大林算法控制器設計

1、2. Gs=e-1ss(s+1)采樣周期T0.5s，試用達林算法設計數字控制器D(z)。寫出設計過程，對比輸出與給定的效果波形，并顯示控制器輸出波形。 解：廣義對象的脈沖傳遞函數：Gz=Z1-e-TssGs=Z1-e-Tsse-1sss+1 =Ze-s-e-s1+T1s2s+1 =z-21-z-1Z1s2-1s+1s+1 =z-21-z-10.5z-11-z-12-11-z-1+11-e-0.5z-1 =z-30.1065(1+0.8474z-1)1-z-1(1-0.6065z-1)根據達林算法，構成的慣性環節與滯后時間=1s的純滯后環節串聯而成的理想閉環系統。設T=0.5ss=1Ts+1e-

2、s=e-1s0.5s+1它所對應的理想閉環脈沖傳遞函數：z=Z1-e-Tsss=Z1-e-Tsse-NTsTs+1 =z-N-11-e-TT1-e-TTz-1因?yàn)镹=T=2， T=0.5s， T=0.5s所以：z=0.632z-31-0.368z-1所求數字控制器為：Dz= zGz 1- z =0.632z-31-0.368z-1z-30.10651+0.8474z-11-z-11-0.6065z-1(1-0.632z-31-0.368z-1) =5.9341-z-1(1-0.6065z-1)1+0.8474z-1(1-0.368z-1-0.632z-3)在Gz中可以看到有一個零點z=-0.8

3、474靠近z=-1，所以如果不對達林算法進行修正必會產生振鈴現象，令因子(1+0.8474z-1)中的z=1即Gz=0.1967z-31-z-1(1-0.6065z-1)修正后的數字控制器為：Dz=3.2121-z-1(1-0.6065z-1)1-0.368z-1-0.632z-3仿真圖如下：已知某過程對象的傳遞函數為：Gs=3e-0.5s0.6s+1期望的閉環系統時間常數 T=0.25s ,采樣周期 T=0.5s 。試用大林算法設計數字控制器；解：被控對象為一階慣性環節，則廣義對象脈沖傳遞函數，閉環系統脈沖函數和數字調節器脈沖傳遞函數分別如下： G(z)=Z1-e-TssKe-sT1s+1=Kz-N-11-e-TT11-e-TT1z-1z=Z1-e-Tsse-sTs+1=z-N-11-e-TT1-e-TTz-1Dz= zGz 1- z =1-e-TT1-e-TT1z-1K1-e-TT11-e-TTz-1-1-e-TTz-N-1根據已知可得:K=3, T=0.25s, T=0.5s, N=T=0.50.5=1,T1=0.6所以：Gz=1.695z-21-0.435z-1z=0.865z