微機原理課程設計跑馬燈.doc

微機原理課程設計走馬燈運用8086最小模式和8255等芯片設計出一個跑馬燈電路，要求至少有5中花式，在ISIS 7 Professional軟件中運行。設計電路圖如圖所示：源代碼DATA SEGMENT DATA ENDS CODE SEGMENT ASSUME CS:CODE ,DS:DATA START :MOV AX,DATA MOV DS,AX MOV AL,10010000B OUT 96H,AL A0: IN AL,90H NOT AL MOV BL,AL OUT 92H,AL CMP AL,1 JNZ A3 A2: MOV DL,AL ;第一個開關實現從上至下的流水 OUT 92H,AL IN AL,90H NOT AL CMP AL,BL JNZ A0 MOV CX,50000 A1: LOOP A1 MOV AL,DL ROL AL,1 JMP A2 A3: CMP AL,2 ; 實現第二個開關從下至上的流水 JNZ A6 MOV AL,80H A5: MOV DL,AL OUT 92H,AL MOV CX,50000 A4: LOOP A4 IN AL,90H NOT AL CMP AL,BL JNZ A0 MOV AL,DL ROR AL,1 JMP A5 A6: CMP AL,4 ;第三個開關實現相隔的兩個燈自上而下流水 JNZ A9 MOV AL, 05H A8: MOV DL,AL OUT 92H,AL MOV CX,20000 A7: LOOP A7 IN AL,90H NOT AL CMP AL,BL JNZ A0 MOV AL,DL ROL AL,1 JMP A8 A9: CMP AL,8 ;第四個開關實現相隔的兩個燈從下而上流水 JNZ A12 MOV AL,0A0H A11: MOV DL,AL OUT 92H,AL MOV CX,20000 A10: LOOP A10 IN AL,90H NOT AL CMP AL,BL JNZ A0 MOV AL,DL ROR AL,1 JMP A11 A12: CMP AL,10H JNZ A17 A16: MOV AL,18H ;第五個開關實現從中間向兩邊流水 A14: MOV DL,AL OUT 92H,AL MOV CX,20000 A13: LOOP A13 IN AL,90H NOT AL CMP AL,BL JNZ A0 MOV AL,DL CMP AL,81H JZ A16 AND AL,0F0H MOV CX,0 MOV CH,AL ROL CH,1 MOV AL,DL AND AL,0FH MOV CL,AL ROR CL,1 ADD CH,CL MOV AL,CH JMP A14 A17: CMP AL,20H ;第六個開關實現從兩邊向中間流水 JNZ A0 A19: MOV AL,81H A20: MOV DL,AL OUT 92H,AL MOV CX,20000 A18: LOOP A18 IN AL,90H NOT AL CMP AL,BL JNZ A0 MOV AL,DL CMP AL,18H JZ A19 AND AL,0F0H MOV CX,0 MOV CH,AL ROR CH,1 MOV AL,DL AND AL,0FH MOV CL,