點擊CFD⑤點擊⑥點擊⑦②④③⑤⑥3DSolidHeatTransferwith⑦②④③⑤⑥

①①①點擊3DSolidHeatTransferwith

①①①點擊③選擇圖示對象④點擊③②④3DSolidHeatTransferwith③②④

①點擊②:選擇③④:輸入⑤⑥點擊⑥?①⑥?①②④⑤:對流系數反應熱流:輸入對流系數本例題中室外溫度20℃,對流系數3DSolidHeatTransferwith3D3DSolidHeatTransferwith①②①②①點擊②點擊③④⑤⑥勾選⑦點擊⑧點擊③④⑥⑦⑤⑧3DSolidHeatTransfer③④⑥⑦⑤⑧

②②①點擊②點擊③④:輸入瞬態⑤點擊連接下③④⑤3DSolidHeatTransferwith③④⑤

①勾掉①勾掉②勾選③④:輸入⑤⑥:輸入⑦點擊⑧點擊①②③④⑤⑧⑥⑦3DSolidHeatTransferwith

①點擊①點擊②點擊③④點擊②③④3DSolidHeatTransferwith

①①①點擊②點擊②3DSolidHeatTransferwith②

①點擊①點擊case1：瞬態③點擊CFD:②③①3DSolidHeatTransferwith

概概水和空氣的邊界面.流體Dam

②步②步01.[[文件[新建①Dam

步步01.①選擇①選擇③點擊①③Dam

步01.

①鼠標①鼠標模型窗②點擊②Dam

①點擊②點擊①點擊②點擊CAD④選擇Parasolid(10to⑤選擇nastranfx申請.②⑤④④Dam

Dam

①②①②①點擊動態/傳熱/CFD②點擊流體③④Dam③④

①①②質量密度:輸入③④點擊①②③④Dam④

①點擊①點擊①Dam

①①①點擊②③選擇④點擊CFD⑤點擊⑥點擊③⑥④⑤②Dam③⑥④⑤②

①①①點擊②點擊向下箭頭③選擇④點擊⑤:選擇⑥點擊⑦點擊③⑥②④⑤Dam③⑥②④⑤

①①①選擇②選擇③選擇圖示目標選擇⑤點擊②⑤③Dam②⑤③

DamDam①點擊①點擊②點擊輸入④選擇圖示目標⑤點擊①②③⑤④Dam

①點擊①點擊②點擊③④⑤12D⑥⑦⑧取消:高階單元⑨點擊⑩點擊①②④⑤⑦③⑩⑥⑨Dam

①點擊①點擊②點擊③④⑤22D⑥⑦:選擇⑧:⑨點擊⑩點擊?點擊①②③④⑤⑦⑩⑥⑧⑨Dam

①點擊①點擊②點擊③④:瞬態⑤點擊連接下②③④⑤Dam

①點擊①點擊②選擇③點擊④⑤⑥⑦⑧連接下②①③④⑤⑥⑦⑧Dam

①②①②點擊CFD③9.8*(.025-y))else(0)end④點擊⑤⑥:表達:⑦點擊⑧:⑨⑩點擊⑧②③④⑤⑥⑦⑨①⑩Dam

①點擊①點擊②湍流模型:③:④:輸入⑤包含靜壓選項:⑥:⑦:選擇⑧點擊①②③⑤⑥④⑦⑧Dam

①點擊①點擊②點擊④點擊①②③④Dam

①點擊②點擊①點擊②點擊①②Dam②

①點擊②①點擊②點擊模型樹中的③點擊CFD:④點擊⑤點⑥點擊⑤⑥⑤④①Dam

①①Case1②點擊③選擇④勾選⑤點擊查看級別組③①④②⑤Dam

CFDCFD所對應的級別組②點擊③點擊①④②③Dam③

概概學習物體在移動過程中邊界件也在移動時的一種激活網格變形模定義移動壁面邊界條應用領Moving

②步②步01.①點擊①點擊②點擊①M(fèi)oving

步步01.①選擇①選擇③點擊①③Moving

步01.

①鼠標①鼠標模型窗②點擊②Moving

①點擊②點擊①點擊②點擊CAD(10to22)nastranfx申請.②③⑤④Moving

Moving

①②①②①點擊③點擊向下箭頭流體③④2DVortex③④

輸入輸入③點擊①②③2DVortex③

①點擊①點擊①2DVortex

①①①點擊②③點擊④選擇CFD⑤點擊⑥點擊③⑤⑥②④2DVortex③⑤⑥②④

①①①點擊①點擊②:選擇③④Vx:選擇⑤Vy勾選⑥Vy:選擇⑦點擊③③⑤⑦M(jìn)oving

①點擊①點擊②:輸入速度-③④Vx勾選⑤Vy勾選⑥點擊①②④⑤⑥Moving

①點擊①點擊②:輸入壓力-③④:選擇⑤點擊①③②③④⑤Moving

②③③①②③③①①點擊輸入線壁-③選擇圖示目標對象④勾選⑤點擊④Moving④

①①①點擊①點擊CFD輸入輸入-⑤點擊⑥勾選⑦選擇⑧選擇⑨點擊⑩點擊-1.0*t式translation=-1.0×?xí)r間⑥⑦⑧③⑤②⑨⑩Moving⑩

①選擇運動-①選擇運動-②點擊①②Moving

MovingMoving①②①②①點擊②選擇輸入④選擇圖示目標⑤點擊④③⑤2DVortex④③⑤

②④③⑤②④③⑤①①點擊②點擊輸入④選擇圖示目標⑤點擊2DVortex

①點擊①點擊②點擊③④⑤⑥勾選⑦單元類型：選擇⑧勾選⑨點擊⑩點擊①②⑥③④⑦⑩⑤⑧⑨2DVortex

①點擊①點擊②點擊③:輸入④:選擇瞬態⑤點擊連接下①②③④⑤2DVortex

①點擊①點擊②勾選③點擊④:輸入⑤⑥:輸入⑦⑧點擊②①④⑤③⑥⑦⑧Moving

①點擊①點擊②點擊④點擊①②③④Moving

①①①點②點擊②Moving②

①點擊①點擊②右擊分析工 樹③CFDINCR=0001(TIME=60)④⑤點 按⑥③⑥ ①M(fèi)oving

具有液體的產品的移動的情況,.需要事先學習DamBreak和MovingCylinder)兩個案例概

②步②步01.①選擇①選擇②點擊①步步01.2D2D②選擇N-m-kg-sec-③點擊③①步步01.②點擊②點擊①②①點擊①點擊②點擊“導入”，找到相應文件to22)Files④選擇nastranfx申請.①②⑤④③④③④①②①②①點擊動態/傳熱/CFD②點擊③點擊向下箭頭流體2DVortex ①選擇材料①選擇材料②點擊②①點擊①點擊①③⑥②④⑤③⑥②④⑤①①①點擊②③選擇④點擊CFD⑤點擊⑥點擊2DVortex

①點擊①點擊②③選擇模 的17個對④壁類型:⑤勾選⑥點擊③②③⑤⑥④③⑤④③⑤①①①點擊①點擊②點擊③④⑤點擊⑥勾選⑦選擇⑧流動函數選擇⑨重心輸入0,-⑩點擊?點擊⑨?⑥⑦②⑧⑩①選擇運動-①選擇運動-②點擊①②③④③④③⑤①②①②④選擇如圖16④③⑤④③⑤①②①②①點擊②點擊④選擇如圖7⑤點擊⑥③⑦⑥③⑦④⑧⑨?⑤⑩①②①②①點擊②點擊③④⑤點擊⑥激活⑦提煉系數⑧單元類型:⑨取消：⑩點擊?點擊①點擊①點擊穩態⑤點擊①②③④⑤①點擊①點擊②激活：③激活：④點擊⑤⑥⑦⑧⑨點擊②③①④⑤⑥⑦⑧⑨⑤⑥⑤⑥⑦②③④⑧②③④⑧⑨⑩?①?①點擊②③輸入表達式:9.81*(0.03-④點擊⑤⑥輸入表達式:⑦點擊⑧選擇⑨⑩?選擇?點擊①選擇①選擇②激活：③0④激活：包 ⑤激活：⑥選擇⑦點擊 ④⑤⑥⑦①點擊①點擊②點擊④點擊①②③④②②①①①點擊②點擊③③④④①選擇①選擇②點擊③CFD:INCR=0001(TIME=60)④選擇⑤點擊⑥⑦②⑦⑤①M(fèi)oving 概Species Species ②步②步01.①點擊①點擊②點擊①Species 步步01.①選擇①選擇③點擊③①Species 步01.

①①鼠標模型窗②點擊②Species 導入①點擊①點擊②點擊CADParasolid(10to22)文⑤選擇nastranfx申請.②⑤④Species Species ③④③④①②①②①點擊動態/傳熱/CFD②點擊流體Species 輸入②質量密度:輸入:輸入④點擊①②③④Species 流體①②Species 輸入②質量密度:輸入:輸入④點擊①②③④Species ①點擊①點擊①Species ③⑥②④⑤③⑥②④⑤①①①點擊②③選擇④點擊CFD⑤點擊⑥點擊Species ③②④⑤③②④⑤⑦⑥①①①點擊②③選擇④點擊CFD⑤3:⑥點擊⑦點擊Species ⑦②③④⑦②③④⑤⑩①①②創建speciesSeperation函⑩確認(1)else(0)endif函數是指以⑧⑥Species ⑧⑥④⑤④⑤①點擊①點擊②③④變量定義:⑤點擊⑥點擊①②⑥③Species ①定義組分濃度①定義組分濃度2輸入⑤點擊①③②⑤Species ①①①定義組分濃度2輸入⑤點擊③②④⑤Species③②④⑤SpeciesSpecies ④⑤?④⑤?⑥①點擊①點擊②點擊③④大小:輸入⑤1:2D⑥⑦2D網格:⑧⑨:⑩點擊?點擊①②③⑦⑧⑨⑩Species③⑦⑧⑨⑩④⑤?④⑤?⑥①點擊①點擊②點擊③④大小:輸入⑤22D⑥⑦2D網格:⑧⑨:⑩點擊?點擊①②③⑦⑧⑨⑩Species③⑦⑧⑨⑩①②①②①點擊②點擊③④求解類型:瞬態⑤點擊③④