MP113REV111.3規格書091208.doc

1、MP113REV111.3規格書091208MEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:Meet with mega satisfaction承認書SPECIFICATION FOR ROVALPart No.MP113 Description: LED Power Supply Spe

2、cification Revision: 1.3 Customer.Customer roval No.:承認鑒章后請寄回承認書正本一份Please return to us one original of “SPECIFICATION FOR ROV AL” w ith your roved signatures.承認書ROVED SIGNATURES核準人 ROVED BY ： 日期 DATE ：蓋章鑒署 CHOP & SIGNATURES:深圳市麥格米特電氣技術有限公司SHENZHEN MEGMEET ELECTRICAL TECHNOLOGY CO.,LTDAdd: 6F Tower

3、2, Zhongjian Industrial Building18 Yanshan Road , Shekou, Shenzhen, P.R.ChinaZIP CODE:518067TEL: (0755)26805000 26693042 FA_: (0755)26805099 E-mail: doc/1e11336c3b3567ec102d8a89.MEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPE

4、RTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:Spec.Rev: Sl Rev.Date Description Safety by Mechanica by Electrical by1.0 1.0 2021/11/16 First issue shenchuchun ranhongjiangguichengcai 1.1 1.1 2021/11/30 UpdateTable2PeakCurrent shenchuchun ranhongjiang guichengcai 1.2 1.2 2021/12/03 UpdateTa

5、ble2PeakPower shenchuchun ranhongjiang guichengcai 1.3 1.3 2021/12/28 UpdateTable17PinConnectionshenchuchun ranhongjiangguichengcaiMEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD M

6、odel No.:Section 目錄1.Power supply overview 電性能指標1.1 Input Electrical Characteristics Overview （輸入特性） 1.2 Output Electrical Characteristics Overview （輸出特性）1.2.1 Output V oltage ,Current & Regulation.（輸出電壓電流調整率） 1.2.2 DC Output Ripple & Noise.（輸出紋波和噪聲） 1.2.3 Output Transient Response.（輸出動態響應） 1.2.4 DC

7、 Output Hold-Up Time.（輸出保持時間）1.2.4 DC Output Overshoot At Turn On & Turn Off.（輸出超調） 1.2.6 DC output voltage rise time （輸出上升時間） 1.3 Remote On/Off Control ：（遙控功能） 1.4 Protection: （保護功能） 1.4.1 DC output Over V oltage Protection.（輸出過壓保護） 1.4.2 DC Output Over current Protection.（輸出過流保護） 1.4.3 DC Output S

8、hort Circuit Protection.（輸出短路保護） 1.4.4 Reset After Shutdown.（保護功能復位）2.Isolation 絕緣性能3.Safety 安全規格4.EMC 電磁兼容性4.1 EMI （電磁干擾） 4.2 EMS （電磁抗擾）5.Environmental Requirement 環境 5.1 Temperature （環境溫度）5.2 Humidity （環境濕度） 5.3 Altitude （海拔高度）5.4 Cooling Method （冷卻方式） 5.5 Vibration （振動耐受） 5.6 Impact （沖擊耐受）6.Dimen

9、sion （物理尺寸）7.Weight （重量）8.Pin Connection (連接器腳位定義)9.Power Supply mounting （安裝尺寸）10.Package (包裝)MEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:1.Power Supply Overview 電性能

10、指標:1.1 Table 1 Input Electrical Characteristics Overview （輸入特性）Input voltage range 輸入電壓90Vac to 264Vac Normal voltage range 標稱輸入100Vac to 240Vac Frequency range 頻率范圍50Hz/60Hz5Ma_ input ac current滿載輸入電流1.0Ama_ at full load conditionInrush current (cold start)浪涌電流50Atyp peak, 120Vac; 100Atyp peak, 220

11、Vac Efficiency(full load) 效率 75min at 100Vac;Harmonic current 諧波電流Meet EN60065-20_2/IEC61000-3-2 class D Leakage Current 泄漏電流Less Than 0.5mA, 230Vac inputStandby Power Loss 待機功耗0.5W 240Vac input ,5VSB Output current10mA Input Fuse 輸入保險T3.15A/250Vac1.2 Output Electrical Characteristics Overview （輸出特性

12、） 1.2.1 Table 2 Output V oltage ,Current & Regulation.（輸出調整率）Output V oltage 輸出電壓 Regulation 調整率Min.current 最小電流 Load current range 帶載電流范圍Peak current orpower峰值電流或功率+V1(+25.6V) 24V30V 0.6 A+V2(+12V) 10.8V-14V 0.2 A 0.8A 1.5A 1A+5.0V +5.0V 50.3 A 2A 1A 1.5A +5.0V(STB) +5.0V 50.03 A 0.5A 0.1A 0.5A36W

13、Note:_The peak current or power should be test at other of dc output at Rated load ,And the peak current pulse width within 100ms 峰值電流或功率的測試是在其它額定負載時測試，且脈寬小于100毫秒。1.2.2 Table 3 DC Output Ripple & Noise.（輸出紋波和噪聲）Output V oltageRipple & Noise (Ma_.)+V2(+12V)120mVp-p25; 20_mVp-p-10 +5.0V50mVp-p25; 20_m

14、Vp-p-10 +5.0V(STB)60mVp-p25; 20_mVp-p-10; 150mVpp when STB Note: 1) Measurements shall be made with an oscilloscope with 20MHz bandwidth.示波器須設置在20兆赫茲帶寬2) Outputs shall be bypassed at the connector with a 0.1uF ceramic capacitor and a10uF electrolytic capacitor to simulate system loading.輸出須并聯0.1uF 的

15、陶瓷電容和10uF 的電解電容來模擬負載MEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:1.2.3 Output Transient Response.（輸出動態響應）Table 4.Test condition.測試條件V oltage Tolerance Limit Slew Rate

16、Load Change 5.0V/5.0VSB 5 12V/10 0.2A/uS Min.to 50 load and 50 to Ma_ load5.0V/5.0VSB 10 12V 100.2A/uS Min.load to Ma_ loadNote: Transient response measurements shall be made with a load changing repetitionrate of 50Hz to 10kHz.以5010KHz 的頻率跳變負載來測試。1.2.4 Table 5 DC Output Hold-Up Time.（輸出保持時間）Output

17、V oltage 120Vac input 220Vac input +V1(+25.6V) 5 mS 5mS +V2(+12V) 5 mS 5mS +5.0V 5mS 5mS +5.0V(STB)10 mS10 mSNote: All of dc output at full load.所有輸出帶滿載1.2.5 Table 6 DC Output Overshoot At Turn On & Turn Off.（輸出超調）Over shoot voltage(V)超調電壓Output ChannelOutput(V)Turn on 開機 Turn off 關機+V1(+25.6V) + 25

18、.6V 10 10 +V2(+12V) + 12V 10 10 +5.0V +5.0V 10 10 +5.0V(STB) +5.0V 10 10 Note: All of dc output current from Min.to Ma_.測試時負載范圍：最小到最大1.2.6 Table 7 DC output voltage rise time （輸出上升時間）Output V oltage120Vac input &Full Load220Vac input &Full Load+V1(+25.6V) 100mS 100mS +V2(+12V) 100 mS 100 mS +5.0V 10

19、0mS 100mS +5.0V(STB) 60 mS 50 mS Note: The output voltages shall rise from10 to 90 of their output voltage.輸出從10上升到90的時間MEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:1.

20、3 Remote On/Off Control ：（遙控功能）The power supply DC outputs (without +5.0Vsb) shall be enable with an active-highTTL(2.5V/2.0mA)-patible signal(Ps-on).The +5.0Vsb is on whenever the AC power is present.除5.0Vsb 外，其余輸出受控于一個TTL 電平兼容的信號（Ps-on 1.5V/2.0mA）, 5.0Vsb 上電就存在。_When Ps-on is pulled to TTL high, t

21、he DC outputs are to be enabled.Ps-on 高電平，打開輸出_When Ps-on is pulled to TTL low or open circuit, the DC outputs are to be disabled.Ps-on 低電平，關閉輸出 Table 8.Ps-on Signalments Outputs Ps-on- high1.5V&2.0mA ( source) Output Ps-on- low 0.8V_ Ps-on-open-_1.4 Protection: （保護功能）1.4.1 Table 9 DC output Over V

22、oltage Protection.（輸出過壓保護）Output V oltageTYP.Over V oltagements+V1(+25.6V) 36VHiccup 嘗試重復啟動 Note: The power supply shall be test at ma_ AC voltage (264Vac) and min load or no load.應該在最大交流輸入電壓264伏和輕載、空載下測試。1.4.2 Table 10 DC Output Over current Protection.（輸出過流保護）Note:_The over current protection shou

23、ld be test at other of dc output at Rated load 過流保護測試是在其它額定負載時測試.Output V oltage Over Current ments+V2(+12V) 1.2Atyp_Hiccup 嘗試重復啟動 +5V 2Atyp_Hiccup 嘗試重復啟動 +5.0VSTB1.5Atyp_Hiccup 嘗試重復啟動MEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE

24、 PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:1.4.3 Table 11 DC Output Short Circuit Protection.（輸出短路保護）Output V oltage ments +V2(+12V) Hiccup 嘗試重復啟動 +5V Hiccup 嘗試重復啟動 +5.0V(STB)Hiccup 嘗試重復啟動Note:_The Short Circuit protection should be test at other of dc output at Rated load短路保護測試是在

25、其它額定負載時測試.1.4.4 Reset After Shutdown.（保護功能復位）Recycle the ps-on signal, the power supply will restart after the fault removed.故障去除后，關掉Ps-on 信號再打開，電即可恢復。2.Isolation （絕緣性能） 2.1 Table 12 （絕緣阻抗）Input To Output DC500V 50M min (at room temperature)Input To FG DC500V 50M min (at room temperature)Output To F

26、GNon Isolated2.2 Table 13 （絕緣耐壓）Input To Output3000Vac 50Hz 1minute 10mA Input To FG 1500Vac 50Hz 1minute 10mA Output To FGNon IsolatedNote: Open FG and Output return.交流地和輸出負極要斷開。3.Safety （安全規格）The power supply shall pliance with the follog Criterion:電安全性滿足下列標準1) UL60950 2) EN609503) GB4943-1995MEGM

27、EET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:4.EMC （電磁兼容性）4.1 EMI （電磁干擾）The power supply shall pliance with the follog Criterion:電電磁干擾滿足下列規則：1) Conduction Emission : （傳導干擾

28、度） _EN55022, CLASS B _GB9254, CLASS B _FCC PART15 CLASS B2) Radiated Emission : （輻射干擾度） _EN55022, CLASS B _GB9254, CLASS B _FCC PART15 CLASS B注：The power board should be assembled in customers product to test forpassing the regulations 需配合用戶電路整機通過上述規則。4.2 EMS （電磁抗擾）The power supply shall pliance wit

29、h the follog Criterion:電電磁抗擾滿足下列規則：1) ESD （靜電抗擾度）_GB17626.2-1998/IEC61000-4-2 2) EFT （脈沖群抗擾度）_GB17626.4-1998/IEC61000-4-4 3KV 3) Surge （雷擊浪涌）_GB17626.5-1998/IEC61000-4-5 1.5KV / 3KV5.Environmental Requirement （工作環境）5.1 Temperature （環境溫度）_Operating: -10 to +40._Store: -20 to +80.5.2 Humidity （環境濕度）_O

30、perating: From 10to90 relative humidity (non-condensing)._Store: From 5 to 95 relative humidity (non-condensing).5.3 Altitude （海拔高度）_Operating: to 10,000 ft._Store: to 20,000ft.5.4 Cooling Method （冷卻方式） _Ventilation cooling .自然冷卻 5.5 Vibration （振動耐受）_10-55Hz, 19.6m/s 2(2G), 3minutes period, 60minute

31、s each along _, Y and Z a_is.5.6 Impact （沖擊耐受）MEGMEET 麥格米特電氣技術有限公司MEGMEET ELECTRICAL TECHNOLOGY CO., LTD.DESCRIPTION:(規格書)SPECIFICATIONTHESE SPECIFICATION ARE THE PROPERTY OF MEGMEET ELECTRICAL TECHNOLOGY CO., LTD Model No.:_49m/s 2(5G),11ms, once each _, Y and Z a_is.6.Dimension （物理尺寸）_100mm _ 140mm _11mm (長L _寬W _高H ).7.Weight （重量）_150g (Typ)8.Pin Conne